利用闲置轮胎吊改造的车载堆煤皮带机

为解决汕头港煤堆场不足的问题,提出将轮胎吊改造成堆煤皮带机,与地面移动皮带机配套,就可将备用的堆煤场利用起来。介绍了该方案的设计、设备的选型,及其稳定性计算,指出该方案实施后,将大大提高堆场边角的利用率。     

块石基床爆夯技术在重力式码头的应用及质量控制

爆夯技术近年在重力式码头抛石基床上得到广泛应用,本文结合福建某重力式码头基床、地基及水文的实际情况,总结块石基床水下爆炸夯实技术的设计、施工工艺、质量控制及爆破的安全控制,以供类似工程参考。     

全回转起重船主尺度模型研究

分析了国内全回转起重船的发展现状及发展趋势,对现有的船型数据资料进行整理分析,利用EXCEL回归分析、Matlab中BP神经网络工具与RBF神经网络工具分别建立了全回转起重船主尺度与最大起重量的关系模型,并对它们的回归分析误差进行了比较.该模型的建立有利于掌握全回转起重船主尺度要素随起重量的变化规律,对起重船方案设计以及后续的技术经济论证可起指导性作用,有助于该船型的报价设计和初步设计,并可使其总体设计得到优化.     

挖泥船产量计密度测量精度分析及放射源核素、活度选择研究

通过理论分析结合长江武汉航道工程局挖泥船施工现场情况提出以清水计数率作为密度测量精度的评价指标,在此基础上推导出针对不同排泥管径所需放射源活度的计算公式,据此结合现场条件建立放射源核素及活度的选择条件,为提高设备的有效性提供依据。     

三相逆变器供电单相永磁同步电动机的起动性能分析

本文对采用三相逆变器供电的单相永磁同步电动机变频起动过程的转矩进行了深入的分析,提出了用于单相永磁同步电动机变频起动分析的简化等值电路,分别用拟稳态法和简化等值电路法计算了单相永磁同步电动机变频起动过程中的异步起动转矩,两者计算结果相一致,证明了该简化等值电路法的正确性。根据简化等值电路法推出了变频起动时保证最大异步转矩保持恒定的完全补偿法,用拟稳态法计算了采用完全补偿法变频起动时的异步转矩和平均转矩,验证了完全补偿法的正确性。     

烟台某工程循环水取、排水工程压水试验

为确定烟台某工程地基基岩的渗透特性,阐述水上岩体压水试验的主要操作过程、试验数据处理和试验结果分析评价方法．测定区域内的各岩层的透水率和渗透系数,给出不同风化程度岩层的渗透性评价,为设计提供防渗设计所需参数。     

铁道车辆运行安全评判的轮对爬轨脱轨准则

为了掌握车辆爬轨脱轨机理及主要影响因素,分析了轮对的三维空间受力,推导了轮轨横向力和垂向力比值的一般表示式,假设车轮在达到最大轮缘接触角时为脱轨的临界状态,并认为这时轮轨间出现完全摩擦滑动,导出了不考虑轮对摇头角的临界脱轨判别的二维准则与考虑轮对摇头角和轮轨蠕滑率效应的三维脱轨判别准则,给出了轮轴脱轨系数的定义,采用轮轴脱轨系数和轮重减载率进行脱轨的判别。仿真计算结果表明:二维脱轨判别准则与三维准则相比偏于保守;摇头角越小甚至变负,越有利于防止脱轨,摇头角越大,三维准则的临界脱轨曲线越接近于二维准则的;减小轮轨摩擦系数与增大轮缘角均有利于防止脱轨的发生。     

Corrosion rate measurements in steel sheet pile walls in a marine environment

Corrosion of steel structures in the marine environment is a major problem. The deterioration of this kind of structures is costly and difficult to predict both when designing new structures and when estimating the remaining service life time for existing structures. The aim of this investigation was to find indicative values for the corrosion rate of steel sheet piles on the Swedish west coast. Such corrosion rates (mm/year) can be used both when designing new structures by oversizing the steel thickness and when estimating the bearing capacity of existing sheet pile structures. Earlier investigations on the corrosion rates along the Swedish east coast – with salinity from about 0.2% to 0.8% – are still used today as guidelines for the corrosion rate of all steel structures in the Swedish maritime environment even though the salinity on the west coast can be as high as 3.0%.Steel sheet pile wharfs located in the port of Halmstad on the Swedish west coast were inspected by ultrasonic measurements. Three wharf structures with a total length of about 700 m were inspected. None of the inspected wharfs had or have had cathodic protection. The thickness measurements of the steel sheet pile structures were performed by divers.The age of the three inspected sheet pile structures ranged from 36 to 51 years. The dimensions of the original sheet pile sections are known. One of the quay structures is located along a river. The salinity at all wharfs varied from low values at the surface to approx. 2% at the bottom (also in the river outflow).The measured average corrosion rates were in the same order as the design values in the European code. However, the results indicate increased corrosion rates about 1 m below the mean water surface and at the level of the propellers from the ships berthing the most frequented of the inspected wharfs, 3–6 m below water surface.The tolerances of steel sheet thicknesses – usually in the order of ±6% – are often neglected when investigating the remaining thickness in steel sheet piles. A simple calculation model shows that the sheet pile must be almost 50 years of age before an accurate estimation on the corrosion rate can be made, considering the tolerances, if the true original sheet pile thickness is not known.     

沥青路面运营初期平整度竣工验收标准研究

采用数理统计原理,运用SPSS软件对陕西省7条高速公路交-竣工平整度数据进行分析,得出了陕南、关中和陕北地区路面平整度衰变幅度均值分别为0.39m/km、0.28m/km和0.24m/km,这也将作为计算竣工验收推荐值的依据;再基于交-竣工平整度变化规律,建立了平整度竣工验收推荐值的计算公式:IRIju=IRIji+IRIs,可为今后平整度竣工验收标准提供有效的理论依据。     

面向移动终端的实时交通信息服务分析

为了进一步提高我国交通信息服务水平,缓解拥堵,对比研究了现有服务终端的特点,并对用户交通信息需求展开调查.结合服务终端特点及调查结果,构建了面向移动终端的实时交通信息服务系统.系统可向移动终端提供信息查询、信息发布、服务下载等功能,为用户提供出行全程的交通信息服务.