强夯法在下卧深层软基处治中的应用

结合工程实例，分析强夯法处理软弱路基机理，总结强夯法形成硬壳层在处理下卧深层软基的新思路，对类似公路的建设具有借鉴作用。     

On the equivalent wheelbase of a three-axle vehicle

The steady-state handling properties of a rigid vehicle with a tandem rear axle configuration are developed. This work uses conventions resulting in a parsimonious characterisation of steady-state handling of such three-axle vehicles that is shown to be a simple extension of the well-known two-axle bicycle model. Specifically the concepts of understeer and wheelbase are developed for a three-axle vehicle, and shown to play the same role in characterising vehicle handling as they do in the well-known two-axle vehicle model. An equivalent wheelbase of a three-axle vehicle is expressed in terms of vehicle geometry and cornering stiffness of each axle. The model developed in this work is reconciled with previous models that make use of simplifying assumptions found in the literature.     

A fundamental investigation of tilt control systems for narrow commuter vehicles

One way of addressing traffic congestion is by efficiently utilizing the existing highway infrastructure. Narrow tilting vehicles that need a reduced width lane can be part of the solution if they can be designed to be safe, stable, and easy to operate. In this paper, a control system that stabilizes the tilt mode of such a vehicle without affecting the handling of the vehicle is proposed. This control system is a combination of two different types of control schemes known as steering tilt control (STC) and direct tilt control (DTC) systems. First, different existing variations of both STC and DTC systems are considered and their shortcomings analysed. Modified control schemes are then suggested to overcome the deficiencies. Then a new method of integrating these two control schemes that guarantees smooth switchover between the controllers as a function of vehicle velocity is proposed. The performance of the proposed STC, DTC, and integrated systems is evaluated by carrying out simulations for different operating conditions and some experimental work. The design of a second-generation narrow tilting vehicle on which the developed control system has been implemented is presented.     

Design of safety-oriented control allocation strategies for overactuated electric vehicles

The new vehicle platforms for electric vehicles (EVs) that are becoming available are characterised by actuator redundancy, which makes it possible to jointly optimise different aspects of the vehicle motion. To do this, high-level control objectives are first specified and solved with appropriate control strategies. Then, the resulting virtual control action must be translated into actual actuator commands by a control allocation layer that takes care of computing the forces to be applied at the wheels. This step, in general, is quite demanding as far as computational complexity is considered. In this work, a safety-oriented approach to this problem is proposed. Specifically, a four-wheel steer EV with four in-wheel motors is considered, and the high-level motion controller is designed within a sliding mode framework with conditional integrators. For distributing the forces among the tyres, two control allocation approaches are investigated. The first, based on the extension of the cascading generalised inverse method, is computationally efficient but shows some limitations in dealing with unfeasible force values. To solve the problem, a second allocation algorithm is proposed, which relies on the linearisation of the tyre–road friction constraints. Extensive tests, carried out in the CarSim simulation environment, demonstrate the effectiveness of the proposed approach.     

Optimisation of lateral car dynamics taking into account parameter uncertainties

Simulation studies on an active all-wheel-steering car show that disturbance of vehicle parameters have high influence on lateral car dynamics. This motivates the need of robust design against such parameter uncertainties. A specific parametrisation is established combining deterministic, velocity-dependent steering control parameters with partly uncertain, velocity-independent vehicle parameters for simultaneous use in a numerical optimisation process. Model-based objectives are formulated and summarised in a multi-objective optimisation problem where especially the lateral steady-state behaviour is improved by an adaption strategy based on measurable uncertainties. The normally distributed uncertainties are generated by optimal Latin hypercube sampling and a response surface based strategy helps to cut down time consuming model evaluations which offers the possibility to use a genetic optimisation algorithm. Optimisation results are discussed in different criterion spaces and the achieved improvements confirm the validity of the proposed procedure.     

直线电机地铁车辆如何降低制动磨耗

由于直线电机车辆的固有特性及某轨道交通线路的运营特点,实施电制动时,导致空气制动被迫频繁补充,造成制动磨耗件消耗较快。介绍了改造前、后制动闸片、制动盘及制动施加情况,并进行了经济分析。通过改善空气制动施加逻辑及更换新型号的闸片,制动磨耗量明显降低,可大幅降低运营成本。     

不同雷诺数下车辆队列尾车发动机舱盖气动特性研究

数值仿真与模型风洞试验相结合研究了典型工况下两车队列中尾车发动机舱盖气动特性和两车间隔区域的流场,对比了缩比模型和实车模型对应雷诺数下车辆队列的流动形态。缩比模型仿真结果与风洞试验结果一致表明采用数值方法的可行。对比不同雷诺数下车辆队列气动特性发现,缩比模型与实车模型发动机舱盖表面平均静压分布基本相同,但在纵向对称面上,实车模型的前车尾迹比缩比模型更加上扬,底部区域气流速度更高。非定常条件下,实车模型前车尾涡相对尺度明显小于缩比模型,且扩散得更充分,尾迹区涡的分布状态更加混沌,发动机舱盖表面脉动能量的分布更加混乱。涡在两车间隔区域的运动并非简单的移动,而是一个由涡破裂、涡配对和涡融合构成的复杂过程。     

数字化汽车标准信源技术及其在公路交通管理中的应用研究

数字化汽车标准信源体系的建立是解决我国公路交通管理难题的有效方式。以800/900MHz无源RFID技术可建立起数字化汽车标准信源体系平台,通过建立该平台,可形成不停车收费及路径识别的应用系统,该系统不但可以实现不停车收费及路径识别功能,还可以进行一系列的拓展应用,提高我国公路交通的管理水平。     

Vehicle sensor data-based analysis on the driving style differences between operating indoor simulator and on-road instrumented vehicle

Abstract

Indoor simulator and on-road instrumented vehicle are the most popular ways to analyze driving behaviors by using collected Vehicle Sensor Data (VSD). However, for a same driver, the driving performance could be different in the real world and in the simulated world. Even though many studies have been conducted to discover the differences of driving behaviors in these two circumstances, little research has focused on analyzing the differences in driving style, which can provide more integrated knowledge of a driver from the natural structure, stimulus–response mechanism, of driving behaviors. Therefore, in this paper, the driving styles in both the real world and the simulated world are extracted by implementing the nonnegative matrix factorization method on the collected VSD data. Through this analysis, the driving style differences can be quantitatively described and discussed in detail. It is found that the drivers tend to be more unstable and sometimes aggressive when driving the simulator and the deviation in the perception of temporal gap in two circumstances is also discovered. The research findings are particularly valuable to calibrate the driving simulator and construct more reliable driving behavior models.     

用于智能驾驶系统评价的乘员损伤模型

只有较少的交通事故数据资源被用于建立基于碰撞速度信息的乘员损伤模型，致使所得到的模型精度差。为此，提出了基于车辆变形深度的乘员损伤模型。对美国不同制造年代和车辆级别的事故数据进行聚类分析，论证出车辆变形深度与乘员损伤风险具有相关性。以车辆变形深度为自变量，通过回归分析得到乘员损伤模型。不同种类车辆的乘员损伤模型拟合精度R²约为0.9，证明了该模型的正确性。为进一步验证，以此模型为基础，评价智能驾驶系统的有效性。以自动紧急制动系统为例，对比基于变形深度和速度变化量信息2种方法的有效性计算结果。结果表明：2组结果的平均误差不超过1%，验证了基于变形深度的乘员损伤模型的准确性。该模型仅需要事故数据库中准确的变形深度信息，能够获得更多的事故数据支持，从而可以更好地适应于不同类别智能驾驶系统的评价需求。