空气净化器风道的计算机仿真

在进行空气净化器风道结构的设计中,风道的结构形式对风量起着重要的影响。本文利用ICEPAK计算机仿真软件在设计阶段对空气净化器的风道进行模拟仿真,建立了风道的仿真模型及建模过程,仿真出风道进口处与出口处的空气流速的变化值,进一步研究离心风机的风量与滤层阻力、流量、流速的影响关系。通过实验比较,在不同滤器种类的情况下,验证了风阻对风量的影响大小,证明了空气净化器风道计算机仿真的正确性。     

Why is the southwest the most productive region of the East Sea/Sea of Japan?

The East Sea/Sea of Japan is a moderately productive sea that supports a wealth of living marine resources. Of the East Sea subregions, the southwest has the highest productivity. Various authors have proposed coastal upwelling, the Tsushima Current, the Changjiang Dilute Water, eddies, or discharge from the Nagdong River as potential sources of additional nutrients. In this paper, we propose, using satellite data from 1998 to 2006, that the biological productivity of the southwestern region is enhanced mainly by wind-driven upwelling along the Korean coast. Firstly, the climatology of seasonal patterns suggests that the enhanced chlorophyll a along the Korean coast is of local origin. Secondly, coastal upwelling is frequent in all seasons except winter. For example, along the coast of the Ulgi region, enhanced chlorophyll a due to coastal upwelling was observed for 25–92% of the time between Jun and Sep in the period 1998–2006. Thirdly, the advection of upwelled water through various pathways to the deeper basin was observed. Fourthly, there appeared to be a strong correlation between the interannual chlorophyll a variations of the coastal upwelling regions and the Ulleung Basin. The chlorophyll a patterns of both regions were closely related to the wind pattern in the upwelling regions, but not to that in the Ulleung Basin. Finally, changes in advection pathways also appeared to affect the productivity of the Ulleung Basin. Since 2004, there has been a shift in the pathways of upwelled water, and consequent increases in chlorophyll a in the Ulleung Basin were observed. This last observation requires further investigation.     

浅谈北方地区道路翻浆的成因及防治

结合工程实践分析了我国北方地区道路翻浆成因,并提出了多种防治措施。     

随机风浪下的游艇稳性可靠度计算

建立游艇横摇运动微分方程,利用马尔科夫过程理论和路径积分法进行求解,得到游艇横摇角概率密度函数。借鉴结构可靠性计算方法建立游艇稳性概率计算模型,采用当量正态化法(JC法)求解得到游艇稳性可靠度。实例计算表明:游艇在不同海域下的稳性可靠度存在一定差异,随着外界风浪增大,游艇稳性可靠度呈逐步下降趋势,且都存在一个快速下降的波高区间。该方法能够更科学地评判游艇在不同航行条件下的稳性状况,是游艇稳性横准研究的发展方向之一。     

南海风浪条件下Spar式浮式风机平台的构型及参数

使用WAMIT软件建立了OC3-Hywind Spar式浮式风机模型,联合FAST软件计算了浮式风机在不同工况下的幅值响应算子;结合为南海海域波浪条件优化后的JONSWAP谱,对浮式风机进行了不同工况下的响应谱分析及最大响应值计算;进一步阐述了浮式平台结构构型参数的变化对整体结构在南海相应工况下的运动影响。     

MTMD to increase fatigue life for OWT jacket structures using Powell's method

The Powell's method was developed to determine the optimal stiffness and damping of multi-tuned mass dampers (MTMD) in offshore wind turbine (OWT) support structures under fatigue loads. Numerical examples indicated that the Powell's method results are always better than those using MTMD formulations. With the exception of the blade passing (3P) frequency, it was found in this work that a positive integer (n) multiple of the 3P frequency will also result in a large wind-induced vibration, which can be excited by the frequency of the first structural vertical rotation mode and will cause significant fatigue damage. The first translation mode TMD installed at the tower top is efficient to increase fatigue life at the tower and brace connections, but it cannot reduce fatigue damage at the column and brace connections below the platform. The second translation mode TMD can reduce fatigue damage resulting from large wave loads and thus increase the fatigue life of the braces and columns. The mode-3 TMD with a reduction in the 3(3P) vertical rotation can effectively increase the fatigue life of the braces and columns. Thus, the appropriate use of these TMDs can be effective for the fatigue problem of OWT support structures.     

M型风电运维船船型设计与波浪增阻和耐波性能研究

本文基于三体风电运维船船型,结合M型船的特征要素设计改造出M型风电运维船。利用数值仿真技术模拟出M型风电运维船波浪航行时的波浪增阻与纵摇、垂荡情况,将数值仿真计算结果与原三体船的试验数据进行比较,以此探索不同M型船船型对船舶波浪航行时的波浪增阻与纵摇、垂荡情况的影响。最终确定了耐波性能较优的船型方案,从而为M型风电运维船船型设计提供了一定的参考和借鉴。     

考虑相变过程岩体孔隙率对寒区隧道温度场时空规律影响研究

为研究寒区隧道围岩在持续低温作用或冻融循环作用过程中,考虑岩体相变过程中多相体各组分变化引起的岩石热学参数差异对围岩温度场时空变化规律的影响,利用已有岩体未冻水含量研究成果,进一步推导不同孔隙率下岩体的热学参数计算公式。基于多孔介质模型建立考虑相变过程的围岩温度场计算模型,分析考虑潜热时不同孔隙率下围岩冻结缘的空间形态变化规律,及相变过程对温度场的影响。研究结果表明： 1）饱和岩体孔隙率越高,对岩体整体热学参数影响越大; 2）低温持续作用围岩时,冻结缘向围岩深处移动并不断变宽,其宽度与其深度呈线性关系; 3）饱和围岩孔隙率对冻结缘移动速度影响较大,但对其宽度基本无影响; 4）由于相变潜热,岩体在冻融循环过程中围岩温度时程曲线出现不对称阶梯状形态,且其阶梯形状宽度与围岩孔隙率呈正相关; 5）冻融循环过程中,升温及降温过程中冻结缘临近岩体温度梯度存在差异引起的传热效率不同直接导致升温、降温时程曲线的不对称性特征出现; 6）沿硐室围岩径向向外,各处围岩体的温度时程函数与加载的温度函数存在着振幅衰减和相位滞后的现象,且岩体孔隙率越高该现象越明显。     

山区高速公路弃渣体物理力学特性试验研究

公路弃土场是一种特殊的人工堆积体,对其进行稳定性分析与评价需要掌握弃渣体的物理力学指标。文章以厦蓉高速公路水都段典型弃土场弃渣体为研究对象,介绍采用现场试验和室内试验方法,对弃渣体的最大干密度和抗剪强度等参数进行研究。通过研究得到：不同颗粒成分弃渣体的最大干密度不同,但在通常推填方式下,弃渣体的强度指标基本不受压实度控制。     

三峡工程下游引航道通航水流条件试验

三峡工程枢纽泄洪产生水面波动和船闸泄水产生非恒定流,对下游引航道通航条件,尤其是对升船机的运行构成影响。泄洪在口门区及连接段产生的斜流对通航的影响很大,采用斜流的特征值并结合船模航行的斜流效应特征值,有效地分析了口门区及连接段的通航水流条件。采取修改航线措施对改善斜流影响有一定的效果。