浅析涂装涂膜缺陷分析工具及方法

文章结合涂装车间生产现场实例,介绍了涂膜缺陷在线放大观察法,偏光显微镜法,逐层打磨+在线放大观察法,断面取样+显微放大法,扫描电镜+能谱分析仪法所使用工具,操作方法,优缺点及实例图片,对涂膜缺陷分析具有一定得指导意义。     

汽车营销专业工作室制人才培养模式探究

文章以汽车营销专业为例,从汽车小微企业和高职院校人才培养困局入手,综合考虑学校、企业、政府和学生各方利益,提出较为合适的就业工作室组合订单人才培养模式,并对该人才培养模式的内容和具体实施进行了阐述。     

钻爆法施工隧道噪声传播特性研究

钻爆法施工的隧道囿于半封闭环境和大功率高噪声机械分布集中的特点,施工噪声问题相比地面工程更加严峻。其中,尤以钻炮眼工序声压级最高。为研究隧道施工过程中工人接触的噪声大小和类型以及噪声在隧道内的传播规律,依托拉泽快速路圭嘎拉隧道工程,通过施工现场实测和Comsol Multiphysics软件声学数值模拟互相验证,发现掌子面工人工作区域的中高频噪声普遍达到105 dB(A)及以上,掌子面钻炮眼噪声传播至二次衬砌和仰拱区域后仍达到90dB(A),同时危害二次衬砌和仰拱区域施工人员健康。洞内空间声压级分布受洞内构筑物和边界条件影响,轴线方向衰减速率不均匀,同一断面内声能量由于拱形断面声聚焦效应,呈现同一断面内底板中线以上3～4 m局部声压级高于拱周的状态。     

TLA/SBR复合改性沥青性能试验研究

为了改善特立尼达湖沥青(简称TLA)改性沥青低温抗裂性,提出用丁苯橡胶(SBR)对其改性,期望综合两种改性剂的优点。对不同掺量的TLA与SBR复合改性沥青进行了常规试验(针入度、软化点、延度、旋转粘度)、DSR试验、BBR试验,并测试了短期老化与长期老化后的残留针入度比,研究TLA与SBR掺量对高、低温性以及抗老化性能的影响。研究结果表明:①掺入SBR与TLA均能改善沥青的高温抗变形能力和感温性,对比TLA,SBR对沥青高温性能的改善效果更显著;②TLA对复合改性沥青的低温性能有不利影响,但掺入SBR可以抵消这种不利影响;③掺加5%~20%的TLA能改善复合改性沥青的抗老化性能,在此TLA掺量下,SBR也能改善沥青的抗老化性能。④综合高、低温性能和老化性能的表现,最佳掺量为20%的TLA+3%的SBR。     

冰雪条件下中国驾驶员跟驰行为及模型研究

分析驾驶员在冰雪条件下的驾驶行为特性,建立考虑驾驶员行为特性的跟驰模型,有助于丰富现有交通流理论.通过招募驾驶员开展实车跟驰试验,对比分析正常条件与冰雪条件下的驾驶行为差异.进而基于任务难度均衡理论构建包含人类因素参数的任务难度模块,引入改进后的智能驾驶员模型,并采用车辆轨迹数据对模型进行标定和有效性验证.研究表明：驾驶员在跟驰行驶过程中受外界刺激及自身驾驶能力影响时会对车辆行驶状态进行动态调整,试图保持期望间距,且速度与前车一致的状态;冰雪条件下驾驶员采取风险补偿行为,其车头时距波动幅度较正常条件收窄,模型引入人类因素参数可以较好地描述其差异性. 模型有效性验证表明,新模型在6个仿真场景中的表现都优于传统智能驾驶员模型,且表现出更好的鲁棒性.研究结果可为冰雪条件下的交通管理措施制定提供理论支持.     

Comparing different contour methods with response-based methods for extreme ship response analysis

