地铁牵引供电框架保护及功能性改造

针对广州地铁1号线不能远程区分框架保护类型和不能远程复归的状况,结合西门子S5系列PLC技术、SINAUT技术、牵引供电技术,对框架保护进行功能性改造,大大减少了框架保护故障的处理时间.改造技术方案主要通过研究数据的传递方式、协议转换、控制逻辑关系,修改组态软件、监控程序、接口程序、PLC程序的方式来实现.     

HX_D1型机车制动空气管路冲脱分析及改进方案

根据橡胶密封式管接头的作用原理和使用要求,对HXD1型机车制动空气管路冲脱故障产生的原因进行分析。从结构上对橡胶密封式管接头进行改进,并提出采用卡套式管接头代替橡胶密封式管接头的建议。     

半刚性基层沥青路面反射裂缝形成机理及防治技术分析

半刚性基层沥青路面反射裂缝的形成受多方面影响,温度裂缝是其最根本的原因,因此,防止反射裂缝应该从材料性能、结构设计、施工等多方面采取措施,从而达到最佳的效果。     

汕尾市新港大桥桥型方案比选

大跨度桥型方案比选。应在技术可行的前提下,对桥梁的经济性、美观性和创新性进行系统的分析、论证与比较,力争找到一个既能突出当地经济特色、人文思想及价值观念,又能表达现当代桥梁的技术水平及蕴涵未来桥梁的发展趋势的最佳方案。     

几种典型的大型集装箱船导轨结构特性对比计算分析

本文以固定装载型式导轨和混合装载型式导轨为研究对象,基于有限元方法分析了不同集装箱装载工况对导轨强度、刚度的影响,同时在相同集装箱装载工况下,对不同导轨的强度、刚度进行了对比分析。结果可为集装箱导轨的设计优化提供了一定的参考。     

浅海锆钛砂矿采选一体船“泰鑫1”设计研究

主要介绍了我国首艘浅海锆钛砂矿采选一体船的设计背景、主要技术参数和功能,并进一步重点论述了本船总体设计、采矿系统、选矿系统、总纵强度计算和高压岸电系统的设计思路和成果,以供今后开发类似船型的行业同仁借鉴。     

基于正交设计的船用柴油机燃烧系统参数匹配及优化

为研究柴油机燃烧系统参数匹配对柴油机动力和排放性能的影响,首先分别利用AVL_BOOST和AVL_FIRE仿真软件建立4190ZLC-2型船用柴油机整机模型和缸内燃烧高压循环模型,然后基于已建模型应用正交试验设计方法安排柴油机进气系统、喷油系统和燃烧室结构尺寸参数匹配仿真计算。研究结果表明,通过极差分析可以得出燃烧系统参数对4190ZLC-2型柴油机性能的影响主次顺序。以柴油机指示功率为评价指标时,参数组合0.26 mm-28°CA-160°-0.9-145 mm-2.6 mm-22 mm(喷孔直径-喷油提前角-油束夹角-涡流比-喉口直径-凸台高度-凹坑半径)对应的指示功率为63.40 k W,比原机仿真值高15%;以NOX排放为评价指标时,参数组合0.30 mm-24°CA-140°-0.4-135 mm-6.6 mm-14 mm(喷孔直径-喷油提前角-油束夹角-涡流比-喉口直径-凸台高度-凹坑半径)对应的NOX排放质量分数为0.015 7%,比原机仿真值低30.2%。     

钢板桩常规施工工艺及涂层受损问题

针对钢板桩施工问题,以马来西亚槟城吹填二期(STP2)工程为例,对Z型钢板沉桩机具选型及沉桩工艺进行研究。通过对比3种国外常用的钢板桩沉桩阻力估算方法及含导向架和无导向架施工的实际应用效果,优选出适合沉桩的振动锤型,并总结出两种沉桩方法的优劣性及适用情况,总结陆上钢板桩作业涂层常见受损问题及修复措施。     

Evaluation of pedestrian crosswalk level of service (LOS) in perspective of type of land-use

In India pedestrians usually cross the road at mid-block crosswalks due to ease of access to their destination or the development of adjacent land use types such as shopping, business areas, school and residential areas. The behaviour of pedestrian will change with respect to different land use type and this change in behaviour of pedestrian further reflects change in perceived level of service (LOS). So, it is important to evaluate the quality of service of such crossing facilities with respect to different land-use type under mixed traffic conditions. In this framework, pedestrian perceived LOS were collected with respect to different land-use type such as shopping, residential and business areas. The ordered probit (OP) model was developed by using NLOGIT software package, with number of vehicles encountered, road crossing difficulty as well as safety considered as primary factors along with pedestrian individual factors (gender and age), land-use type and roadway geometry. From the model results, it has been concluded that perceived safety, crossing difficulty, land-use condition, number of vehicles encountered, median width and number of lanes have significant effect on pedestrian perceived LOS at unprotected (un-signalized) mid-block crosswalks in mixed traffic scenario. The inferences of these results highlights the importance of land use planning in designing a new set of pedestrian access facilities for unprotected mid-block crosswalks under mixed traffic conditions. Also the study results would be useful for evaluating pedestrian accessibility taking into account different land-use type and planning required degree of segregation with vehicular movement at unprotected mid-block crosswalk locations.     

U型管式换热器的质量控制

U型管式换热器属于列管换热器的一种,被广泛应用在循环水冷却高温气体装置中。根据U型管式换热器的结构特点和技术原理,针对设备在使用过程中可能出现的问题,在整个材料采购和制造过程中,对换热器中管板制造加工、U型管成形及换热管与管板的焊接等制造的关键和难点予以质量控制,保证产品质量,使设备按设计要求制造完毕后安全有效地运行。