湖北省市、州交通局信息网络建设初探

文章介绍湖北省黄石市交通局机关结构化布线系统及信息网络建设，并针对市、州交通局信息网络建设总结了“网络建设实用化、工程实施规范化、培训工作系统化”的建设经验。     

考虑胎体复杂变形的轮胎非稳态侧偏特性理论模型

本文从肥体的一般变形模式出发，根据胎体的侧向弯曲变形及扭转变形计算出胎面的侧向瞬时变形，从而建立了小幅运动时轮胎非稳态侧偏特性理论模型。考虑胎体的复杂变形之后，模型能真实地反映轮台力学特性和物理实质。     

双壳型船体结构稳态温度场和温度应力

用简化解析方法和有限元数值方法,分析了双壳型船体货舱区域在运载高温液货时的稳态温度场;根据船体结构的温度分布,用有限元法计算了其温度应力,同时与货物压力、海水静动压力、总纵弯矩等载荷作用下的结构应力做了比较。研究结果表明：在货舱结构温度场分析中用简化分析方法和有限元数值方法所得的计算结果相当一致;高温液货大幅度增加船体结构的纵向应力和横向应力,同时加剧结构不连续处的应力集中;槽型舱壁可以有效地释放     

Experimental analysis of tyre-enveloping characteristics at low speed

In this study, experiments are conducted to investigate tyre-enveloping characteristics. Four different types of tyres are tested. Parameters such as different tyre inflation pressures, vertical loads and types of obstacles (cleats) are considered. In addition to vertical stiffnesses of all tyres, vertical and horizontal force variations while traversing different obstacles at low speed are studied. The effects of inflation pressure and vertical load on variations of force and moment are investigated. Static test results showed that after a certain vertical displacement, all curves in force–deflection diagrams plotted with and without cleat intersect regardless of cleat and tyre types, depending on the inflation pressure of the tyre, which can be called typical static tyre-enveloping characteristics. Test results at low speed show that there is a considerable influence of the vertical load on vertical and lateral force responses of a tyre.     

世界第一高钢桁梁斜拉桥动力特性试验研究

以跨径为720 m、桥面距地面516 m的世界第一高钢桁梁斜拉桥—北盘江大桥为例,采用有限元软件MIDAS/CIVIL2016建立有限元模型,进行大桥自振特性理论分析。介绍了钢桁架斜拉桥动力荷载试验方法和过程,对大桥的固有频率、动应变等实测参数与理论进行了对比。试验结果表明,大桥数值分析与实测数据吻合较好,实测整体刚度大于理论刚度,具有一定的安全储备,结构受力特性正常,可为同类钢桁梁斜拉桥检测评定提供参考。     

水下盾构隧道管片钻穿引起的涌水突泥治理技术研究

水下盾构隧道管片钻穿会引起大量涌水突泥，对隧道建设及运营造成重大影响，且采取的隧道修复措施将影响隧道的长期运营安全。以某地铁隧道被意外钻穿的实例为工程背景，为确保水下隧道意外钻穿破坏时，可以做到临时封堵有效，永久修复满足百年使用要求，提出修复思路。在水面利用浮船进行海上袋装水泥封堵，然后筑岛截断隧道与海水的联系； 临时封堵后监测管片变形、复核隧道中线，明确钻孔对隧道限界的影响； 通过计算对结构安全性进行评价，明确钻孔对管片结构受力影响较小。在确保隧道钻穿对隧道限界及结构的影响可控后，采取地面注浆、洞内注浆、倒锥形封堵、洞内设置内撑钢板相结合的方案，对隧道钻穿处进行治理，保证隧道的安全运营。在隧道周边施工时，应加强隧道保护意识，避免对既有隧道造成破坏。     

精密仪器中光电探测器件的特性与选用

在光电技术产业化过程中，光电器件的重要性日益显现。光电器件的种类很多，功能各异。如何掌握各种光电器件的特性及正确选用光电器件是光电技术实际应用中的关键。在对一个光电系统的性能指标进行评价时，系统所选用的光电器件的性能参数指标已经成为最重要的影响因素之一。本文介绍了常用光电器件的主要特性，对常用光电器件进行了对比。讨论了光电器件应用选择时的注意事项与技巧，并对选用光电器件的基本原则进行了总结。     

3D brush model to predict longitudinal tyre characteristics

A 3D tyre brush model, which aims to predict the longitudinal tyre characteristic under steady-state conditions by modelling the occurring physical effects in the tyre–road contact patch, is presented. The model includes an analytical method to describe the tyre footprint geometry, the pressure distribution, the slip due to the lateral tyre contour, the slip due to braking or traction and the longitudinal as well as the lateral shear stresses on a flattened tyre. The presented development tool offers a method to investigate different rubber friction data (caused by different tread compounds and/or surface textures) and to analyse its influence on longitudinal tyre characteristics. The tyre design is fixed (same casing, dimension and pattern). The results include the shear stresses as well as the different sliding velocities in the contact patch for different slip conditions. The model was developed for a standard summer pattern design and a standard tyre dimension (205/55R16). It can also be adapted to other tread designs and tyre dimensions. To offer a good comparability between model results and test bench measurements, the surface curvature of an internal test rig is considered.     

佛山市南庄大桥结构设计与静力分析

基于主跨268 m的佛山市南庄大桥,介绍独塔双索面混合梁斜拉桥的结构体系和施工方案,研究得到该桥合理的成桥状态.在此基础上,分别给出施工状态和成桥状态下的静力分析结果,并对结构的整体稳定安全性进行评估.     

Application of the Pareto-optimal approach for selecting dynamic characteristics of seat suspension systems

In this paper, a method for selecting the dynamic characteristics of seat suspension systems is presented. The basic principle of such a method consists in the shaping of nonlinear seat suspension dynamic behaviour for the different requirements defined by machine operators. A combined optimisation procedure has allowed to find the Pareto-optimal system configuration with simultaneous minimisation of conflicted optimisation criteria: the suspended body acceleration and suspension travel. As an example of the proposed method, the seat with a viscous-elastic passive suspension is investigated and its vibro-isolation properties are shaped by the air-spring and shock-absorber force characteristics.