Mental models of driving and speed: biases,choices and reality

This paper provides a review of research performed by Svenson with colleagues and others work on mental models and their practical implications. Mental models describe how people perceive and think about the world including covariances and relationships between different variables, such as driving speed and time. Research on mental models has detected the time-saving bias [Svenson, O. (1970). A functional measurement approach to intuitive estimation as exemplified by estimated time savings. Journal of Experimental Psychology, 86, 204–210]. It means that drivers relatively overestimate the time that can be saved by increasing speed from an already high speed, for example, 90–130?km/h, and underestimate the time that can be saved by increasing speed from a low speed, for example, 30–45?km/h. In congruence with this finding, mean speed judgments and perceptions of mean speeds are also biased and higher speeds given too much weight and low speeds too little weight in comparison with objective reality. Replacing or adding a new speedometer in the car showing min per km eliminated or weakened the time-saving bias. Information about braking distances at different speeds did not improve overoptimistic judgments of braking capacity, but information about collision speed with an object suddenly appearing on the road did improve judgments of braking capacity. This is relevant to drivers, politicians and traffic regulators.     

对地铁信号系统列车运行速度制约因素的探讨

信号系统是保障地铁运行安全及提高运行效率的重要设备,列车超速防护功能是信号系统一个非常关键的功能。信号系统防护下的列车运行速度由车辆、线路、轨道、限界及信号系统等条件共同决定。由于相关专业对信号系统安全制动模型不了解,在实际工程中易造成"速度浪费"现象。从信号系统安全制动模型的原理出发,对车辆、线路、轨道、限界等专业对列车运行速度的制约因素进行分析,提出建议。     

Modelling,simulation and applications of longitudinal train dynamics

ABSTRACT

Significant developments in longitudinal train simulation and an overview of the approaches to train models and modelling vehicle force inputs are firstly presented. The most important modelling task, that of the wagon connection, consisting of energy absorption devices such as draft gears and buffers, draw gear stiffness, coupler slack and structural stiffness is then presented. Detailed attention is given to the modelling approaches for friction wedge damped and polymer draft gears. A significant issue in longitudinal train dynamics is the modelling and calculation of the input forces – the co-dimensional problem. The need to push traction performances higher has led to research and improvement in the accuracy of traction modelling which is discussed. A co-simulation method that combines longitudinal train simulation, locomotive traction control and locomotive vehicle dynamics is presented. The modelling of other forces, braking propulsion resistance, curve drag and grade forces are also discussed. As extensions to conventional longitudinal train dynamics, lateral forces and coupler impacts are examined in regards to interaction with wagon lateral and vertical dynamics. Various applications of longitudinal train dynamics are then presented. As an alternative to the tradition single wagon mass approach to longitudinal train dynamics, an example incorporating fully detailed wagon dynamics is presented for a crash analysis problem. Further applications of starting traction, air braking, distributed power, energy analysis and tippler operation are also presented.     

柴油机减压-排气复合缓速匹配试验研究

通过对柴油机独立减压缓速、排气缓速性能进行研究,获取了二者在循环工作过程中的作用区域和性能提升的影响因素,并以此为基础,组合二者最优方案形成了复合缓速系统,进一步分析独立缓速性能改进方法在复合缓速中的适用性,通过试验验证了改进策略的有效性。研究结果表明,复合缓速是一种有效的辅助缓速装置,合理匹配后可在柴油机运转转速范围内获得与柴油机标定功率相等的制动功率,同时柴油机排温仍然可控制在限值范围内。     

直线电机轨道交通系统的地面电阻制动仿真

通过对列车进行的牵引计算、对地面电阻制动的功率确定和地面电阻制动斩波器的设置计算机仿真分析,介绍直线电机驱动城市轨道交通列车起制动频繁,为了减少车载设备,降低列车重量,减少直线电机功率要求,以及地铁隧道内的温升,所以采用地面电阻制动。     

我国城市轨道车辆制动技术的现状与思考

较为详细地回顾了我国城市轨道车辆制动系统的发展历程,分析了目前我国新型城市轨道车辆制动系统的特点,并与我国自主研发适用于高速动车组的同类型制动系统作了技术比较。分析了我国自主研发城市轨道车辆制动系统的技术基础,指出国内技术与产品和国外相比存在着系统理念、设计经验和系统可靠性方面的差距,同时指出自主研发城市轨道车辆制动系统存在的问题,并提出了建议。     

