基于Matlab/Simulink的柴油机系统模块化建模与仿真

为实现多种类型的柴油机系统快速建模仿真,利用MATLAB/Simulink,根据模块化思想,以功能为划分原则,把柴油机系统分解为一系列独立又相互联系的子系统,分别建立其模型,建立对应的具有相同模块构建规则的子模块,并建立模块库。在此基础上,可以通过调用不同的库模块,实现不同机型的仿真,并且利用模块库技术管理模块库,实现模块库的更新和扩展,动态满足多样化的仿真目的,从而提高模块的通用性,最终实现多种机型快速建模仿真。     

U形预应力工艺在整体式闸室中的应用

应用ANSYS有限元软件,建立U形预应力整体式闸室结构的三维模型,对整体式闸室结构在不同工况下的应力、变形情况进行模拟计算,计算结果表明将U形预应力工艺应用于整体式闸室结构中是可行的,可以较好地解决采用普通钢筋混凝土设计整体式闸室结构时存在的截面尺寸大、配筋量大及裂缝开展宽度不易满足的问题,从而为设计整体式闸室结构提供参考.     

耙吸挖泥船疏浚施工三维动画仿真

为促进三维动画技术在疏浚行业中的广泛应用,具体介绍了三维建模、材质贴图、灯光、特效、摄影机、动画、渲染等三维动画关键技术,并以应用广泛的耙吸挖泥船的疏浚施工三维动画制作为例,详细说明了运用这些技术进行三维动画制作的具体方法和过程。     

一种减轻装有EPS汽车转向扭矩的控制策略

本文提出了一种新的电动助力转向系统的控制策略,以减小车辆静止时改变方向所需的转向力。以前尝试通过减少不良的转向振动来减少转向扭矩失败的原因是因为高辅助增益往往会产生震荡或增加噪声敏感性。为了消除此种振动,开发出一种基于控制齿轮角速度的控制策略,它是在简化的转向模型的基础上开发出来的。这个实验获得了很好的齿轮角速度的估计值,这样就有可能消除方向盘所有旋转速度下的振动。实验证明在方向盘大转速变换下,转向扭矩显著降低,无振动传输给司机。所提出的控制策略使用一个辅助来获得超过原来的三倍以上的增益。此外,所提出的控制策略不需要补充传感器。     

Impact of phytoplankton community size on a linked global ocean optical and ecosystem model

We isolated the effect phytoplankton cell size has on varying remote sensing reflectance spectra (R_rs(λ)) in the presence of optically active constituents by using optical and radiative transfer models linked in an offline diagnostic calculation to a global biogeochemical/ecosystem/circulation model with explicit phytoplankton size classes. Two case studies were carried out, each with several scenarios to isolate the effects of chlorophyll concentration, phytoplankton cell size, and size-varying phytoplankton absorption on R_rs(λ). The goal of the study was to determine the relative contribution of phytoplankton cell size and chlorophyll to overall R_rs(λ) and to understand where a standard band ratio algorithm (OC4) may under/overestimate chlorophyll due to R_rs(λ) being significantly affected by phytoplankton size. Phytoplankton cell size was found to contribute secondarily to R_rs(λ) variability and to amplify or dampen the seasonal cycle in R_rs(λ), driven by chlorophyll. Size and chlorophyll were found to change in phase at low to mid-latitudes, but were anti-correlated or poorly correlated at high latitudes. Phytoplankton size effects increased model calculated R_rs(443) in the subtropical ocean during local spring through early fall months in both hemispheres and decreased R_rs(443) in the Northern Hemisphere high latitude regions during local summer to fall months. This study attempts to tease apart when/where variability about the OC4 relationship may be associated with cell size variability. The OC4 algorithm may underestimate [Chl] when the fraction of microplankton is elevated, which occurs in the model simulations during local spring/summer months at high latitudes in both hemispheres.     

复杂水域船舶进出港全过程仿真建模方法

本文对比分析了国内外应用各种建模方法在船舶通航研究中的优缺点,提出了一种基于多智能体信息交互的港口运营系统仿真建模方法,旨在拟实反映复杂水域船舶进出港的全过程。结合多智能体系统仿真理论、离散事件仿真理论与多元数据统计分析方法,实现了对复杂水域船舶进出港全年全过程的精细化仿真,并系统总结了可通过建模解决的关键研究问题。     

A new logit‐artificial neural network ensemble for mode choice modeling: a case study for border transport

Logit model is one of the statistical techniques commonly used for mode choice modeling, while artificial neural network (ANN) is a very popular type of artificial intelligence technique used for mode choice modeling. Ensemble learning has evolved to be very effective approach to enhance the performance for many applications through integration of different models. In spite of this advantage, the use of ANN‐based ensembles in mode choice modeling is under explored. The focus of this study is to investigate the use of aforementioned techniques for different number of transportation modes and predictor variables. This study proposes a logit‐ANN ensemble for mode choice modeling and investigates its efficiency in different situations. Travel between Khobar‐Dammam metropolitan area of Saudi Arabia and Kingdom of Bahrain is selected for mode choice modeling. The travel on this route can be performed mainly by air travel or private vehicle through King Fahd causeway. The results show that the proposed ensemble gives consistently better accuracies than single models for multinomial choice problems irrespective of number of input variables. Copyright © 2015 John Wiley & Sons, Ltd.     

A nested recursive logit model for route choice analysis

We propose a route choice model that relaxes the independence from irrelevant alternatives property of the logit model by allowing scale parameters to be link specific. Similar to the recursive logit (RL) model proposed by Fosgerau et al. (2013), the choice of path is modeled as a sequence of link choices and the model does not require any sampling of choice sets. Furthermore, the model can be consistently estimated and efficiently used for prediction.A key challenge lies in the computation of the value functions, i.e. the expected maximum utility from any position in the network to a destination. The value functions are the solution to a system of non-linear equations. We propose an iterative method with dynamic accuracy that allows to efficiently solve these systems.We report estimation results and a cross-validation study for a real network. The results show that the NRL model yields sensible parameter estimates and the fit is significantly better than the RL model. Moreover, the NRL model outperforms the RL model in terms of prediction.     

The relationship between land use and automobile travel utility: A Multiple Indicators Multiple Causes approach

The relationship between land use and the utility of automobile travel is examined by refining the utility concept, particularly by combining the microeconomic utility theory, which is concerned with the disutility of travel, and the perspective on the positive utility. A conceptual model is accordingly developed and then adjusted considering different purposes of travel. The purpose-specific models are tested through a Multiple Indicators Multiple Causes approach in Seoul, Korea, using datasets from a sample survey and geographic information systems. The major finding is that land use affects the utility mainly by changing synergy and affective utility rather than instrumental utility, which encompasses disutility variables. Among land use variables, the utility is found to be the most sensitive to the number of transit facilities for commuting and shopping travel and land use balance for leisure travel.