Research on the Influence of Vertical Deformation of Bridge on the Track RegularityEI北大核心

Research purposes: The vertical deformation of high-speed railway (HSR) bridge will cause the track irregularity, which threatens the safe and efficient operation of the HSR. Taking the 32 m simple supported beam bridge as the research object, based on the existing mapping analytical model for bridge vertical deformation and rail geometry, the influence of the track regularity of the CRTS Ⅰ slab ballastless track structure caused by the key parameters such as the bridge vertical deformation amplitude, the hanging length of the beam end and the vertical stiffness of mortar layer were studied, and the corresponding measures to control the rail deformation were proposed, to provide theoretical reference for comprehensive treatment of rail deformation of HSR bridge. Research conclusions:(1) The pier settlement, the vertical rotation of the beam end and the beam fault will cause the rail to follow the beam deformation, and "up-warping" of the rail on the vertical deformation boundary will appear. (2) The rail deformation is directly proportional to the vertical deformation amplitude of the bridge and the key to control the rail deformation is to reduce the vertical deformation of the bridge. (3) The rail deformation can be controlled by reducing the hanging length of beam and vertical stiffness of mortar layer. (4) The research results can provide a theoretical reference for controlling the vertical rail deformation of high-speed railway bridges. © 2018, Editorial Department of Journal of Railway Engineering Society. All right reserved.     

40t轴重ZK1—G型转向架的研制

介绍了40t轴重ZK1—G型中交叉支撑单元制动铸钢三大件式转向架的主要技术特征、技术参数和结构,对其轮轴组成强度、侧架和摇枕强度及动力学性能进行了计算。线路动力学试验结果表明,该转向架的各项动力学性能均满足相关要求。     

出口马达加斯加米轨转向架的研制

介绍了出口马达加斯加米轨转向架的主要技术参数、结构特点及有关计算和试验情况.     

一种轮轨两点接触数值计算方法

根据轮轨几何约束方程的典型解得到轮轨两点接触的判断条件,运用该条件并结合迹线法给出了一种轮轨两点接触数值计算方法。     

HX_D1型机车牵引装置螺栓组应力数值模拟

对HXD1型机车牵引装置螺栓组加衬套前后的2种结构分别建立了有限元模型进行数值模拟计算,结果表明加衬套后螺栓的应力降低约一半,螺栓组利用率偏低。     

HX_D3B型交流传动电力机车通风冷却系统

简要地介绍了HXD3B型交流传动电力机车通风冷却系统的主要部件组成、结构特点、设备布置、风量分配及各通风部分的技术性能。     

轮轨接触区应力-变形状态的计算

介绍了用有限元模拟计算法评估车轮与钢轨在接触区应力-变形状态的程序和结果。     

氯盐环境下铁路混凝土配合比参数的研究

分析氯离子扩散系数作为氯盐环境下混凝土耐久性评价指标的原因及合理性。系统研究水胶比(0.33、0.38、0.45)、矿物掺和料种类(粉煤灰、磨细矿渣粉、偏高岭土、硅灰)、掺量及含气量等配合比参数对混凝土氯离子渗透性能影响规律;探讨氯盐环境下铁路混凝土配制要求;提出氯盐环境下铁路混凝土配合比参数限值。研究表明:氯盐环境下适当加入矿物掺和料是提高混凝土耐久性的关键技术措施;粉煤灰和矿渣适宜掺量分别为30%～50%、40%～60%;适当引气(含气量为4%～6%)能提高混凝土抗氯离子渗透性能;严重氯盐腐蚀环境下,应采用矿物掺和料复掺技术,且宜添加适量硅灰。     

出口澳大利亚30t轴重ZK1—K型转向架的研制

介绍了出口澳大利亚30t轴重ZK1—K型转向架的主要技术特征、技术参数和结构,并对其强度和动力学性能进行了计算与试验。结果表明,该转向架的各项指标均满足相关标准的要求。     

西安地铁2号线车辆及结构轻量化

介绍了西安地铁2号线车辆的技术参数,并对其车体钢结构及内装结构的轻量化进行了分析。