大跨桥梁油罐车燃烧火灾模型计算方法研究

桥梁上油罐车燃烧可分为油罐车火灾和燃油泄漏油池火灾2种,为了建立2种定量分析的火灾模型,基于火灾学原理,采用理论分析与FDS数值模拟相结合的方法,提出了考虑危化品种类、桥面风、油罐车尺寸等因素的油罐车火灾最大热释放速率定量计算方法;建立了燃烧油池最大直径、扩散时间以及直径扩大速度的求解方程,提出了可表征不同泄漏孔径下油池扩散、燃烧动态过程的数学模型,并通过前人的试验结果对模型的正确性进行了验证。通过对依托工程的分析,结果表明:油罐车火灾时,最大热释放速率与桥面风速正相关,但增长幅度逐渐减小,风速从4.96 m·s^-1增至10.84 m·s^-1时,最大热释放速率的变化范围为62.89~113.54 MW,随风速增加至10.84 m·s^-1,燃烧时间逐渐变短,缩短至原来的57%,火焰高度逐渐降低,趋近于9.5 m(含油罐车高度);火焰核心区域随风速增大而增大,且向下风向倾斜。泄漏油池燃烧时,泄漏孔径的变化对热释放速率和油池扩散时间影响较小;泄漏速率比接近于泄漏孔半径的平方比,油池最大直径比、扩大速度比与泄漏孔半径比相当,燃烧时间随泄漏孔半径的增大而减小,减小速度变缓;随着燃烧油池直径增大,火焰高度增加,火焰核心区域增大;当扩散至最大直径时,其火焰的水平影响区域比油罐车燃烧更广,但燃烧时间更短。     

双后桥平衡悬架骑马螺栓的布置分析

分析了双后桥车型底盘平衡悬架板簧连接骑马螺栓竖直布置与内八斜拉布置2种布置形式对平衡悬架系统的性能的影响,并通过CAE软件完成了相应骑马螺栓的受力及变形分析。通过分析可知,骑马螺栓内八字斜拉布置应力分布优于竖直布置结构,该布置可增加板簧的有效作用长度。     

Carbon and energy footprints of electric delivery trucks: A hybrid multi-regional input-output life cycle assessment

Due to frequent stop-and-go operation and long idling periods when driving in congested urban areas, the electrification of commercial delivery trucks has become an interesting topic nationwide. In this study, environmental impacts of various alternative delivery trucks including battery electric, diesel, diesel-electric hybrid, and compressed natural gas trucks are analyzed. A novel life cycle assessment method, an environmentally-extended multi-region input-output analysis, is utilized to calculate energy and carbon footprints throughout the supply chain of alternative delivery trucks. The uncertainties due to fuel consumption or other key parameter variations in real life, data ranges are taken into consideration using a Monte Carlo simulation. Furthermore, variations in regional electricity mix greenhouse gas emission are also considered to present a region-specific assessment for each vehicle type. According to the analysis results, although the battery electric delivery trucks have zero tailpipe emission, electric trucks are not expected to have lower environmental impacts compared to other alternatives. On average, the electric trucks have slightly more greenhouse emissions and energy consumption than those of other trucks. The regional analysis also indicates that the percentage of cleaner power sources in the electricity mix plays an important role in the life cycle greenhouse gas emission impacts of electric trucks.     

Dynamic stability of forklift trucks in cornering situations: parametrical analysis using a driving simulator

This paper describes the examination of the vehicle dynamics and stability of four-wheeled forklift trucks (FLTs) in cornering situations. Cornering at excessive speed is one major reason for fatal accidents with forklifts caused by lateral tipover. In order to increase the lateral stability of this kind of working machinery, the influence of certain important design properties has been studied using an appropriate vehicle simulation model and a driving simulator. The simulation model is based on a multi-body system approach and includes submodels for the propulsion system and the tyres. The driving behaviour of the operator has not been modelled. Instead, a driving simulator has been built up and a real human driver was employed for ensuring adequate and realistic model input. As there have not been any suitable standardised test manoeuvres available for FLTs, a new driving test has been developed to assess the lateral stability. This test resembles the well-known J turn/Fishhook turn, but includes a more dynamic counter-steering action. Furthermore, the dimensions of the test track are defined. Therefore, the test is better adapted to the driving dynamics of forklifts and reflects the real driver behaviour more closely. Finally, a parametrical study has been performed, examining the influence of certain important technical properties of the truck such as the maximum speed, the position of centre of gravity, rear axle design features and tyre properties. The results of this study may lead to a better understanding of the vehicle dynamics of forklifts and facilitate goal-oriented design improvements.     

液压组合挂车转向机构换位孔的可制造化处理

根据任意轴线下液压模块式组合挂车转向系统的优化设计原理,通过合并法、分开法、综合法三种孔位处理方法,实现了对优化后的换位孔的可制造化处理,取得了满意的效果。     

自卸汽车液压系统故障2例

针对实际工作中出现的2例自卸汽车液压系统的故障,介绍了一种可以根据经验和借助适当的检测工具,对相关零部件进行从简单到复杂的逐一排查方法,以及使故障得以快速排除的分析思路。     

基于LMS．AMESim的泵送系统液压元件建模与仿真试验

基于液压仿真软件LMS．AMESim，建立泵送液压回路仿真模型；全面了解泵送过程中的泵送压力、油液流量、换向冲击力等关键参数，得到相关的仿真结果，并与试验数据作对比。实践证明，该研究方法对于泵送液压回路系统的设计、分析与优化具有重要的借鉴作用。     

Tyre-force estimation by Kalman inverse filtering: applications to off-highway mining trucks

Kalman inverse filtering is used to develop a methodology for real-time estimation of forces acting at the interface between tyre and road on large off-highway mining trucks. The system model formulated is capable of estimating the three components of tyre-force at each wheel of the truck using a practical set of measurements and inputs. Good tracking is obtained by the estimated tyre-forces when compared with those simulated by an ADAMS virtual-truck model. A sensitivity analysis determines the susceptibility of the tyre-force estimates to uncertainties in the truck’s parameters.     

基于运用载荷应力频度分布评估转向架构架焊缝疲劳寿命的方法

针对转向架构架焊缝边缘部位,运用以往有损伤实例的车辆的运行试验,获得实际作用应力频度分布.同时,采用新假定的S-N曲线及传统的疲劳设计曲线,进行了上述部位的强度及寿命评价,指出这种方法能获得较稳定的寿命评价结果.     

重型载货汽车气压制动系统危险状态识别

针对重型载货汽车因气压制动系统发生管路破裂、机械故障或热衰退导致制动效能下降且不易察觉从而引发严重交通事故的问题，提出基于主成分分析降维（PCA降维）和马尔可夫模型的气压制动系统危险状态识别方法。考虑到三轴载货汽车双回路制动系统的结构复杂性以及制动过程制动踏板动作、系统压力建立和实现车辆减速具有明显的时序性特点，首先采用PCA降维的方法对系统状态进行辨识；然后运用驾驶人制动意图与制动系统响应的双层隐形马尔可夫模型对系统状态进行识别。受驾驶人习惯影响制动踏板作用瞬间辨识度低，采用混合高斯聚类法提取不同制动意图时制动保持阶段数据建立制动意图识别模型和系统响应识别模型，通过二者匹配程度判定系统状态。最后，分别依据实车试验数据对模型进行离线训练和在线辨识验证。试验结果表明：系统正常状态下，基于PCA降维和马尔可夫模型相结合的识别方法能够准确、有效地识别制动系统状态；制动管路断开压力降低状态下，PCA降维方法能够及时有效识别其危险状态。