基于自适应遗传算法的路堤边坡稳定性分析方法

基于圆弧滑动面假定,提出了一种用自适应遗传算法搜索最危险滑动面及其对应的最小安全系数的新方法。该方法是一种改进的遗传算法,采用自适应求取适值、动态调整交叉率和变异率、自适应区间收缩。自适应遗传算法有效克服了传统方法易陷入局部极小的缺陷,提高了算法的搜索效率、精度和稳定性。     

沥青路面破损程度分级与破损换算系数取值的探讨

本文分析现行规范中对沥青路面破损程度、密度分级以及破损换算系数取值中存在问题,通过分析沥青路面破损程度与路面使用状况关系,结合沥青路面养护措施,提出沥青路面裂缝破损密度分级的方法,并对车辙破损严重程度分级标准、裂缝和车辙破损换算系数的修正值提出建议。     

Consumer preferences and willingness to pay for advanced vehicle technology options and fuel types

The automotive industry is witnessing a revolution with the advent of advanced vehicular technologies, smart vehicle options, and fuel alternatives. However, there is very limited research on consumer preferences for such advanced vehicular technologies. The deployment and penetration of advanced vehicular technologies in the marketplace, and planning for possible market adoption scenarios, calls for the collection and analysis of consumer preference data related to these emerging technologies. This study aims to address this need, offering a detailed analysis of consumer preference for alternative fuel types and technology options using data collected in stated choice experiments conducted on a sample of consumers from six metropolitan cities in South Korea. The results indicate that there is considerable heterogeneity in consumer preferences for various smart technology options such as wireless internet, vehicle connectivity, and voice command features, but relatively less heterogeneity in the preference for smart vehicle applications such as real-time traveler information on parking and traffic conditions.     

太阳能游船光伏逆变器控制系统EMC设计

从船舶环境和光伏逆变器的基本原理和功能出发,分别对太阳能游船EMC干扰源和干扰路径进行分析,通过信号滤波与保护、工艺设计和试验测试,实现高可靠性的太阳能游船光伏逆变器控制系统研究和设计,为太阳能游船的光伏逆变器控制系统研究提供基本EMC设计思路与实现技巧。     

Spatiotemporal influence of land use and household properties on automobile travel demand

Understanding the patterns of automobile travel demand can help formulate policies to alleviate congestion and pollution. This study focuses on the influence of land use and household properties on automobile travel demand. Car license plate recognition (CLPR) data, point-of-interest (POI) data, and housing information data were utilized to obtain automobile travel demand along with the land use and household properties. A geographically and temporally weighted regression (GTWR) model was adopted to deal with both the spatial and temporal heterogeneity of travel demand. The spatial-temporal patterns of GTWR coefficients were analyzed. Also, comparative analyses were carried out between automobile and total person travel demand, and among travel demand of taxis, heavily-used private cars, and total automobiles. The results show that: (I) The GTWR model has significantly higher accuracy compared with the Ordinary Least Square (OLS) model and the Geographically Weighted Regression (GWR) model, which means the GTWR model can measure both the spatial and temporal heterogeneity with high precision; (II) The influence of built environment and household properties on automobile travel demand varies with space and time. In particular, the temporal distribution of regression coefficients shows significant peak phenomenon; and (III) Comparative analyses indicate that residents’ preference for automobiles over other travel modes varies with their travel purpose and destination. The above findings indicate that the proposed method can not only model spatial-temporal heterogeneous travel demand, but also provide a way to analyze the patterns of automobile travel demand.     

Autonomous cars: The tension between occupant experience and intersection capacity

