水下盾构隧道管片钻穿引起的涌水突泥治理技术研究

水下盾构隧道管片钻穿会引起大量涌水突泥，对隧道建设及运营造成重大影响，且采取的隧道修复措施将影响隧道的长期运营安全。以某地铁隧道被意外钻穿的实例为工程背景，为确保水下隧道意外钻穿破坏时，可以做到临时封堵有效，永久修复满足百年使用要求，提出修复思路。在水面利用浮船进行海上袋装水泥封堵，然后筑岛截断隧道与海水的联系； 临时封堵后监测管片变形、复核隧道中线，明确钻孔对隧道限界的影响； 通过计算对结构安全性进行评价，明确钻孔对管片结构受力影响较小。在确保隧道钻穿对隧道限界及结构的影响可控后，采取地面注浆、洞内注浆、倒锥形封堵、洞内设置内撑钢板相结合的方案，对隧道钻穿处进行治理，保证隧道的安全运营。在隧道周边施工时，应加强隧道保护意识，避免对既有隧道造成破坏。     

天然气爆炸对盾构隧道的作用机制及工后修复

为了使爆炸灾害后的盾构管片得到合理的修复方案,以某地铁盾构施工过程中挖破天然气管道导致爆炸事故为背景,通过介绍爆炸的基本特性、冲击波的传播特点及火焰波的伴生关系,归纳在天然气爆炸过程中,爆炸火焰和冲击波是决定事故危害程度的2个主要因素,同时这些因素中最危险、破坏力最强、破坏区域最大的是冲击波的破坏效应。通过计算隧道内满布天然气时的TNT当量,以及采用拟静力法模拟管片内部的超压分布并计算得到管片的变形,与第三方检测数据中的管片变形指标进行耦合,证明模拟的准确性,为提出合理的区间修复方案提供依据,同时也为类似工程事故的处理和预案提供经验。     

化学注浆工艺加固高速公路路基应用实例

化学注浆工艺就是将快凝早强的水泥浆通过一定压力注入路基,挤出路基内含水,并将松散的路基材料重新凝结成整体,达到提高承载力的目的。该文根据实施实例,介绍了化学注浆工艺加固公路路基的主要步骤及取得效果,对既有道路的维修养护施工具有一定参考价值。     

An ABS control logic based on wheel force measurement

The paper presents an anti-lock braking system (ABS) control logic based on the measurement of the longitudinal forces at the hub bearings. The availability of force information allows to design a logic that does not rely on the estimation of the tyre–road friction coefficient, since it continuously tries to exploit the maximum longitudinal tyre force.

The logic is designed by means of computer simulation and then tested on a specific hardware in the loop test bench: the experimental results confirm that measured wheel force can lead to a significant improvement of the ABS performances in terms of stopping distance also in the presence of road with variable friction coefficient.     

The impact of structural flexibilities of wheelsets and rails on the hunting behaviour of a railway vehicle

The hunting motion of a passenger coach is investigated using a multibody system in which the wheelsets and the rails can be modelled as flexible bodies. By comparing the results for different model variants, in which the structural flexibilities of the wheelsets and of the rails are either taken into account or neglected, the impact of the flexibilities is analysed. It turns out that the flexibilities of both the wheelsets and the rails have a significant impact on the hunting behaviour by increasing the lateral motions of the wheelsets and lowering the critical speed. In order to investigate the impact of the flexibilities under different operating conditions, the calculations are carried out for track geometries using different rail profiles (60E1, 60E2) and different rail cants (1:40, 1:20) and for different values for the friction coefficient (0.25…0.4) at the wheel–rail contact. The results show that the influence of the flexibilities is the strongest for high lateral forces, which occur e.g. for contact geometries leading to high hunting frequencies and for high values of the friction coefficient. The results also show in some cases a strong impact of the flexibilities on the position of the wheel–rail contact on the running surface of the rail, which is of particular interest with respect to wear simulation.     

