影响水泥混凝土路面施工质量的因素

影响水泥路面施工质量的因素很多 ,从基层、路面的原材料 ,施工技术方面进行了剖析 ,并进行了总结。     

边坡地下水动力作用及排导措施研究现状

详细分析了目前边坡地下水的研究情况,认为边坡地下水动力作用的研究包括两方面的内容,一是地下水资源的定量评价和人工补给的预测,二是岩体的裂隙水压对变形和破坏的影响。地下水动力作用的研究方法可概括为数学模拟法、数值模拟法和实验模拟法。并对目前边坡地下水的排导措施进行了归纳,主要分为地表防渗措施和地下排导措施两类。     

水面舰艇规避自导鱼雷的建模计算与分析

通过对水面舰艇规避来袭自导鱼雷过程的分析,建立了水面舰艇规避鱼雷的战术基础模型,对水面舰艇规避来袭自导鱼雷效果进行了建模计算,给出了水面舰艇防御鱼雷的组织方法,对研究水面舰艇规避鱼雷战术具有一定的参考价值.     

战术激光武器在水面舰艇反导中的应用研究

分析现代战争中水面舰艇反导的现状,从水面舰艇反导系统的需求出发,结合战术激光武器的研制情况以及国外用于水面舰艇反导的研究,分析研究舰载战术激光反导武器系统的反应时间等水面舰艇反导的重要参数;论证了舰载战术激光反导武器的可行性,最后概要阐述系统的组成和作战流程。     

Calculation of hydrodynamics for semi-submersibles based on NURBS

Accurate hydrodynamic calculations for semi-submersibles are critical to support modern rapid exploration and extraction of ocean resources. In order to speed hydrodynamic calculations, lines modeling structures were separated into structural parts and then fitted to Non-uniform Rational B-spline （NURBS）. In this way, the bow and stern section lines were generated. Modeling of the intersections of the parts was then done with the universal modeling tool MSC.Patran. Mesh was gererated on the model in order to obtain points of intersection on the joints, and then these points were fitted to NURBS. Next, the patch representation method was adopted to generate the meshes of wetted surfaces and interior free surfaces. Velocity potentials on the surfaces were calculated separately, on basis of which the irregular frequency effect was dealt with in the calculation of hydrodynamic coefficients. Finally, the motion response of the semi-submersible was calculated, and in order to improve calculations of vertical motion, a damping term was affixed in the vertical direction. The results show that the above methods can generate fine mesh accurately representing the wetted surface of a semi-submersible and thus improve the accuracy of hydrodynamic calculations.     

北京铁路地下直径线盾构选型

研究目的:通过对盾构选型的研究,为类型工程的盾构选型提供参考,掌握盾构选型的关键技术。研究方法:分析了北京铁路地下直径线的工程地质及水文地质;针对不同类型盾构的结构特点,进行了可行性分析和论证;通过对盾构类型与地层渗透性的关系、与粘土含量的关系、与颗粒级配的关系的分析,从开挖面稳定机理、地表沉降、装机功率、刀具磨损、施工成本、施工进度等方面对盾构选型进行了详细阐述和方案比较。研究结果:通过对不同类型盾构的分析,完成了适应于北京铁路地下直径线工程的盾构选型,并对盾构施工的关键技术进行了探讨。研究结论:通过对工程地质及水文地质的分析,得知北京铁路地下直径线工程最适合使用泥水盾构施工。     

铸造复合化技术与铸铁接合技术的动向

介绍了铸造复合化技术的发展新动向,着重阐述了压力浇注法、离心铸造法等新技术、新工艺;同时还叙述了铸铁接合技术的新进展;指出铸造复合化技术将对多功能铸件和复合化铸件的推广应用作出贡献。     

水面舰艇空调通风系统技术现状及展望

通过对国内外水面舰艇空调通风系统设计技术现状的分析比较,提出了国内水面舰艇空调通风系统设计优化解决途径、优化设计目标和发展展望。     

码头面层混凝土表面缺陷防治

论述码头混凝土面层施工常见质量通病对工程使用和观感质量的影响,分析质量通病的成因,提出预防及治理措施。在营口港鲅鱼圈港区四期54#～56#泊位码头面层混凝土施工中,收到了较满意的效果。     

Prediction of Hydrodynamic Performance of Marine Propellers by Surface Panel Method

The potential based low order surface panel method is used to predict the hydrodynamic performance of marine propellers. In present method the hyperboloidal quadrilateral panels are employed to avoid the gap between the panels. The influencecoefficients of panels are calculated by Morino's analytical formulations for increasing numerically calculating speed.The pres-sure Kutta condition is satisfied on the trailing edge of propeller blade by Newton-Raphson iterative procedure.Therefore the