轨道交通车辆抗侧滚结构形式的选型分析

介绍了抗侧滚刚度对轨道交通车辆性能的影响。通过对车辆的控制方式、抵抗侧风能力、动力学性能和柔度系数4个方面的分析研究来确定轨道交通车辆的抗侧滚结构形式,为车辆抗侧滚结构形式的选择提供了理论依据。研究表明:当车辆采用两点控制时必须设置抗侧滚扭杆来提高车辆的抗侧滚能力;当车辆采用四点控制时可考虑增大空气弹簧的跨距和设置抗侧滚扭杆来提高车辆的抗侧滚能力。     

JC型弹性旁承体安装时侧翼橡胶层应力分析

对目前货车转向架装用的JC型双作用弹性旁承体进行了非线性有限元计算,分析了旁承体两侧翼橡胶层在安装及工作时的应力,给出了JC型双作用弹性旁承体在安装时的相关建议。     

轴向组合式小径向/轴向刚度比橡胶球铰结构介绍

以一种地铁车辆用转臂定位节点为例,介绍了一种轴向组合式橡胶-金属球铰结构,此种结构的特点是径向/轴向刚度比小,橡胶预压缩简单可靠,刚度调节范围广,疲劳可靠性好.     

轨道交通U型梁桥下部结构纵向水平线刚度合理值研究

针对轨道交通U型梁桥的具体结构形式,建立了桥上无缝线路梁轨相互作用空间非线性有限元计算模型。分析了轨道交通U型梁桥的无缝线路纵向附加力,并对轨道交通U型梁桥下部结构纵向水平线刚度合理值进行探讨。研究结果表明,我国《地铁设计规范》及《京沪高速铁路设计暂行规定》等规定的桥墩墩顶最小纵向水平线刚度值应用于轨道交通高架桥设计明显偏大,可适当放宽。     

牵引变压器连接刚度对车体与设备振动影响分析

建立了高速综合检测列车牵引变压器及其冷却单元与车体间的刚柔耦合力学模型,研究了利用模态叠加原理计算车体和附属设备耦合系统振动加速度的计算方法。利用数值仿真方法分析了牵引变压器和冷却单元与车体间的连接刚度对车体和设备振动的影响。     

重庆单轨车辆用SYS450D型空气弹簧研制

介绍了重庆单轨车辆用空气弹簧的技术要求及结构特点,根据技术要求进行了结构设计,通过有限元计算确定了胶囊及橡胶堆工艺制造的关键参数,进行了承载力、垂向刚度、横向刚度、最大横向变形能力、最大外径、疲劳耐久性、耐压强度、耐环境性能等型式试验,并随后装车进行了线路动力学试验。试验结果表明,研制的空气弹簧满足技术要求,达到了替代原型空气弹簧的目的。     

基于挠度理论的自锚式悬索桥受力特性分析

基于挠度理论,分析了矢跨比、边中跨比、加劲梁竖向抗弯刚度、加劲梁纵坡和整体升降温对两塔三跨自锚式悬索桥结构受力特性的影响。此外,还讨论了加劲梁在轴向压力作用下的稳定性及其极限跨径。分析结果表明：矢跨比越小,主缆拉力越大、加劲梁的轴向压力也越大,而结构的整体刚度越低;边中跨比越大,结构的整体刚度越低,加劲梁在轴向压力作用下的横向稳定性也越差;主缆抗拉刚度或者加劲梁的竖向抗弯刚度越大,结构的整体刚度越大;加劲梁纵坡和整体升降温对结构受力的影响通常较小,可以忽略不计;自锚式悬索桥的极限跨径由加劲梁的横向第一类失稳及其屈服强度共同控制。     

一种确定高圆簧横向刚度的有效方法

文中将高圆簧简化为等截面弹性直杆，导出高圆簧横向刚度计算式，并用试验结果进行修正，提出高圆横向刚度分析方法。理论分析和试验结果表明：高圆簧横向刚度的大小取愉于高圆簧的自由高度和工作高度，即由其结构几何参数和工作载荷决定。按文中方法确定的高圆簧横向刚度理论值与试验结果间的最大误差不超过１０％，满足工程理论分析要求。     

Centrifuge modelling of pipe-soil interaction in clay with crust layer

Seabed in regions, such as the Gulf of Guinea and North West Shelf of Australia, may exhibit a crust layer where the undrained shear strength can be an order of magnitude higher than that of the immediately underlying sediment. This can complicate design of steel catenary risers, where fatigue depends on the cyclic vertical stiffness of the pipe-soil interaction. Potential punch-through of the riser into the underlying soft soil may invalidate design assumptions based on the pipe-soil stiffness within the crust layer. The long-term evolution of pipe-soil stiffness within the crust layer, which exhibits similar properties to an over-consolidated soil, is also poorly understood. This paper describes centrifuge model tests undertaken in a clay sample with a crust layer, simulating the punch-through process of a pipe under load control and investigating the pipe-soil stiffness during long-term cyclic loading tests under displacement control. Results confirm that the potential for punching-through the crust layer depends strongly on the relative ratio of pipe diameter to crust layer thickness. The long-term evolution of pipe-soil stiffness showed a steady increase after an initial remoulding stage in contractile soils (normally consolidated and lightly over-consolidated), but a steady reduction in the heavily over-consolidated, more dilatant, crust. The magnitude of pipe-soil stiffness changes (during both remoulding and reconsolidation) is governed by the over-consolidation ratio of the soil and the amplitude of the cyclic displacements. This study provides insights on the relevant cyclic stiffness to consider when assessing SCR fatigue life in over-consolidated soils and soils exhibiting a superficial crust layer.     

A study on the stability of a motorcycle wheel–swingarm suspension with chain transmission

The present study describes a possible driving mechanism for a self-excited oscillation observed in motorcycle dynamics, often referred to as chatter. This phenomenon, affecting the performance of road racing motorcycles, has been simulated in straight running braking manoeuvres with multibody motorcycle models. It involves rear suspension bounce and driveline oscillation in the frequency range between 17 and 22?Hz. A simplified model of a motorcycle rear suspension with chain transmission is proposed and its stability in equilibrium configurations is studied via eigenvalue analysis. The sensitivity with respect to all its governing parameters is analysed by means of stability maps and the self-excitation mechanism is explained with the aid of energy balance analysis and phase diagrams. It is found that the key role for the instability onset is played by the gradient of the nonlinear characteristic slip function of the tyre.