客车空气弹簧悬架分析与研究

对空气弹簧悬架的发展进行了阐述,同时分析了空气弹簧悬架组成、结构、计算方法及空气弹簧悬架的关键技术.     

Parameters optimisation of a vehicle suspension system using a particle swarm optimisation algorithm

The purpose of this paper is to determine the lumped suspension parameters that minimise a multi-objective function in a vehicle model under different standard PSD road profiles. This optimisation tries to meet the rms vertical acceleration weighted limits for human sensitivity curves from ISO 2631 [ISO-2631: guide for evaluation of human exposure to whole-body vibration. Europe; 1997] at the driver's seat, the road holding capability and the suspension working space. The vehicle is modelled in the frequency domain using eight degrees of freedom under a random road profile. The particle swarm optimisation and sequential quadratic programming algorithms are used to obtain the suspension optimal parameters in different road profile and vehicle velocity conditions. A sensitivity analysis is performed using the obtained results and, in Class G road profile, the seat damping has the major influence on the minimisation of the multi-objective function. The influence of vehicle parameters in vibration attenuation is analysed and it is concluded that the front suspension stiffness should be less stiff than the rear ones when the driver's seat relative position is located forward the centre of gravity of the car body. Graphs and tables for the behaviour of suspension parameters related to road classes, used algorithms and velocities are presented to illustrate the results. In Class A road profile it was possible to find optimal parameters within the boundaries of the design variables that resulted in acceptable values for the comfort, road holding and suspension working space.     

8米后置客车行驶左右摇晃原因探讨

针对某6820型后置旅行客车行驶过程中出现的车身摇晃现象，设计人员简要地从悬架系统的配置及布置方式对故障产生原因进行了分析与探讨。     

超大跨度双跨钢桁梁悬索桥动力特性分析和模态试验

以跨径布置460 m+1480 m+491 m的一座双跨钢桁梁悬索桥结构为工程背景,充分考虑结构几何非线性效应、大位移非线性效应等因素的影响,建立了算例桥梁的MIDAS空间有限元分析模型,对基本动力特性进行了仿真分析和结构振动试验测试;对成桥结构进行动力特征参数测试,并与理论计算值进行了对比分析,该桥实测动力特征参数与对应理论计算值基本吻合,且测试值大于理论计算值,这表明成桥结构实测刚度大于理论设计目标值。     

斜交框构桥顶进施工技术

随着公路交通事业的发展,许多新建公路需在下侧穿越铁路,为不中断列车的运营,需进行框构桥顶进施工。该文结合工程实例,介绍斜交顶进框构桥的施工技术和措施,可供同行借鉴。     

Roll- and pitch-plane coupled hydro-pneumatic suspension

Passive fluidically coupled suspensions have been considered to offer a promising alternative solution to the challenging design of a vehicle suspension system. A theoretical foundation, however, has not been established for fluidically coupled suspension to facilitate its broad applications to various vehicles. The first part of this study investigates the fundamental issues related to feasibility and properties of the passive, full-vehicle interconnected, hydro-pneumatic suspension configurations using both analytical and simulation techniques. Layouts of various interconnected suspension configurations are illustrated based on two novel hydro-pneumatic suspension strut designs, both of which provide a compact design with a considerably large effective working area. A simplified measure, vehicle property index, is proposed to permit a preliminary evaluation of different interconnected suspension configurations using qualitative scaling of the bounce-, roll-, pitch- and warp-mode stiffness properties. Analytical formulations for the properties of unconnected and three selected X-coupled suspension configurations are derived, and simulation results are obtained to illustrate their relative stiffness and damping properties in the bounce, roll, pitch and warp modes. The superior design flexibility feature of the interconnected hydro-pneumatic suspension is also discussed through sensitivity analysis of a design parameter, namely the annular piston area of the strut. The results demonstrate that a full-vehicle interconnected hydro-pneumatic suspension could provide enhanced roll- and pitch-mode stiffness and damping, while retaining the soft bounce- and warp-mode properties. Such an interconnected suspension thus offers considerable potential in realising enhanced decoupling among the different suspension modes.     

V型墩连续刚构桥施工监控分析

佛山南庄二桥是V型墩连续刚构桥，梁体采用移动支架悬臂施工，均为动态成形，高空作业，故该桥的施工控制成为保证桥梁施工质量的关键因素。文章介绍了该桥施工监控的控制思路和现场测点布置、测量的内容，重点阐述了结构线形控制的实施过程，为同类桥梁的施工控制提供参考依据。     

T型梁吊装方式的改进

传统T型梁吊装方式多采用捆绑式,其存在很多弊病,采用新型的吊装方式可方便工人的操作,增加施工的安全性,也可增大T型梁的提升高度,保证安装顺利进行。     

电磁永磁混合磁悬浮列车的磁铁结构优化设计

根据力学模型提出了增大混合磁铁磁轭高度以提高承载力的方法,从承载能力、可控性及永磁工作点3个角度展开对混合磁铁结构参数的优化分析。理论分析及仿真结果表明,适当增大永磁截面积在满足系统承载力要求的同时能提高磁铁可控性;合理选取永久磁铁的截面积和厚度参数能保证磁铁工作在最大能积点。     

客车底盘车架焊接结构分析及其精度工艺保证

分析客车底盘车架焊接结构,确定使客车底盘车架中段、前段、后段和行李舱骨架的变形量小的焊接工艺,使得整个底盘车架三段部分的焊接质量、形位精度满足设计和使用要求。