A new model for temporal–spatial stochastic analysis of vehicle–track coupled systems

The vehicle–track coupled system has a random nature in the time–space domain. This paper proposes a computational model to analyse the temporal–spatial stochastic vibrations of vehicle–track systems, where the vehicle–track system is divided into a vehicle subsystem, track subsystem, and interfacial subsystem between the wheel and rail. In this model, the time-varying randomicity of dynamical parameters of the vehicle system, correlation, and randomness of the track structural parameters in the time–space joint dimensions, and randomness of the track random irregularities are considered. A probability dimension-reduction method was used to randomly combine different random variables. Furthermore, the probability density evolution method was applied to solve the delivery problem of probabilities between excitation inputs and response outputs. The temporal–spatial stochastic vibrations of the vehicle–track system with different coefficients of variation were studied, in which we assumed that the dynamic parameters obeyed the normal distribution, and the stochastic simulation method of the track random irregularities is probed into. The calculated results from this model are consistent with the actual measured results and physical conceptions. Thus, the temporal–spatial stochastic evolutionary mechanism can be explored, and the limits of dynamic indices can be formulated by using this developed model.     

Singular perturbation composite control of a free-floating flexible dual-arm space robot

The Free-floating Flexible Dual-arm Space Robot is a highly nonlinear and coupled dynamics system. In this paper, the dynamic model is derived of a Free-floating Flexible Dual-arm Space Robot holding a rigid payload. Furthermore, according to the singular perturbation method, the system is separated into a slow subsystem representing rigid body motion of the robot and a fast subsystem representing the flexible link dynamics. For the slow subsystem, based on the second method of Lyapunov, using simple quantitative bounds on the model uncertainties, a robust tracking controller design is used during the trajectory tracking phase. The optimal control method is designed in the fast subsystem to guarantee the exponential stability. With the combination of the two above, the system can track the expected trajectory accurately, even though with uncertainty in model parameters, and its flexible vibration gets suppressed, too. Finally, some simulation tests have been conducted to verify the effectiveness of the proposed methods.     

油底壳有限元模态分析及实验验证

以EQ491型发动机油底壳为研究对象,通过有限元法得到了油底壳模型的固有频率和振型,运用模态实验技术,验证了有限元模型的合理性。在原始有限元模型的基础上,对油底壳模型进行约束模态分析,验证了油底壳结构的合理性,即油底壳固有频率远大于发动机机体激振频率。     

公路隧道下穿饮用水水池的爆破控制

本项目是新建隧道下穿原有饮用水水池,因直线距离较小、且水池安全要求较高,无法使用传统爆破开挖,为保证水池正常使用,施工时严格控制同一段雷管起爆装药量,使爆破振动速度降低到安全范围内,并对爆破震动速度进行监测,确保在水池附近的振动处于可控。     

高速公路直线路段突起路标间隔设置方法

基于驾驶人的视觉惰性、视觉警示频率和感觉特性,分析了突起路标的视觉警示作用,确定了突起路标的闪现频率,计算与修正了突起路标的初始间隔。应用ADAMS/Car仿真软件模块,建立了道路、车辆和突起路标模型,将车型设置为大型车和小型车,大型车的车速设置为60、80、100km·h-1,小型车的车速设置为80、100、120km·h-1,大型车和小型车的方向盘转角均设置为1°、3°、5°。分别对提出的12m间隔与现行规范推荐的15m间隔各进行243次仿真,分析振动警示效果。仿真结果表明:在12m间隔下,平均碾压率为93.1%,小型车和大型车对应的平均警示率分别为41.7%和5.6%;在15m间隔下,平均碾压率为93.7%,小型车和大型车对应的平均警示率分别为33.3%和28.9%;12、15m间隔对小型车都具有较好的振动警示效果,15m间隔对大型车的振动警示效果更好。当高速公路夜间交通流较大或需要加大交通设施的夜间安全效果时,可选12m间隔提供良好的视觉连续性和视觉警示效果;考虑施工维护的方便性和经济性或者大型车比例较大时,可选择15m间隔。     

某内燃机车司机室声固耦合噪声仿真分析

建立某内燃机车的白车身声固耦合有限元模型,对司机室的结构模态、空腔的声学模态以及声固耦合模态进行了分析计算,并在柴油机安装梁处施加单位激励载荷,对司机室前200 Hz的振动及声场响应进行计算分析.针对声场响应的仿真计算结果对声压的峰值产生的原因进行了详细的分析.结果表明:在91、119、131、143、170、198 Hz处由于司机室壁板共振产生了明显的声压峰值,在116、131、143以及164Hz处由于声固耦合使得声压级骤增,需要在实际操作中对该频域加以控制.     

冰区航行船舶电力推进轴系机电耦合的扭振分析

通过螺旋桨桨叶与冰块的相互作用过程,建立单冰块对螺旋桨扭转振动的激励函数;同时建立机电耦合振动数学模型,推导得到机电耦联动力学方程,研究电机电磁激励力对扭转振动的影响。以3500吨科考船电力推进轴系为研究对象,基于冰载荷激励力和电磁激励力对轴系扭转振动进行分析,为复杂的船舶电力推进轴系在冰区航行时的振动研究奠定了基础。     

船用低速柴油机曲轴轴向振动研究

以船用大功率低速柴油机柔性体曲轴为对象,在考虑气体力、运动部件惯性力、扭纵耦合效应等因素的情况下,建立曲轴、连杆、活塞的刚柔混合动力学模型。通过数值仿真,分别对连杆推力、连杆法向力和切向力对曲轴轴向振动的影响进行分析。分析结果表明：法向力是曲轴轴向振动的直接激励源,切向力是曲轴轴向振动的间接激励源-切向力引起曲轴扭振,进而引起曲轴纵振;同时法向力和切向力对曲轴轴向振动的影响非常相近;而连杆推力(法向力和切向力合力)引起的曲轴轴向振动是扭纵耦合振动的结果,并非两种分力作用结果的简单叠加。     

响应谱法与时程法在管道水锤分析中的对比研究

水锤是输流管道中经常发生的现象,由于阀门操作不当或设备突然停车引起的水锤极易引起管道的振动,造成设备及支架的破坏,严重影响管道系统的正常运行。文章运用CAESAERⅡ软件,对管道中的水锤现象分别采用响应谱法和时程分析法进行分析。结果表明:响应谱法有利于对振动响应过大模态的精确控制,时程法能精确求解时间历程内各时刻系统的整体响应。为全面分析水锤对管道应力的影响提供了一个研究思路。     

环向加肋对充液圆柱壳振动特性的影响分析

文章研究了环向加肋对充液圆柱壳耦合振动的影响。基于Love壳体理论,考虑壳体内部完全充液,采用波动法建立充液环肋圆柱壳耦合振动的频率特征方程,得到了不同边界条件下的耦合频率值。通过与已有文献数据对比,验证了文中研究方法的有效性和正确性。最后通过算例,分析了环肋参数对充液圆柱壳结构耦合振动的影响。结果表明,肋骨尺寸、数目的增加,对充液圆柱壳振动频率的提升影响明显,而内、外加肋形式所产生的影响则相对有限;肋骨对频率的影响主要表现在周向波数较大时;肋骨高度变化对耦合振动频率的影响更明显。