WG-21A无绝缘轨道电路传输特性的改进

介绍了WG-21A无绝缘轨道电路的计算方法，并针对工程应用中存在的问题提出了改进措施并得出了结论。     

实测数据量大小对疲劳强度评估结果影响的研究

提速机车和客车的运用特点是全寿命时间长、运行线路条件相对固定。如何经济、有效地对结构疲劳强度进行评估是很重要的工作。首先介绍了疲劳强度评估的方法;其次,按不同的里程从全程数据中抽取数据并计算等效应力幅;最后通过对比分析,得出实测数据量大小对疲劳强度评估结果的影响程度,提出了经济、有效的采样方案。     

基于TCP/IP拥塞控制的算法研究

在WPAN上使用TCP的关键在于拥塞控制，根据TCP的拥塞控制机制，通过分析拥塞控制的闭环控制原理、TCP／IP拥塞控制所使用的典型技术，研究TCP／IP拥塞控制在无线网上应用的算法。     

基于经验模式分解的钢轨波浪弯曲不平顺提取方法

钢轨波浪弯曲不平顺隐藏在轨道不平顺中。采用小波分析和经验模式分解相结合的方法,对钢轨波浪弯曲不平顺进行识别和提取分析。利用对称双正交小波对轨检车监测到的车体垂向加速度响应和高低轨道不平顺信号进行小波变换,滤除波长1 m以下成分后,基本可以保证用经验模式分解得到的第1个固有模态函数包含全部钢轨弯曲不平顺信息。对提取得到的钢轨波浪弯曲不平顺的分析表明,不同钢轨上存在的弯曲不平顺不同,钢轨存在的波浪弯曲不平顺是波长在3 m附近变化的准周期不平顺;钢轨波浪弯曲不平顺是引起车体颤振的原因。建议在提速线路和客运专线上应限制波浪弯曲钢轨上道。     

加强领导落实责任认真做好青藏铁路建设用地管理工作

铁路建设用地验收交接的技术性、专业性、政策性较强,涉及面广。青藏铁路公司建设管理部采取“结合实际、突出重点、全面指导、整体推进”的做法,加强与地方政府土地管理部门的联系,参加建设用地的征用和施工用地的管理工作;主动与建设单位沟通,共商建设用地管理的对策;统一竣工资料的标准,保证竣工资料的齐全、规范;牢固树立为运输生产服务的理念,依法、规范、科学地管理铁路建设用地,保证建设用地交接完整、准确、规范地进行。     

Japanese perspective of driver information systems

A perspective view of of Japanese R&D activities of Driver Information Systems is given from the standpoint of developing joint projects by public and private sectors. First, a brief history of the R&D activities is illustrated from above mentioned standpoint. Then, two major projects, AMTICS and RACS, and the social backgrounds of these projects are explained. In order to give a clear idea of both projects some technical details are treated.Based on the history and the present status of the developments, the basic design conceptions of Japanese Driver Information Systems are explained and several factors or reasons which have influenced to the design conception are discussed. Then, the promoting systems of the R&D activities are generally explained and present status of the projects and future problems in developing more advanced systems are also handled. A brief discussion on the establishment of international standard is also mentioned as a final comment.     

Using longitudinal methods for analysis of a short-term transportation demonstration project

This paper documents an application of panel, or longitudinal data collection in the evaluation of a TSM (Transportation Systems Management) demonstration project. The project was a four-week demonstration of staggered work hours in downtown Honolulu during February–March 1988. The 4 wave panel survey elicited commuting experiences of approximately 2,000 downtown employees at two week intervals before and during the project. The sample involved both employees who participated in the project by shifting their work hours, and those who did not. The panel survey was augmented by floating-car observations of travel times on major routes into downtown Honolulu on the same four dates.The purpose of the analysis was to determine whether employee commute times were affected, and if so, how these changes were distributed among various employee segments. Two methods were used. First, travel time changes were estimated using paired t-tests. Second, regression equations were used to estimate project time savings as a function of trip length, route, and location of residence. Results show that travel time savings due to the project were typically small, less than ten percent. Nonparticipants experienced greater savings than participants, and some segments of participants experienced longer travel times during the project. The panel method proved to be an effective way to measure project travel time impacts and shows that the method is appropriate in short time applications.Presented at the Annual Meeting of Transportation Research Board, January 7–11. 1990, Washington, D.C.     

铁路客运专线相关技术研究

铁路客运专线技术新,标准高,工程庞大,系统复杂。经研究和论证,提出客运专线建设总体技术路线,分析了铁路客运专线在速度目标值、线路平纵段面、路基工程、桥梁工程、隧道工程、轨道工程、站场等方面的主要技术特点,并围绕无砟轨道和高速道岔设计理论等方面的关键技术开展研究。通过采用CFG桩、预应力管桩等设计和工程措施,控制路基沉降,建立路基沉降变形精测系统网,定期观测与评估。对桥梁基础沉降与梁的徐变,采取基础沉降控制、预应力混凝土梁徐变变形控制和区域沉降地区的桥梁沉降控制等措施。隧道施工采用台阶法、交叉中隔壁法和双侧壁导坑法,衬砌采用复合式衬砌或整体式衬砌。     

电控静液压传动推耙机的结构特点和维护要点

以卡特D5G电控静液压推耙机为例,介绍静液压传动技术在履带式工程机械行走驱动系统中的应用,阐述系统的结构特点及维护要点.