Adhesion estimation at the wheel–rail interface using advanced model-based filtering

The railway industry in the UK is currently expanding the use of condition monitoring of railway vehicles. These systems can be used to improve maintenance procedures or could potentially be used to monitor current vehicle running conditions without the use of cost prohibitive sensors. This paper looks at a novel method for the online detection of areas of low adhesion in the wheel/rail contact that cause significant disruption to the running of a network, particularly in the autumn season. The proposed method uses a Kalman–Bucy filter to estimate the creep forces in the wheel–rail contact area; post-processing is then applied to provide information indicative of the actual adhesion level. The algorithm uses data that, in practice, would be available from a set of modest cost inertial sensors mounted on the vehicle bogie and wheel-sets. The efficacy of the approach is demonstrated using simulation data from a nonlinear dynamic model of the vehicle and its track interface.     

Indirect method for wheel–rail force measurement and derailment evaluation

Wheel set flange derailment criteria for railway vehicles are derived and the influence of wheel–rail contact parameters is studied. An indirect method for wheel–rail force measurement based on these derailment evaluation criteria is proposed. Laboratory tests for the calibration of strain–force devices on the bearing box are carried out to determine the relationship between the applied force and the measured strain. The simulation package, SIMPACK, is used to develop a passenger car model to generate wheel–rail forces and vibration signals. Different cases are considered in this model to provide an accurate validation of the identified wheel–rail forces. A feasibility test is conducted in the Beijing Loop test line using a passenger car equipped with a set of strain gauges on the wheel set. The comparison of the force time history applied to the instrumented wheel set and that obtained using the indirect method is presented.     

Dynamic model for the wheel–rail contact friction

Accurately estimating the coefficient of friction (CoF) is essential in modelling railroad dynamics, reducing maintenance costs, and increasing safety in rail operations. The typical assumption of a constant CoF is widely used in theoretical studies; however, it has been noticed that the CoF is not constant, but rather depends on various dynamic parameters and instantaneous conditions. In this paper, we present a newly developed three-dimensional nonlinear CoF model for the dry rail condition and test the CoF variation using this model with estimated dynamic parameters. The wheel–rail is modelled as a mass–spring–damper system to simulate the basic wheel–rail dynamics. Although relatively simple, this model is considered sufficient for the purpose of this study. Simulations are performed at a train speed of 20 m/s using rail roughness as an excitation source. The model captures the CoF extremes and illustrates its nonlinear behaviour and instantaneous dependence on several structural and dynamic parameters.     

Investigation of the effects of sleeper-passing impacts on the high-speed train

The sleeper-passing impact has always been considered negligible in normal conditions, while the experimental data obtained from a High-speed train in a cold weather expressed significant sleeper-passing impacts on the axle box, bogie frame and car body. Therefore, in this study, a vertical coupled vehicle/track dynamic model was developed to investigate the sleeper-passing impacts and its effects on the dynamic performance of the high-speed train. In the model, the dynamic model of vehicle is established with 10 degrees of freedom. The track model is formulated with two rails supported on the discrete supports through the finite element method. The contact forces between the wheel and rail are estimated using the non-linear Hertz contact theory. The parametric studies are conducted to analyse effects of both the vehicle speeds and the discrete support stiffness on the sleeper-passing impacts. The results show that the sleeper-passing impacts become extremely significant with the increased support stiffness of track, especially when the frequencies of sleeper-passing impacts approach to the resonance frequencies of wheel/track system. The damping of primary suspension can effectively lower the magnitude of impacts in the resonance speed ranges, but has little effect on other speed ranges. Finally, a more comprehensively coupled vehicle/track dynamic model integrating with a flexible wheel set is developed to discuss the sleeper-passing-induced flexible vibration of wheel set.     

如何解决车辆通过曲线时车轮产生啸叫声

概述了车辆通过曲线时车轮产生啸叫声的原因,并提出了解决啸叫声的方法.     

汽车车轮加速疲劳试验的研究

以累积损伤理论为基础，对汽车车轮加速疲劳试验进行了研究，以缩短试验时间，降低试验成本。     

采用碳纤维布和WN胶加固修复金华寺特大桥病害圬工梁

结合焦柳线金华寺特大桥在运营过程中出现的结构开裂病害整治实例 ,介绍采用WN胶在梁体底部粘贴碳纤维布加固修复新工艺。     

中国古代造船业对世界的贡献与影响(连载一)

中国的独木舟出现可能与西方同期，风帆出现比埃及晚，但是一经问世，技术上先进程度却是惊人的，特别是公元前后到十五世纪，许多发明创造更是举世瞩目。这些发明和创造，不但丰富和发展了自己，而且使世界各国受益非浅，极大地促进了世界造船业发展与航海贸易进行，其贡献是辉宏的。通过以船型、水密舱壁、明轮推进、船舵与使帆技术、船体建造及其工艺、导航技术、造船理论、船舶检验与管理、水战兵器、郑和下西洋意义等十个方面进行介绍，它充分证明了中华民族有着光辉灿烂的文化，中国人民，是勤劳智慧的人民。在增加民族自豪感同时，也激励我们继往开来，与时俱进，勇往直前。     

机车轮对温差法装配过程三维弹塑性模拟

用有限元方法对机车轮对温差法装配过程进行了三维弹塑性模拟,分析了车轮与车轴中的等效应力和接触应力的分布以及轮对的塑性变形,探讨了轮毂配合间的边缘应力集中问题,对轮对过盈配合的设计具有一定的指导意义.     

浅析汽车车身无痕修复技术的重要性及方法

随着全球经济发展的不断加深,机动车的数量也不断增加,改革开放以来我国的汽车产业发展速度非常快,2018年中国机动车保有量差不多有3.27亿辆,从数字上来看汽车的量非常庞大,随之而来的是汽车售后服务的跟进,特别是随着近年来交通事故率的上升,使汽车维修业务量不断增多,其中汽车车身钣金修复是维修业务量的重要组成部分,现在很多车主对汽车的各方面性能特别是车身安全性能的重视越来越大,而采用传统的钣金修复方式越来越不被车主看好,促使新型车身钣金修复方法的不断创新,本文主要讲述汽车车身修复新型方法中的无痕修复方法,通过对比无痕修复方法和传统修复方法的优缺点来阐述无痕修复在汽车售后维修中的重要性。