柴油机HCCI燃烧的均质混合气制备

介绍了均质充量压缩着火燃烧的概念、优缺点及其良好的发展前途与当前面临的困难。分析了HCCI混合气制备的重要性，总结了柴油机HCCI混合气制备的典型方法和成功经验，并分析了混合气制备对HCCI燃烧排放、着火相位的控制以及功率输出的影响，探讨并展望了HCCI混合气制备的可能发展方向。     

我国清洁汽车的发展及对策

简述了我国清洁汽车的发展概况和存在的主要问题,重点提出我国清洁汽车“应加快燃油汽车先进排放控制技术的研发与应用;代用燃料汽车的发展重点应继续放在单一燃料燃气汽车上;混合动力汽车应加快发展,但自主开发应谨慎”等对策及建议。     

康明斯6BT柴油机窜气问题的研究

介绍了窜气对柴油机性能的不利影响,通过活塞环密封系统的动力学分析,阐述发动机窜气产生的内在机理,并给出了计算发动机窜气量的公式。     

摩托车尾气净化金属载体催化剂涂覆的研究

在950℃下高温氧化5 h,箔片表面生成板状Al2O3晶须,有利于增强涂层与箔片的附着力。在载体表面涂覆一层MgAl2O4/Al2O3过渡涂层,有助于提高活性组分与金属载体的结合力,可以获得高结合强度的涂层结构,促使活性元素高度分散。     

CNG/柴油双燃料车用发动机排放特性研究

通过用YZA102Q柴油机改装的CNG／柴油双燃料发动机进行燃用双燃料和纯柴油两种情况下的对比试验。对CNG／柴油双燃料发动机THC、CO、NOx和烟度的排放特性，以及空燃比、引燃油量、喷油提前角对双燃料发动机排放的影响进行了研究和分析。     

胶焊,点焊和胶接接头应力分布的比较分析

采用三维弹塑性有限元数值分析方法，比较了分析了胶焊，点焊和胶接接头的应力分布情况，结果表明，胶焊接头与胶接接头的应力分布特征值基本相同，仅在焊点区内略有区别，胶焊接头中的胶粘剂有效地降低了点焊接头中焊点的应力，消除了其焊点过级处的应力集中，所得应力分布可合理解释已有强度试验结果。     

激光焊接技术在载货车驾驶室顶盖柔性制造中的应用研究

将激光焊接技术应用在载货车驾驶室试制中的柔性制造，利用进口的三维五轴CO2激光加工机成功地完成了大型三维驾驶室顶盖激光对接焊，试制的顶盖完全达到产品图纸要求。研制了顶盖激光切割、焊接专用夹具，并针对车身常用裸板和镀锌钢板进行了工艺试验。     

Greenhouse gas emissions from ships in ports – Case studies in four continents

Emissions of GHG from the transport sector and how to reduce them are major challenges for policy makers. The purpose of this paper is to analyse the level of greenhouse gas (GHG) emissions from ships while in port based on annual data from Port of Gothenburg, Port of Long Beach, Port of Osaka and Sydney Ports. Port call statistics including IMO number, ship name, berth number and time spent at berth for each ship call, were provided by each participating port. The IMO numbers were used to match each port call to ship specifications from the IHS database Sea-web. All data were analysed with a model developed by the IVL Swedish Environmental Research Institute for the purpose of quantifying GHG emissions (as CO₂-equivalent) from ships in the port area. Emissions from five operational modes are summed in order to account for ship operations in the different traffic areas. The model estimates total GHG emissions of 150,000, 240,000, 97,000, and 95,000 tonnes CO₂ equivalents per year for Gothenburg, Long Beach, Osaka, and Sydney, respectively. Four important emission-reduction measures are discussed: reduced speed in fairway channels, on-shore power supply, reduced turnaround time at berth and alternative fuels. It is argued that the potential to reduce emissions in a port area depends on how often a ship revisits a port: there it in general is easier to implement measures for high-frequent liners. Ships that call 10 times or less contribute significantly to emissions in all ports.     

轨道客车不锈钢车体电化学钝化工艺研究

文章通过显微组织、显微硬度、电化学性能表征测试,分析了不锈钢车体焊缝及热影响区的组织变化及性能差异,研究了钝化道次、移动速度等电化学钝化工艺参数对焊接接头及热影响区耐蚀性的影响规律.试验结果表明:焊接热影响区显微组织发生明显改变,显微硬度下降,表面耐蚀性明显下降,当以10 mm/s单道次钝化作业时,点蚀电位最高,耐蚀性最好,30天盐雾试验后,钝化处理表面未发现明显锈蚀.该工艺已在公司进行了推广应用,效果良好.     

Planning hierarchical urban transit systems for reductions in greenhouse gas emissions

Public transit systems with high occupancy can reduce greenhouse gas (GHG) emissions relative to low-occupancy transportation modes, but current transit systems have not been designed to reduce environmental impacts. This motivates the study of the benefits of design and operational approaches for reducing the environmental impacts of transit systems. For example, transit agencies may replace level-of-service (LOS) by vehicle miles traveled (VMT) as a criterion in evaluating design and operational changes. In previous work, we explored the unintended consequences of lowering transit LOS on emissions in a single-technology transit system. Herein, we extend the analysis to account for a more realistic case: a transit system with a hierarchical structure (trunk and feeder lines) providing service to a city where demand is elastic. By considering the interactions between the trunk and the feeder systems, we provide a quantitative basis for designing and operating integrated urban transit systems that can reduce GHG emissions and societal costs. We find that highly elastic transit demand may cancel emission reduction potentials resulting from lowering LOS, due to demand shifts to lower occupancy vehicles. However, for mass transit modes, these potentials are still significant. Transit networks with buses, bus rapid transit or light rail as trunk modes should be designed and operated near the cost-optimal point when the demand is highly elastic, while this is not required for metro. We find that the potential for unintended consequences increases with the size of the city. Our results are robust to uncertainties in the costs and emissions parameters.