兰州地铁地温分布特性及其演化规律

以兰州地铁所在地区为研究对象,实测地铁隧道开挖前的地温(简称为初始地温),根据实测数据,提出地铁初始地温预测模型公式。采用非稳态传热的数值模型,分析运营条件下地铁隧道围岩温度的演化规律。结果表明:兰州地铁初始地温随环境气温和埋深的变化而变化;年变温层位于自地表至埋深12m处;年恒温层位于埋深12m及其以下,温度为15℃左右;年变温层中,1年内初始地温变化规律与环境气温变化规律相似,近似呈正弦曲线状分布,但存在相位滞后的现象;1年中初始地温的振幅随埋深的增大呈指数下降趋势。在隧道内空气与围岩之间热交换中,兰州地铁隧道围岩的温度及其梯度、热透厚度(未达到极限时)均与隧道内环境温度、热交换时间成正相关关系,但与距隧道内壁的距离成负相关关系。     

超高层混凝土结构竖向变形分析与补偿研究

马来西亚四季酒店项目为342.5 m超高层混凝土结构,结构形式为框架-核心筒;依据施工现场合理的施工顺序及进度计划安排、不同施工阶段的高强混凝土特性的试验数据等,建立ETABS数值模型,分析出结构竣工和30年补偿周期时不同竖向构件的总竖向变形量以及相互之间的竖向变形差;施工过程中对已施部位监控点采取全程有效监测的方式来矫正分析数据,并采用"平层效应"和"层差补偿"的过程管控方式来弥补竖向构件的竖向变形量;最终通过分析比较结构竣工时现场监测点的实测数据与模型分析数据,验证了数据分析及竖向变形过程控制措施的合理性,取得了良好的效果。     

某型直流充电柜温度场仿真

对某型直流充电柜满负载工况下温度场进行仿真,根据实验测量数据验证仿真结果准确性,成功完成了对充电柜温度场的建模仿真工作,并实现对初始模型的简化,为对整个充电站进行温度场建模仿真奠定了基础。     

Analysis of cross effect on inherent deformation during the line heating process – Part 1 – Single crossed heating lines

This paper describes the effect of previous heating on inherent deformation by a subsequent heating line, more specifically, the case of two heating lines intersecting (crossing) each other. The paper has been divided into two parts. In the first part, the case of single crossed heating lines is studied in detail. The second part of the paper, discusses the case of more than one crossed heating lines. The novelty of the work lies in revealing the cross effect and how, factors such as, for example, the heating condition and the plate geometry, influence the resulting inherent deformation of crossed heating. In addition, relationships to easily get these influences are provided. The results are suitable for a wide range of heating conditions and plate thickness.     

Career development for women in maritime industry: organisation and socialisation perspectives

For centuries, the maritime industry has been a recognised place in society dominated solely by men, and even though there were women involved, they were mostly on the periphery. This research aims to fill the gap of women’s career development in this field, by investigating the relationships among the degree of organisational socialisation, women’s workplace culture, and the career development of women in the maritime workplace. The analyses are conducted with the structural equation model with 202 valid questionnaires. The results indicated that women’s workplace culture has a significantly negative relationship with the degree of organisational socialisation, and then in turn, it has a significantly positive relationship with women’s career development in the maritime industry. Finally, the results also indicate that the mediating effect of organisational socialisation existed between women’s workplace culture and women’s career development. According to the empirical analysis, this study makes conclusions as well as suggestions for the maritime enterprises as the reference for human resource management.     

The problem of cold starts: A closer look at mobile source emissions levels

While the phenomenon of excess vehicle emissions from cold-start conditions is well known, the magnitude and duration of this phenomenon is often unclear due to the complex chemical processes involved and uncertainty in the literature on this subject. This paper synthesizes key findings regarding the influence of ambient and engine temperatures on light-duty vehicle (LDV) emissions. Existing literature, as well as analytical tools like the U.S. Environmental Protection Agency’s Motor Vehicle Emission Simulator (MOVES), indicate that while total vehicle emissions have dropped significantly in recent years, those associated with cold starts can still constitute up to 80% for some pollutant species. Starting emissions are consistently found to make up a high proportion of total transportation-related methane (CH₄), nitrous oxide (N₂O), and volatile organic compounds (VOCs). After 3–4 min of vehicle operation, both the engine coolant and the catalytic converter have generally warmed, and emissions are significantly lower. This effect lasts roughly 45 min after the engine is shut off, though the cooling rate depends greatly on the emission species and ambient temperature. Electrically (pre-)heated catalysts, using the bigger batteries available on hybrid drivetrains and plug-in vehicles, may be the most cost-effective technology to bring down a sizable share of mobile source emissions. Trip chaining (to keep engines warm) and shifting to non-motorized modes for shorter trips, where the cold start can dominate emissions, are also valuable tactics.     

大跨度钢箱梁斜拉桥中跨合龙关键技术

以4座主跨超过400 m的钢箱梁斜拉桥中跨合龙控制为背景,对大跨度钢箱梁斜拉桥中跨合龙的2种方法进行对比分析,对合龙各主要工序的关键技术进行研究。提出了合龙段配切长度的计算公式和合龙口宽度连续观测的测点布置方式。建议:在调整好合龙口姿态后可不加压重,也可不采用临时劲性骨架锁定;采用无线采集设备采集合龙口结构的温度场,用激光测距仪测量合龙口宽度以提高观测效率和安全性;在悬臂施工阶段关注梁长累计误差并通过调整后续梁段的制造长度消除之。     

面向控制的SCR催化转化器温度模型

为了建立面向控制的SCR催化器温度模型,根据能量守恒和质量守恒方程并考虑热平衡中所涉及的换热过程不同,建立了4种SCR催化器温度的数学模型,并利用Matlab/Simulink构建图形化的计算模型。采用柴油机欧洲稳态循环(ESC)和欧洲瞬态循环(ETC)条件下的台架实测数据对模型进行检验,基于最大离散程度、拟合度和计算时间3个指标对模型进行评价和比较。结果表明,考虑催化器与废气和周围环境对流换热的温度模型具有良好的预测精度和实时性,更适合用于SCR控制策略。     

掺混甲烷对乙烯层流预混火焰炭烟形貌的影响

针对掺混甲烷的乙烯层流火焰中的炭烟颗粒从形貌角度进行了研究,构建了具有相同当量比(2.07)、火焰温度、气体流速的层流预混乙烯火焰和掺混甲烷的乙烯火焰,并各自选取了3个高度进行热泳探针取样,采用TEM和AFM方法对各个工况的炭烟颗粒粒径分布、平均粒径、平均体积当量球径进行了对比。发现少量的甲烷掺混会令乙烯火焰中炭烟颗粒的尺寸变大,而当甲烷掺混量变多时该现象消失。而通过对颗粒的圆度、球度和分形维数计算和分析,发现即使是很小的颗粒也具有相似的不规则形状,这一现象广泛存在于各种火焰和各种大小的颗粒中,不受掺混比的影响,并且越大的颗粒结构越松散。     

温度变化引起桥梁裂缝的分析与预防

温度裂缝是桥梁裂缝常见形式之一,通过对温度裂缝产生原因的分析,提出了可以借鉴和使用的预防方法,希望对桥梁施工有所帮助。