50t手动液压压力机的设计与维修

为提高工作效率,减轻劳动强度,公司利用液压传动原理设计了一台50t手动液压压力机.介绍了液压压力机的构造工作原理和主要部件的选择.并介绍了机架构造及强度计算.最后介绍了几种常见故障及维修方法.     

沥青混合料汉堡车辙试验条件及评价指标研究

采用2种沥青、2种级配拌制4种混合料,分别在水浴和空气浴下进行50℃和60℃的汉堡车辙试验,分析了水和温度对车辙深度的影响;讨论了车辙深度和蠕变速率指标评价沥青混合料高温性能的不足,提出了车辙变形率指标.结果表明,水环境和提高温度都会加速车辙的产生,50℃水浴和60℃空气浴车辙深度的相关性好,50℃水浴汉堡车辙试验可以反映沥青混合料的抗车辙性能,建议B级沥青采用45℃,A级沥青采用50℃,改性沥青采用60℃的试验温度.     

改善轮轨接触状态的车轮型面几何设计方法

改进了车轮型面设计方法,给出了设计方法的解析数学表达式,将轮对等效锥度与轮轨型面接触状态联系起来,对设计实例进行了轮轨几何接触、非赫兹滚动接触和车辆动力学性能分析.研究结果表明:轮轨接触点能够均匀分散分布;由于接触斑面积增大约23%,最大接触压力降低约21%,使轮轨滚动接触应力降低了约20%;装备实例型面的车辆临界速度...     

测力钢轨轮轨力连续输出算法

根据轮轨相互作用特点,利用地面测试数据的信息,采用阈值判断法提取有效的轮轨力数据。设计基于径向基函数神经网络的算法,用以处理不同测试单元处的轮轨力的非线性关系,用不同车轮不同作用点位置作用下的横、垂向力训练神经网络,实现了测力钢轨轮轨力的连续测试,并对3种工况进行了仿真试验。分析结果表明：既存在干扰又存在应变片损坏时的...     

高温冷藏机组高压报警停机故障分析与排除

某船高温冷藏机组为YORK船用公司提供的2台SB042型制冷压缩机,文章结合该机组在运行中出现的机组排气压力高报警停机这一现象,通过理论分析,找出问题存在的原因,提出具体的解决方案,并在实际应用中得以验证其正确性。     

不同车轮踏面对高速轮轨关系的影响研究

根据中国高速铁路的现状,在轮对内侧距选用1353、轨底坡选用1:40、钢轨选用中国高速钢轨cHN60的前提下,研究了CRH2上使用的LMa、CRH3上使用的S1002G和日本新干线圆弧车轮JP-ARC这3种踏面对CHN60轮轨的影响.研究结果表明,LMa与CHN60的轮轨接触点分布比较均匀,有利于车轮型面的保持;其次是...     

环模自动钻床钻削进给算法

环模是饲料加工机械的核心部件,钻孔是环模加工的重要工序．根据环模加工实际经验和生产需求,为提高环模加工效率和质量,研究环模模孔加工中麻花钻头受力理论模型,给出新的环模自动钻床钻削进给算法,并根据实践结果对算法进行了优化．经实际生产检验,该算法能够有效降低钻头磨损速度,减少工人更换和打磨钻头的时间,为企业创造了经济效益．     

Adhesion estimation at the wheel–rail interface using advanced model-based filtering

The railway industry in the UK is currently expanding the use of condition monitoring of railway vehicles. These systems can be used to improve maintenance procedures or could potentially be used to monitor current vehicle running conditions without the use of cost prohibitive sensors. This paper looks at a novel method for the online detection of areas of low adhesion in the wheel/rail contact that cause significant disruption to the running of a network, particularly in the autumn season. The proposed method uses a Kalman–Bucy filter to estimate the creep forces in the wheel–rail contact area; post-processing is then applied to provide information indicative of the actual adhesion level. The algorithm uses data that, in practice, would be available from a set of modest cost inertial sensors mounted on the vehicle bogie and wheel-sets. The efficacy of the approach is demonstrated using simulation data from a nonlinear dynamic model of the vehicle and its track interface.     

Indirect method for wheel–rail force measurement and derailment evaluation

Wheel set flange derailment criteria for railway vehicles are derived and the influence of wheel–rail contact parameters is studied. An indirect method for wheel–rail force measurement based on these derailment evaluation criteria is proposed. Laboratory tests for the calibration of strain–force devices on the bearing box are carried out to determine the relationship between the applied force and the measured strain. The simulation package, SIMPACK, is used to develop a passenger car model to generate wheel–rail forces and vibration signals. Different cases are considered in this model to provide an accurate validation of the identified wheel–rail forces. A feasibility test is conducted in the Beijing Loop test line using a passenger car equipped with a set of strain gauges on the wheel set. The comparison of the force time history applied to the instrumented wheel set and that obtained using the indirect method is presented.