缓和竖曲线的反演设计研究

应用已有的车辆简化模型,借助反演设计理论,研究了缓和竖曲线的反演设计方法;探讨了依据车辆—路面耦合动力学模型的安全性和舒适性动力学评价指标,给出了缓和竖曲线反演设计的一般流程。该方法为开发宜人化路面CAD系统提供了理论依据。     

具有模块化结构的汽车动力学仿真模型的初步研究

初步探讨了面向开发型驾驶模拟器的具有模块化结构的汽车动力学仿真模型建立方法，从而可以在此基础上进一步建立一套通用的面向结构的汽车动力学仿真程序，便捷地在开发型驾驶模拟器上实现对不同类型或同类型不同结构车辆性能的仿真。     

傅立叶变换在柴油机瞬态转速计算中的应用研究

介绍了一种计算瞬态转速的方法,原理是通过对曲轴转速波动信号进行傅立叶变换,在频谱中获取缺齿出现的频率,以此来换算出转速。在YC6112ZLQ柴油机上进行了实机试验,计算值与实测值比较的结果表明,此方法计算发动机瞬态转速准确而有效。     

路段动态特征中的交通组成因素研究

基于对交通流建模过程中将车型单一考虑为标准小汽车,忽略了现实交通量中车型的不同构成,本文通过对不同车型的动力特性进行标定,将其特性反映在跟车模型与车道变换模型中,并且利用交通仿真技术,分析了交通量构成对路段行程时间、车速、延误等动态特性指标的影响。     

车辆振动瞬态分析及动荷载

以装有平衡悬架和全悬浮驾驶室的三轴载重车为研究对象,建立受多点位移激励的多自由度车辆振动模型。采用数值模拟方法生成路面的随机激励时域函数,对车辆振动系统进行瞬态分析,求得车辆动荷载的最大瞬时值并与采用功率谱分析得到的结果进行比较。     

工程车辆FOPS冲击试验中落锤塑性变形研究

为了对工程车辆的落物保护装置(FOPS)进行可靠性试验提供理论依据,采用冲击动力学的塑性波两侧的动量平衡理论对工程车辆FOPS受冲击时落锤的动态响应进行了研究,建立了锤头变形的基本方程,绘制了方程相应曲线;建立了锤头在冲击过程中任一瞬时变形长度和非变形长度的数学模型,找到了工程应变和冲击速度之间的曲线对于塑性大变形的突变点及影响落锤变形的各个因素和控制变形的依据。为减小落锤的蘑菇形尺寸,降低锤头的材料成本,多次重复使用落锤,进行合理的落锤结构设计指明了方向。     

降雨作用下高填土质路堤边坡的渗流稳定分析

针对现行的高填土质路堤边坡,基于饱和—非饱和渗流数学模型,设计了二维非稳定渗流程序,通过模拟因雨水入渗引起的暂态渗流场,分析土体中含水量、基质吸力的变化规律;采用等效粘聚力的概念,利用延伸的MOHR COULOMB破坏准则对路堤边坡进行了弹塑性有限元分析,进而得出路堤边坡在不同降雨时刻的安全系数;最后分析了降雨重现期、土参数φb和由路堤施工所引起的土体渗水性系数的各向异性对边坡渗流稳定的影响。     

三轴汽车前后轮角输入时的响应特性

本文详细推导了三轴汽车线性二自由度模型的运动微分方程，分析了汽车对前后轮角输入时的移居记响应特性。从汽车动力学的角度讨论了前后轮转应具备的比例关系。该方法同样适用于其它多轴汽车的建模分析。     

Wheel-rail contact models for vehicle system dynamics including multi-point contact

Advanced modelling of rail vehicle dynamics requires realistic solutions of contact problems for wheels and rails that are able to describe contact singularities, encountered for wheels and rails. The basic singularities demonstrate themselves as double and multiple contact patches. The solutions of the contact problems have to be known practically in each step of the numerical integration of the differential equations of the model. The existing fast, approximate methods of solution to achieve this goal have been outlined. One way to do this is to replace a multi-point contact by a set of ellipses. The other methods are based on so-called virtual penetration. They allow calculating the non-elliptical, multiple contact patches and creep forces online, during integration of the model. This allows nearly real-time simulations. The methods are valid and applicable for so-called quasi-Hertzian cases, when the contact conditions do not deviate much from the assumptions of the Hertz theory. It is believed that it is worthwhile to use them in other cases too.     

Fuzzy-logic applied to yaw moment control for vehicle stability

In this paper, we propose a new yaw moment control based on fuzzy logic to improve vehicle handling and stability. The advantages of fuzzy methods are their simplicity and their good performance in controlling non-linear systems. The developed controller generates the suitable yaw moment which is obtained from the difference of the brake forces between the front wheels so that the vehicle follows the target values of the yaw rate and the sideslip angle. The simulation results show the effectiveness of the proposed control method when the vehicle is subjected to different cornering steering manoeuvres such as change line and J-turn under different driving conditions (dry road and snow-covered).