低动力作用货车转向架动力性能的研究

本文探讨低动力作用货车转向架的原理及其动力性能的计算和评估方法。首先定义9项指标,作为衡量车辆对轨道动力作用的标准。然后研究这些指标的诸因素。在此基础上总结出实现低动力作用的基本途径。本文还应用这些研究成果,提出4种低动力作用货车转向架的设计方案,并通过数值计算,同国内、外主型货车转向架对比,从而论证其在我国铁路采用的可行性。     

Tangential force variation due to the bogie direction reversal procedure

A range of tangential forces is generated within the contact patch when a wheelset moves on the rail. These forces are intensified when incorporating curved tracks and motored axle rail vehicles [Arrus, P., de Pater, A.D. and Meyers, P., 2002, The stationary motion of a one-axle vehicle along a circular curve with real rail and wheel profiles. Vehicle System Dynamics, 37(1), 29–58]. The wheelset is subject to flange contact if an unbalanced force remains in a curve towards the high rail gauge face. The resultant force in the transverse direction includes the lateral force, the radial force, and the creep forces in addition to the effect of the frequent wheelset displacement due to the kinematic oscillation [Iwnicki, S., 2003, Simulation of wheel–rail contact forces. Fatigue Fracture Engineering Material Structure, 26, 887–900]. This article has focused on a potential variation in some of the forces cited when the wheelset is subject to backward and forward movements. A severe wear rate observed within the wheel flange region in Iranian Railways was investigated by operating a test bogie on a curvaceous track. An obvious improvement in the wear rate and wear pattern of the wheels was attained when the second test bogie encountered a bogie direction reversal procedure. This enhancement is considered in this article from the force analysis standpoint.     

Influence of polygonal wear of railway wheels on the wheel set axle stress

The coupled vehicle/track dynamic model with the flexible wheel set was developed to investigate the effects of polygonal wear on the dynamic stresses of the wheel set axle. In the model, the railway vehicle was modelled by the rigid multibody dynamics. The wheel set was established by the finite element method to analyse the high-frequency oscillation and dynamic stress of wheel set axle induced by the polygonal wear based on the modal stress recovery method. The slab track model was taken into account in which the rail was described by the Timoshenko beam and the three-dimensional solid finite element was employed to establish the concrete slab. Furthermore, the modal superposition method was adopted to calculate the dynamic response of the track. The wheel/rail normal forces and the tangent forces were, respectively, determined by the Hertz nonlinear contact theory and the Shen–Hedrick–Elkins model. Using the coupled vehicle/track dynamic model, the dynamic stresses of wheel set axle with consideration of the ideal polygonal wear and measured polygonal wear were investigated. The results show that the amplitude of wheel/rail normal forces and the dynamic stress of wheel set axle increase as the vehicle speeds rise. Moreover, the impact loads induced by the polygonal wear could excite the resonance of wheel set axle. In the resonance region, the amplitude of the dynamic stress for the wheel set axle would increase considerably comparing with the normal conditions.     

斗轮式取料机行走位置精确定位

斗轮式取料机行走位置校正装置在定位中起到很重要的作用.分析了原有行走机构定位原理与状况.介绍了新定位装置的设计思路和实施方案,改革后提高了全场设备相互协同的效率和相互保护的可靠性.     

Mathematical modelling of train–turnout interaction

The paper proposes a mathematical model of train–turnout interaction in the mid-frequency range (0–500 Hz). The model accounts for the effects of rail profile variation along the track and of local variation of track flexibility. The proposed approach is able to represent the condition of one wheel being simultaneously in contact with more than one rail, allowing the accurate prediction of the effect of wheels being transferred from one rail to another when passing over the switch toe and the crossing nose. Comprehensive results of train–turnout interaction during the negotiation of the main and the branch lines are presented, including the effect of wear of wheel/rail profiles and presence of track misalignment. In the final part of the paper, comparisons are performed between the results of numerical simulations and line measurements performed on two different turnouts for urban railway lines, showing a good agreement between experimental and numerical results.