绝热材料下沉对蒸汽管道热损失的影响

文中从绝热材料下沉的角度，利用形状因子法对高温蒸汽管线保温问题进行了探讨。通过理论分析和实验测试，得出了“复合硅酸盐保温涂料＋复合硅酸盐保温型材＋复合硅酸盐保温涂料”的保温结构，可有效改善绝热材料的下沉问题。     

低输量运行管道的不稳定性分析

针对热油管道的低输量问题,着重从管道的水力特性和热力特性2个方面进行分析,评述了温度和管道摩阻损失随距离和输量变化的情况,总结出管道低输量运行会带来凝管事故、翻越点增多、发生管道超压现象和费用增加等问题,并提出了降低低输量管道不稳定性的方法及具体措施,为保证管道的安全运行提供了参考.     

基于Midas Civil的简易车桥耦合振动分析

文章以某40m预应力混凝土简支T梁为例,利用单轴车桥耦合振动数值模型及基于MidasCivil的简易车桥耦合振动模型对移动车辆荷载作用下的T梁结构动力响应情况进行计算分析。结果表明,基于MidasCivil的简易车桥耦合振动模型与数值模型的结构挠度峰值计算结果相差不大,可用于简单的车桥耦合振动分析。     

Compromising system and user interests in shelter location and evacuation planning

Traffic management during an evacuation and the decision of where to locate the shelters are of critical importance to the performance of an evacuation plan. From the evacuation management authority’s point of view, the desirable goal is to minimize the total evacuation time by computing a system optimum (SO). However, evacuees may not be willing to take long routes enforced on them by a SO solution; but they may consent to taking routes with lengths not longer than the shortest path to the nearest shelter site by more than a tolerable factor. We develop a model that optimally locates shelters and assigns evacuees to the nearest shelter sites by assigning them to shortest paths, shortest and nearest with a given degree of tolerance, so that the total evacuation time is minimized. As the travel time on a road segment is often modeled as a nonlinear function of the flow on the segment, the resulting model is a nonlinear mixed integer programming model. We develop a solution method that can handle practical size problems using second order cone programming techniques. Using our model, we investigate the importance of the number and locations of shelter sites and the trade-off between efficiency and fairness.     

Design and evaluation of an integrated inventory and transportation system

This paper proposes the adoption of an integrated inventory and transportation system (IITS) to minimize the total costs of inventory and transportation. A non-linear programing is developed by analyzing transportation and inventory costs with one supplier and many retailers in the distribution environment. The paper compares the proposed model with the traditional approach in computing total costs with numerical data. The results indicate that the total costs can be optimized by adopting integrated programing rather than the traditional approach, along with achieving improved customer service levels. In particular, sensitivity analysis is applied to determine the performance of the IITS under various transportation costs, holding costs and shortage costs. It shows that the transportation cost per unit is most sensitive in the proposed model. In this situation, the IITS is more effective for cost saving when set-up cost, holding and shortage costs are high, but is less effective for situations involving high per-unit transportation costs.     

寒区隧道拱墙铺设防水保温层施工方法

拉法山隧道工程采用拱墙铺设双层防水板中间加保温板的防水保温设计方法,为解决如何采用无钉法依次铺设“防水层+保温层+防水层”的问题,在施工现场先后试验了胶结法、吊绳吊挂法、环向钢筋固定法和防水板连接带环向张拉连接法4种铺设方法。在可行性和实用性等方面对这4种方法进行综合分析比较后,总结出防水板连接带环向张拉连接法最经济、环保,并且符合设计要求和便于现场操作。     

新型外墙保温材料“玻化微珠”的应用和施工技术

随着国家经济发展方式的改变,在建筑领域,建筑节能新材料不断推出并逐步取代高成本、高耗能、高污染的建筑材料。膨胀玻化微珠无机干粉砂浆体系就是一种应用于建筑工程外墙的新型建筑节能环保保温材料。该文介绍了该材料在江西联泰.香域尚城项目的外墙内侧的使用所见。用实践表明,通过加强施工技术和质量管理,可以保证施工质量,有利于缩短工期,取得了很好的经济效益。"玻化微珠"保温材料确是一种应用区域广泛,值得推广应用的新型保温材料。     

石安高速公路现场热再生沥青混合料的设计与施工

以石(家庄)-安(阳)高速公路改建工程为例,介绍了现场热再生沥青混合料的组成设计方法与施工质量控制方法,为现场热再生技术在内蒙古自治区的应用提供一定的参考。     

Vertical random vibration analysis of vehicle–track coupled system using Green's function method

A vertical vehicle–track coupled dynamic model, consisting of a high-speed train on a continuously supported rail, is established in the frequency-domain. The solution is obtained efficiently by use of the Green's function method, which can determine the vibration response over a wide range of frequency without any limitations due to modal truncation. Moreover, real track irregularity spectra can be used conveniently as input. The effect of the flexibility of both track and car body on the entire vehicle–track coupled dynamic response is investigated. A multi-body model of a vehicle with either rigid or flexible car body is defined running on three kinds of track: a rigid rail, a track stiffness model and a Timoshenko beam model. The results show that neglecting the track flexibility leads to an overestimation of both the contact force and the whole vehicle vibration response. The car body flexibility affects the ride quality of the vehicle and the coupling through the track and can be significant in certain frequency ranges. Finally, the effect of railpad and ballast stiffness on the vehicle–track coupled vibration is analysed, indicating that the stiffness of the railpad has an influence on the system in a higher frequency range than the ballast.     

Influence of polygonal wear of railway wheels on the wheel set axle stress

The coupled vehicle/track dynamic model with the flexible wheel set was developed to investigate the effects of polygonal wear on the dynamic stresses of the wheel set axle. In the model, the railway vehicle was modelled by the rigid multibody dynamics. The wheel set was established by the finite element method to analyse the high-frequency oscillation and dynamic stress of wheel set axle induced by the polygonal wear based on the modal stress recovery method. The slab track model was taken into account in which the rail was described by the Timoshenko beam and the three-dimensional solid finite element was employed to establish the concrete slab. Furthermore, the modal superposition method was adopted to calculate the dynamic response of the track. The wheel/rail normal forces and the tangent forces were, respectively, determined by the Hertz nonlinear contact theory and the Shen–Hedrick–Elkins model. Using the coupled vehicle/track dynamic model, the dynamic stresses of wheel set axle with consideration of the ideal polygonal wear and measured polygonal wear were investigated. The results show that the amplitude of wheel/rail normal forces and the dynamic stress of wheel set axle increase as the vehicle speeds rise. Moreover, the impact loads induced by the polygonal wear could excite the resonance of wheel set axle. In the resonance region, the amplitude of the dynamic stress for the wheel set axle would increase considerably comparing with the normal conditions.