京沪线南翔牵引变电所有源无源混合补偿方案

介绍了采用低压侧两相式有源与无源混合补偿方案，可以有效降低补偿装置的补偿容量，减小补偿装置的体积，并将该方案实际应用于工程实践，仿真结果验证了补偿方案的正确性与有效性，该装置已投入运行，为新补偿方案在国内推广应用奠定了基础。     

重载铁路牵引供电方案与接触网载流能力的分析

针对重载铁路以及交流传动机车的特点,对新建重载铁路牵引供电方案与接触网载流能力的关系进行了细致的分析,逐步深入的介绍了重载铁路牵引供电方案设计的几个关键步骤,以及详细的计算方法,并提出了设计中应注意的问题。     

HXD2型大功率交流传动货运电力机车牵引电传动系统

介绍HXD2型大功率交流传动货运电力机车牵引电传动系统的电气原理、技术参数、性能特点和结构组成,对牵引电传动系统的各关键部件和装置组成进行了详细的功能描述。     

准高速电力机车牵引齿轮优化设计

在对国内外机车牵引齿轮现状进行深入调查的基础上，提出了从优选材料及热处理工艺、进行齿形和参数优化设计、合理选择制造精度与工艺，优选润滑剂与润滑密度方式，改善动力学性能等五个方面提高我国准高速电力机车牵引齿轮动承载寿命的具体措施，其中在齿形和参数优化方面，设计了优选 角并能使齿根危险断面齿厚尽可能大，而应主 磨前滚刀，优选出能使啮合过程中最大闪温值为最小的变位系数，并在此了考虑机车启动、持续与高速运     

牵引电机外锥传动转轴机械加工工艺优化

文章分析牵引电机转轴采用传统多机床加工工艺存在的不足,详细介绍改进工艺手段和工艺方法、优化工艺参数等,极大地提高了转轴的加工质量和生产效率。     

牵引模式对C0-C0架悬式机车粘着性能的影响

分析了牵引模式对C0-C0架悬式机车粘着性能的影响.通过对牵引装置不同布置方式进行比较,指出机车的轴重转移量以车体中央截面成对称分布,对应轮对上的粘着质量利用率之和为定值;并提出牵引点高度对机车粘着性能影响较大,而牵引装置布置方式对其影响较小,机车设计时需根据悬挂特性选择合适的牵引点高度.     

HD469单级减速驱动中桥总成失效分析

汽车实际运行中零件失效的表现往往较复杂,给失效分析工作带来很大的困难。本文结合HD469单级减速驱动中桥的失效,通过对拆开的桥的各个零件,尤其是出现异常零件的观察,运用系统推理分析思想,发现安装在差壳周圈上12.9级六角头螺栓掉头断裂是导致整个469单级桥总成发生严重失效的根本原因。     

增大截面法在加固双曲拱桥中的应用

文章利用有限元计算软件建模计算、分析某双曲拱桥的受力情况,介绍采用增大截面的方法加固桥梁病害部位,计算分析加固、提载后的桥梁受力情况,并判断加固效果。     

Dynamics of railway wagons subjected to braking torques on defective tracks

It is well known that track defects cause profound effects to the dynamics of railway wagons; normally such problems are examined for cases of wagons running at a constant speed. Brake/traction torques affect the speed profile due to the wheel–rail contact characteristics but most of the wagon–track interaction models do not explicitly consider them in simulation. The authors have recently published a model for the dynamics of wagons subject to braking/traction torques on a perfect track by explicitly considering the pitch degree of freedom for wheelsets. The model is extended for cases of lateral and vertical track geometry defects and worn railhead and wheel profiles. This paper presents the results of the analyses carried out using the model extended to the dynamics of wagons containing less ideal wheel profiles running on tracks with geometry defects and worn rails.     

A novel fuzzy logic correctional algorithm for traction control systems on uneven low-friction road conditions

The traction control system (TCS) might prevent excessive skid of the driving wheels so as to enhance the driving performance and direction stability of the vehicle. But if driven on an uneven low-friction road, the vehicle body often vibrates severely due to the drastic fluctuations of driving wheels, and then the vehicle comfort might be reduced greatly. The vibrations could be hardly removed with traditional drive-slip control logic of the TCS. In this paper, a novel fuzzy logic controller has been brought forward, in which the vibration signals of the driving wheels are adopted as new controlled variables, and then the engine torque and the active brake pressure might be coordinately re-adjusted besides the basic logic of a traditional TCS. In the proposed controller, an adjustable engine torque and pressure compensation loop are adopted to constrain the drastic vehicle vibration. Thus, the wheel driving slips and the vibration degrees might be adjusted synchronously and effectively. The simulation results and the real vehicle tests validated that the proposed algorithm is effective and adaptable for a complicated uneven low-friction road.