采用直线电机牵引的广州地铁车辆

概要介绍了国内首次采用直线电机牵引的广州轨道交通4、5号线地铁车辆的主要技术特点,列车的组成和主要技术参数,并对车体、转向架、牵引与制动系统、逆变器、直线电机、辅助系统以及列车控制与制动系统作了较为详细的说明。     

车辆电磁制动方案刍议

结合机车车辆制动系统的运行情况,对电磁制动系统进行了初步探讨.提出了两种电磁制动方案:单电磁铁失电制动和双电磁铁得电制动.方案能够初步解决电磁制动系统中的一些技术难点,如减轻闸瓦间隙消除过程中闸瓦与车轮间的机械碰撞、电磁力的计算与控制、制动力的放大与传递等.     

分布式驱动电动汽车回馈制动失效的液压补偿控制

分布式驱动电动汽车各驱动轮转速和转矩可以单独精确控制,便于实现整车动力学控制和制动能量回馈,从而提升车辆的主动安全性和行驶经济性。但车辆在回馈制动过程中,一旦1台电机突发故障,其他电机产生的制动力矩将对整车形成附加横摆力矩,从而造成车辆失稳,此时虽可通过截断异侧对应电机制动力矩输出来保证行驶方向,但会使车辆制动力大幅衰减或丧失,同样不利于行车安全。为了解决此问题,提出并验证一种基于电动助力液压制动系统的制动压力补偿控制方法,力图有效保证整车制动安全性。以轮毂电机驱动汽车为例,首先建立了整车动力学模型以及轮毂电机模型,通过仿真验证了回馈制动失效的整车失稳特性以及电机转矩截断控制的不足;然后,建立了电动助力液压制动系统模型,并通过原理样机的台架试验验证了模型的准确性;接着,基于滑模控制算法设计了制动压力补偿控制器,并在单侧电机再生制动失效后的转矩截断控制基础上完成了液压制动补偿控制效果仿真验证;最后,通过实车试验证明了所提控制方法的有效性和实用性。研究结果表明：在分布式驱动电动汽车单侧电机再生制动失效工况下,通过异侧电机转矩截断控制和制动系统的液压主动补偿,能够使车辆快速恢复稳定行驶并满足制动强度需求。     

刹车状况下桥上随机车流动态演化及车-桥耦合振动分析

为实现刹车时桥上多状态车流并行动态演化的高真实度模拟和时变汽车荷载与桥梁运动状态的时时耦合,首先从宏观和微观上丰富随机车流模拟方法,宏观上沿用交通荷载调查数据中的车辆顺序、车辆基本特性等不变量,以车辆间距为服从正态分布的限幅随机变量,形成深度融合交通荷载调查数据和交通流理论的随机车流高真实度仿真方法;微观上对车辆间距随机变量确定的关键状态-阻塞状态,引入加权速度,实现阻塞密度时车流的走走停停动态描述,采用考虑驾驶人状态的概率分布方法确定车辆时距;实现多密度随机车流的高真实度仿真。其次细化刹车过程模拟,建立车流差异化刹车模型：采用顺次对比方法,筛选桥长范围最不利刹车车流;引入停车视距,考虑驾驶人反应,区分头车和跟驰车辆,精细模拟车辆刹车动态过程和刹车车流演化过程,差异化确定各车辆刹车参数;实现桥上多状态车流并行动态演化模拟。第三建立刹车力学模型,并融入至已有正常车流的车-桥耦合系统,构建可考虑刹车状态的分析系统。最后确定桥梁典型响应和分析指标,以一座大跨斜拉桥为例,对多刹车工况下的桥梁响应进行分析。结果表明：桥上刹车状况一般会产生超过正常行驶状况下的桥梁响应,最不利单车道刹车状况下的塔根弯矩甚至达到跑车工况的2.7倍,简单采用规范冲击系数方法很难实现刹车响应的包络;刹车过程中的桥梁响应最值不仅与采取刹车的车辆数目和桥上车辆保有量有关,还受刹车作用与桥梁原响应趋势的顺逆程度控制;桥梁及桥上刹停车辆的总质量和桥上正常行驶的车辆决定桥梁响应时程曲线趋势振幅;典型桥梁响应的总体趋势,与车流密度和刹车车道数相关性较小,不同时段车流会对梁端顺桥向位移和塔根弯矩产生影响。