Environmental contours are often applied in probabilistic structural reliability analysis to identify extreme environmental conditions that may give rise to extreme loads and responses. They facilitate approximate long term analysis of critical structural responses in situations where computationally heavy and time-consuming response calculations makes full long-term analysis infeasible. The environmental contour method identifies extreme environmental conditions that are expected to give rise to extreme structural response of marine structures. The extreme responses can then be estimated by performing response calculations for environmental conditions along the contours.Response-based analysis is an alternative, where extreme value analysis is performed on the actual response rather than on the environmental conditions. For complex structures, this is often not practical due to computationally heavy response calculations. However, by establishing statistical emulators of the response, using machine learning techniques, one may obtain long time-series of the structural response and use this to estimate extreme responses.In this paper, various contour methods will be compared to response-based estimation of extreme vertical bending moment for a tanker. A response emulator based on Gaussian processes regression with adaptive sampling has been established based on response calculations from a hydrodynamic model. Long time-series of sea-state parameters such as significant wave height and wave period are used to construct N-year environmental contours and the extreme N-year response is estimated from numerical calculations for identified sea states. At the same time, the response emulator is applied on the time series to provide long time-series of structural response, in this case vertical bending moment of a tanker. Extreme value analysis is then performed directly on the responses to estimate the N-year extreme response. The results from either method will then be compared, and it is possible to evaluate the accuracy of the environmental contour method in estimating the response. Moreover, different contour methods will be compared.     

Fracture mechanics analysis for mooring chain links subjected to out-of-plane bending (OPB)

A fracture mechanics (FM) based investigation on the mechanism of out-of-plane bending (OPB) between mooring chain links and its effects on fatigue lives of mooring chain links are conducted. Four types of OPB problems that mooring chain links laying on the chain wheel, chain links passing over the bending shoe, chain links constraint provided by the chain hawse, and chain links constraint provided by the chain stopper are considered. Tension ranges of mooring lines are calculated based on the combined loading process induced by the motions of wave frequency (WF) and low frequency (LF). Initial cracks are assumed to propagate from surfaces of chain links and stress intensity factors are calculated in terms of stress ranges determined by a finite element (FE) analysis. The results show that fatigue lives of mooring chain links are decreased significantly due to OPB effects. In addition, the increase of the number of pockets of chain wheel mitigates OPB effects on fatigue lives of mooring chain links laying on the chain wheel, and the increase of the track diameter would reduce OPB effects on fatigue lives of mooring chain links passing over the bending shoe as well. However, for chain links constraint provided by the chain hawse, the diameter of mooring chain hawse has no significant effect on fatigue lives of the mooring chain links subject to OPB if without the abrupt change of the contact conditions between chain links and chain hawse. For mooring links constraint provided by chain stoppers considering the effect of proof loading test, fatigue lives of mooring chain links would drop significantly with the increase of interlink angles and friction coefficient.     

A signal decomposition method based on repeated extraction of maximum energy component for offshore structures

Contrary to most signal decomposition methods that usually decompose an original signal into a series of components simultaneously, a novel approach based on repeated extraction of Maximum Energy Component (MEC) is proposed. The approach starts from determination of the MEC referring to the estimated Power Spectral Density (PSD) function, and then represents the MEC by employing an exponential function to fit the original signal. By defining a stopping criterion based on two adjacent estimated PSDs, each MEC can be accurately extracted with an improved performance throughout the entire signal decomposition. To verify the proposed method, a single degree-of-freedom system subject to harmonic loads has been examined. Numerical results show that the analytical response can not only be decomposed into four MECs corresponding to the excitation and the system, respectively, but also provide an accurate estimation of natural frequency and damping ratio of the system. Meanwhile, by observing results from the Ensemble Empirical Mode Decomposition (EEMD), Variational Mode Decomposition (VMD) and Prony based on state-space model (Prony-SS), an improved decomposition accuracy has been achieved from the proposed approach. Furthermore, experimental data from the Norwegian Deepwater Programme and two sets of field-test data from one fixed offshore platform and an offshore wind turbine have been used to demonstrate the correctness of the developed signal decomposition method. It is noted that divergence in results by Prony-SS can be observed when a very large model order is used, while the proposed method provides the better decomposition and reconstruction of signals.     

哈尔滨市城市交通拥堵原因及解决措施

城市交通拥堵问题表象在城市道路交通,其根源受城市的自然环境、气候、历史、规划以及市民岀行习惯等方面影响。全面、客观地分析总结了影响哈尔滨城市交通拥堵的原因,对解决城市交通拥堵问题进行了思考,并提出了建议和具体措施。     

渝黔铁路新白沙沱长江特大桥施工关键技术

以某双层6线大跨度铁路钢桁梁斜拉桥为例,针对大桥设计荷载重,结构设计新颖、施工环境复杂的特点,对施工方案进行研究。提出了深水无覆盖层倾斜岩面基础施工技术、拼装式多用途桁片技术、跨多股道既有铁路干线顶推施工技术、双层铁路钢桁梁双悬臂架设施工技术4项技术要点,确保了大桥的安全快速优质建成。