Systems that enable high levels of vehicle-automation are now beginning to enter the commercial marketplace. Road vehicles capable of operating independently of real-time human control under an increasing set of circumstances will likely become more widely available in the near future. Such vehicles are expected to bring a variety of benefits. Two such anticipated advantages (relative to human-driver vehicle control) are said to be increased road network capacity and the freeing up of the driver-occupant’s time to engage in their choice of leisurely or economically-productive (non-driving) tasks.In this study we investigate the implications for intersection capacity and level-of-service of providing occupants of automated (without real-time human control), autonomously-operating (without vehicle-to-X communication) cars with ride quality that is equivalent (in terms of maximum rates of longitudinal and lateral acceleration) to two types of rail systems: [urban] light rail transit and [inter-urban] high-speed rail. The literature suggests that car passengers start experiencing discomfort at lower rates of acceleration than car drivers; it is therefore plausible that occupants of an autonomously-operating vehicle may wish to instruct their vehicle to maneuver in a way that provides them greater ride comfort than if the vehicle-control algorithm simply mimicked human-driving-operation.On the basis of traffic microsimulation analysis, we found that restricting the dynamics of autonomous cars to the acceleration/deceleration characteristics of both rail systems leads to reductions in a signalized intersection’s vehicle-processing capacity and increases in delay. The impacts were found to be larger when constraining the autonomous cars’ dynamics to the more-restrictive acceleration/deceleration profile of high-speed rail. The scenarios we analyzed must be viewed as boundary conditions, because autonomous cars’ dynamics were by definition never allowed to exceed the acceleration/deceleration constraints of the rail systems. Appropriate evidence regarding motorists’ preferences does not exist at present; establishing these preferences is an important item for the future research agenda.This paper concludes with a brief discussion of research needs to advance this line of inquiry.     

Flying with climate liability? Economic valuation of voluntary carbon offsets using forced choices

This study aims to examine how key aspects of voluntary climate action influence economic values of aviation carbon offsets using an Australian case study, where voluntary carbon offset programs for the aviation sector were active under a carbon tax between July 01, 2012 and July 17, 2014. An online survey was administered during the period using choice experiments. This rare and short-lived Australian experience is useful to gain insights into how individuals respond to the new public policy in terms of the perceived economic value of voluntary offsets for air travel. According to the estimation results, supporters of the mandatory tax policy held a welfare value of voluntary carbon offsets for their domestic flights that is three times larger than non-supporters (i.e., $AU27.83 vs. $AU9.40). It is $AU12.27 on average per ton of carbon offsets per person for domestic flights and $AU0.92 for international long-haul flights. The findings endorse that individuals seem to attach personal responsibility for carbon emissions (i.e. climate liability or carbon conscience) to frequent domestic flights, but not so much to intercontinental flights. Furthermore, reported flight frequencies by respondents did not place any significant impact on economic values of voluntary carbon offsets in both domestic and international frameworks. A coupled approach between forced choices and certainty responses was adapted, where no-choice options were retrieved, potentially improving choice experiments. Results suggest that airlines should consider simplifying their carbon offset programs to fixed levels (e.g. £3, £10, and £20 as in the case of British Airways), regardless of geographical boundaries, while governments should promote both mandatory and voluntary climate measures in tandem.     

Hierarchal assessment of noise pollution in urban areas – A case study

Noise pollution in urban areas has many harmful effects on the citizens. There are varieties of noise generation sources of which the traffic noise could be a major source. The point which is perhaps less noticed is that sound level is not the only parameter to indicate the extent and intensity of noise pollution. Situation of urban land uses, distribution of population centers and types of passages can deeply affect the concern on this environmental issue but not with a similar ratio. This article presents an overlaying technique to define noise prone areas using all different factors involved. A case study was carried out in the District 14 of Tehran Metropolitan City where there are busy streets and highways. For this purpose, the share of each criterion in noise pollution intensity was determined using Analytical Hierarchy Process (AHP). Afterwards, the map layers were overlaid based upon the relative importance of the criteria to get the final map on which the noise prone areas are specified. The developed method could be used as a tool for indirect estimation of noise pollution by which instead of direct measurement of the equivalent sound level, it would be possible to predict noise susceptible areas considering the most important influential factors.     

公路建设项目征地拆迁补偿费用确定与控制方法研究

文中以广东省公路建设项目征地拆迁费用的确定为例,以现行实施的征地拆迁补偿相关规定为基础,探讨征地数量和标准的计量、计算方法,建立征地拆迁标准动态数据库,以期对征地拆迁费用的确定和控制提供思路和实际操作指导。     

桥梁模板施工技术应用性研究

桥梁模板是桥梁施工中的重要工具。通过搜集国内外桥梁模板资料,研究总结并提出解决模板工程在桥梁施工中存在各种问题的办法,将对提高工程质量、加快施工速度、提高劳动生产率、降低工程成本和实现桥梁工程的文明施工起到一定的推动作用。