荧光磁粉探伤自动检测及图像处理系统研究

荧光磁粉检测中操作人员的安全保护、检测效率、检测结果的保存、复验等一直以来都是磁粉检测的技术瓶颈。研究一种自动磁粉探伤图像采集处理系统,能够对缺陷图像进行采集、预处理和缺陷标注,利用该系统可以有效减轻工人的劳动强度,提高检测结果的可靠性,保证缺陷记录和处理的可追溯性。     

Connectivity analysis of the global shipping network by eigenvalue decomposition

ABSTRACT

Maritime shipping necessitates flexible and cost-effective port access worldwide through the global shipping network. This paper presents an efficient method to identify major port communities, and analyses the network connectivity of the global shipping network based on community structure. The global shipping network is represented by a signless Laplacian matrix which can be decomposed to generate its eigenvectors and corresponding eigenvalues. The largest gaps between the eigenvalues were then used to determine the optimal number of communities within the network. The eigenvalue decomposition method offers the advantage of detecting port communities without relying on a priori assumption about the number of communities and the size of each community. By applying this method to a dataset collected from seven world leading liner shipping companies, we found that the ports are clustered into three communities in the global container shipping network, which is consistent with the major container trade routes. The sparse linkages between port communities indicate where access is relatively poor.     

Contents Index Volume 35 and 36

Active safety systems would benefit from tyre force and friction potential information. Different sensor concepts, including, among others, the EU–funded Apollo–project developed tyre sensor based on optical position detection, are being studied. The sensor can measure tyre carcass deflections with respect to the rim. The carcass deflections can be used to calculate tyre forces and they may be exploited in the estimation of friction potential. The waveforms of the sensor signal are illustrated. The vertical and lateral force estimations are presented with unavoidable compensation parts. The tyre sensor measurements were compared to the measurement–vehicle results and good correlations achieved. Continuing activities are concerned with the estimation of friction potential and the detection of aquaplaning.     

Heavy duty vehicle rollover detection and active roll control

This paper presents the results of a comprehensive study on heavy-duty vehicle (HDV) roll stability improvement technology. The proposed rollover threat warning system uses the real-time dynamic model-based time-to-rollover (TTR) metric as a basis for online rollover detections. Its feasibility for implementation in a HDV rollover threat detection system is demonstrated through vehicle dynamic simulation studies. The research on the development of a rollover threat detection system is further enhanced in combination with an active roll control system using active suspension mechanism to improve heavy-duty trucks’ roll stability both in the static cornering and in emergency maneuvers. It has been demonstrated that the roll stability of typical heavy-duty trucks has been largely improved by the proposed active safety monitoring and control system.     

Fault-tolerant control of heavy-haul trains

The fault-tolerant control (FTC) of heavy-haul trains is discussed on the basis of the speed regulation proposed in previous works. The fault modes of trains are assumed and the corresponding fault detection and isolation (FDI) are studied. The FDI of sensor faults is based on a geometric approach for residual generators. The FDI of a braking system is based on the observation of the steady-state speed. From the difference of the steady-state speeds between the fault system and the faultless system, one can get fault information. Simulation tests were conducted on the suitability of the FDIs and the redesigned speed regulators. It is shown that the proposed FTC does not explicitly worsen the performance of the speed regulator in the case of a faultless system, while it obviously improves the performance of the speed regulator in the case of a faulty system.     

SiCp／Al复合材料中增强体SiC含量的测定方法研究

在利用内耗法和超声衰减法研究SiCp/Al复合材料阻尼性能的基础上，分析SiCp/Al复合材料超声衰减系数中吸收系数与散射系数之间的关系，提出一种用超声法测定SiCp/Al复合材料增强体SiC含量的方法。与传统的测试方法相比，它具有简便、快捷的优点。     

基于风险的船体结构无损检测功能的分级

基于船舶结构传统的经验基础上的检测方法不但带来较高的费用,而且还会产生不必要的检测.针对上述问题,本文提出了基于风险的船舶结构无损检测功能分级方法,采用检测概率、错误识别概率和裂纹出现概率度量检测功能,并修正了错误识别概率的取值范围.根据风险值对无损检测功能进行了分级,研究了风险值随检测概率、错误识别概率和裂纹出现概率的变化规律,并分析了风险值对检测费用、维修费用及失效费用的敏感性.在此基础上,将基于风险的船舶结构无损检测功能分级方法应用于优化检测策略,并用算例证明了文中所提方法的有效性.     

一种准确检测直线同步电机动子位置的方法

论述了利用长定子同步电机的齿槽检测信号与线性插值法结合来提高直线同步电机动子位置检测精度的方法。分析了这种方法的误差,给出了实现线性插值的2种算法、实现的方案、仿真与实验结果。     

基于双T滤波器的城市轨道交通列车电缆绝缘检测方法研究

城市轨道列车车载电缆是其整个电力系统中传输和分配电能以及传输信号控制信息的重要设备,电缆的绝缘状态对列车安全可靠运行有重要影响。传统绝缘检测装置都未考虑到电磁干扰对绝缘检测的影响,列车运行环境中严重的电磁干扰易造成绝缘在线监测系统数据的波动大及工作不稳定的问题,为此提出基于双T滤波器的列车电缆绝缘检测新方法。此方法不仅可以提高电缆绝缘检测精度,而且还可以适应列车复杂噪声信号干扰环境,保证设备稳定运行。     

列车纵向冲击的检测与分析

针对列车纵向冲击问题,提出了信号采集与处理方案,设计了一套随车采集和分析系统。文中介绍了系统组成、工作原理及运行过程,初步建立了纵向冲击与旅客乘坐舒适度之间的数学模型,并运用该模型进行了实际演算,取得了预期的效果。