轮轨接触应力的有限元分析

利用ANSYS有限元分析软件对轮轨接触进行了弹性静力分析,模拟了轮轨真实的几何形状和边界条件,分别研究了轴重、轮径、横移量对接触应力的影响,并对各种参数的变化规律进行了分析,得出了轮轨间接触应力的分布规律。     

一种前方车辆后轮接地点检测算法

现有车辆定位算法通常通过检测车辆底部阴影来定位车辆,该算法受阴影形状大小变化的影响较大,定位精度较低。该文提出了一种通过检测前方车辆后轮接地点来精确定位车辆的方法。首先通过垂直边缘和对称性测度实现路面车辆的初定位;然后利用车辆垂直边缘和后部水平边缘显著性的特点获得后车轮可能存在的感兴趣区(ROI);最后在该ROI中通过Tamura纹理特征的粗糙度对车轮和地面进行区分,精确地得到车轮接地点位置。     

基于评价指数的属性约简算法

从粗糙集理论出发,提出可分辨关系和对象差异矩阵的概念,并以此为基础构造出基于评价指数的属性约简算法.算法采用自底向上的方法,利用属性的评价指数作为启发式信息,求得属性集合的约简.在多个UC I数据集上进行试验,理论分析和实验数据表明,文中提出的属性约简算法是有效、可行的,具有较高的效率.     

FCE发动机系统用焓轮加湿器仿真及试验研究

对一种新型的FCE发动机(燃料电池发动机)用焓轮加湿器进行了研究。设计了焓轮加湿器的数学物理仿真模型,并采用有限差分法得到了仿真模型的数值解。仿真结果与试验结果进行了对比,证明了该仿真模型结果是正确的,并且具有较高的精度。     

基于组合校正的城市轨道交通列车轮轨黏着控制方法研究

为提高城市轨道交通列车轮轨黏着力的控制,针对传统组合校正法存在的缺点,对参考速度进行延时补偿、筛选及步长限制,尽可能保证参考速度的准确性;对加速度提取采用低通加高通滤波器的方法,以降低噪声影响;黏着控制过程中,根据设定周期时间内速度差估算当前轨面黏着情况,实时调整下一周期判据阈值;根据上一调节周期触发空转时刻锁存转矩和当前加速度,以及转速差采用分段斜率的方法进行转矩调节。试验结果表明:上述控制方法转矩波动小,列车运行平稳,黏着利用率得到有效提高。     

考虑车轮谐波磨耗的动车组车轴疲劳寿命

以CRH380BL型高速动车组为研究对象,基于车轮谐波磨耗的实测结果,建立刚性轮轨、刚性轮柔性轨、柔性轮刚性轨以及柔性轮轨4种不同轮轨关系下的车辆-轨道耦合动力学模型,通过对比分析4种模型的轮轨振动特性,得到最能反映真实情况的轮轨耦合动力学模型;基于车轴受力分析,采用有限元软件ANSYS进行车轴静强度计算;采用多体动力学软件计算考虑车轮谐波磨耗的车轴载荷时间历程;根据疲劳累积损伤理论,采用FE-SAFE软件分析考虑车轮谐波磨耗的车轴疲劳寿命。结果表明:柔性轮轨关系更能反映轮轨的真实接触状态;车轴轮座内侧圆弧过渡处的应力最大,为114.4 MPa;考虑车轮谐波磨耗的车轴疲劳寿命约为19.2 a;车轮谐波磨耗导致轮轨振动加剧,对车轴疲劳寿命产生明显不利的影响。     

基于基础知识进行的转向传动轴运动布置校核

运用CATIA三维数字模型"DMU Kinematics"模块,分别对转向管柱及转向传动轴相关件进行约束,获得转向传动轴运动模型及转向传动半轴运动包络、转向传动轴当量夹角,用于验证转向传动轴与周边件间隙及其力矩波动是否符合设计要求,进而为布置设计转向传动轴十字轴位置提供理论依据。     

Establishment of Model for Tire Steady State Cornering Properties using Experimental Modal Parameters

Modeling of tire cornering properties using experimental modal parameters is studied. With tire lateral experimental modal parameters, the distribution of side force and lateral deformation under total adhesive and sliding conditions are obtained. Side force, self-aligning, cornering stiffness and relaxation length under different loads and friction coefficients are also calculated. The calculated results are in correspondence to experimental results in the references qualitatively. The non-dimensional side force obtained from the calculated results is compared with the Fiala model, its modified expression by experiments and also the widely used empirical Magic Formula model. The calculated results tally well with the fitted results obtained using Magic Formula model. It can be seen that the tire steady state cornering model using experimental modal parameters proposed in this paper is better for an in-depth study of tire natural characteristics, and the labored experimental work can be avoided.     

An investigation into the mechanism of the polygonal wear of metro train wheels and its effect on the dynamic behaviour of a wheel/rail system

This paper presents a detailed investigation conducted into the mechanism of the polygonal wear of metro train wheels through extensive experiments conducted at the sites. The purpose of the experimental investigation is to determine from where the resonant frequency that causes the polygonal wear of the metro train wheels originates. The experiments include the model tests of a vehicle and its parts and the tracks, the dynamic behaviour test of the vehicle in operation and the observation test of the polygonal wear development of the wheels. The tracks tested include the viaducts and the tunnel tracks. The structure model tests show that the average passing frequency of a polygonal wheel is approximately close to the first bending resonant frequency of the wheelset that is found by the wheelset model test and verified by the finite element analysis of the wheelset. Also, the dynamic behaviour test of the vehicle in operation indicates the main frequencies of the vertical acceleration vibration of the axle boxes, which are dominant in the vertical acceleration vibration of the axle boxes and close to the passing frequency of a polygonal wheel, which shows that the first bending resonant frequency of the wheelset is very exciting in the wheelset operation. The observation test of the polygonal wear development of the wheels indicates an increase in the rate of the polygonal wear of the wheels after their re-profiling. This paper also describes the dynamic models used for the metro vehicle coupled with the ballasted track and the slab track to analyse the effect of the polygonal wear of the wheels on the wheel/rail normal forces.     

Prediction of the interaction between a simple moving vehicle and an infinite periodically supported rail – Green's functions approach

This paper herein describes the interaction between a simple moving vehicle and an infinite periodically supported rail, in order to signalise the basic features of the vehicle/track vibration behaviour in general, and wheel/rail vibration, in particular. The rail is modelled as an infinite Timoshenko beam resting on semi-sleepers via three-directional rail pads and ballast. The time-domain analysis was performed applying Green's matrix of the track method. This method allows taking into account the nonlinearities of the wheel/rail contact and the Doppler effect. The numerical analysis is dedicated to the wheel/rail response due to two types of excitation: the steady-state interaction and rail irregularities. The study points out to certain aspects regarding the parametric resonance, the amplitude-modulated vibration due to corrugation and the Doppler effect.