Integrated vehicle and powertrain optimization for passenger vehicles with vehicle-infrastructure communication

This research proposes an optimal controller to improve fuel efficiency for a vehicle equipped with automatic transmission traveling on rolling terrain without the presence of a close preceding vehicle. Vehicle acceleration and transmission gear position are optimized simultaneously to achieve a better fuel efficiency. This research leverages the emerging Connected Vehicle technology and utilizes present and future information—such as real-time dynamic speed limit, vehicle speed, location and road topography—as optimization input. The optimal control is obtained using the Relaxed Pontryagin’s Minimum Principle. The benefit of the proposed optimal controller is significant compared to the regular cruise control and other eco-drive systems. It varies with the hill length, grade, and the number of available gear positions. It ranges from an increased fuel saving of 18–28% for vehicles with four-speed transmission and 25–45% for vehicles with six-speed transmission. The computational time for the optimization is 1.0–2.1 s for the four-speed vehicle and 1.8–3.9 s for the six-speed vehicle, given a 50 s optimization time horizon and 0.1 s time step. The proposed controller can potentially be used in real-time.     

The impact of land-use mix on residents' travel energy consumption: New evidence from Beijing

Policies that encourage mixed land use are widely believed to make transport more energy efficient. However, few studies have directly examined the impacts of land-use heterogeneity on travel energy consumption at the individual level. Moreover, the definition and measures of land-use heterogeneity are debated. This paper aims to fill these gaps using the large city of Beijing, China, as a case study. Three types of land use are examined in terms of their effects on individual residents’ travel energy consumption. The results suggest that high land-use diversity and a good jobs-housing balance significantly reduces commuting travel. Interestingly, highly heterogeneous retail and housing areas may have high travel energy use, as residents are more likely to go shopping. There are obvious spatial variations in these effects. Residents of suburban ‘newtowns’, where the jobs-housing balance is particularly good, consume less travel energy. The results suggest that decreased use of conventional planning patterns, such as the socialist danwei system, and increasing urban sprawl, bring new challenges to achieving transport efficiency. Mixed land-use policies can be an effective solution to these challenges.     

Modelling,simulation and applications of longitudinal train dynamics

ABSTRACT

Significant developments in longitudinal train simulation and an overview of the approaches to train models and modelling vehicle force inputs are firstly presented. The most important modelling task, that of the wagon connection, consisting of energy absorption devices such as draft gears and buffers, draw gear stiffness, coupler slack and structural stiffness is then presented. Detailed attention is given to the modelling approaches for friction wedge damped and polymer draft gears. A significant issue in longitudinal train dynamics is the modelling and calculation of the input forces – the co-dimensional problem. The need to push traction performances higher has led to research and improvement in the accuracy of traction modelling which is discussed. A co-simulation method that combines longitudinal train simulation, locomotive traction control and locomotive vehicle dynamics is presented. The modelling of other forces, braking propulsion resistance, curve drag and grade forces are also discussed. As extensions to conventional longitudinal train dynamics, lateral forces and coupler impacts are examined in regards to interaction with wagon lateral and vertical dynamics. Various applications of longitudinal train dynamics are then presented. As an alternative to the tradition single wagon mass approach to longitudinal train dynamics, an example incorporating fully detailed wagon dynamics is presented for a crash analysis problem. Further applications of starting traction, air braking, distributed power, energy analysis and tippler operation are also presented.     

柴油发动机掺烧生物柴油的经济性研究

为了更好地评价柴油机燃用生物柴油的经济性,分析了生物柴油和0#石化柴油的理化性质,分别对生物柴油的体积分数为0.2,0.5,1的B20、B50、B100 3种燃料和0#柴油在495Q3柴油机上进行了试验。试验结果显示燃用3种燃料的燃油消耗率比0#柴油在中小负荷时平均增加5.30%,9.65%,19.04%,大负荷时平均增加2.86%,4.75%,9.64%;能量等值折合油耗率在中小负荷时平均增加2.65%,2.63%,5.74%,大负荷时平均降低0.26%,1.97%,4.80%。     

区域道路运输相对效率截面分析

随着区域路网的完善,其承载的道路运输业也呈现快速发展态势。在区域层面上,实现两者的良性互动,需要因地制宜,实现区域与运输业阶段性的协调决策,进而保证在全社会范围内对优化资源配置。这些分析的实现需要合适的评价方法对道路运输业投入要素与产出要素间的内在关系进行深入研究,并能对投入、产出要素进行量化控制。本文引入数据包络分析方法（Data Envelopment Analyses,简称DEA方法）,采用CCR模型（Charnes,Cooper and Rhodes Model）以各区域道路运输为决策单元;构筑各区域道路运输生产前沿面,评价各单元的相对效率,分析各要素投入的变动对产出的影响。     

飞机防冰腔结构参数的重要性测度

分析了常见的3种飞机防冰腔结构,应用Gambit软件建立了双蒙皮防冰腔结构网格模型。采用Spalart-Allmaras湍流模型模拟热气在防冰腔内的流动状况,采用Fluent软件进行传热效率分析,建立了防冰腔结构参数对传热效率的重要性测度模型。通过随机响应面法建立防冰腔结构参数与传热效率的函数关系,采用低分散性抽样法求解防冰腔结构参数的重要性测度,建立了防冰腔结构参数的重要性测度分析流程。分析结果表明:当笛形管中心到外蒙皮的距离从35.15mm增加到38.85mm时,传热系数由0.505减小到0.463;当双蒙皮通道高度从2.85mm增加到3.15mm时,传热系数由0.495减小到0.476;当射流孔孔径从1.90mm增加到2.10mm时,传热系数从0.505减小到0.494;当射流孔角度从14.25°增加到15.75°时,传热系数从0.476增加到0.494。防冰腔结构参数的重要性排序依次为射流孔角度、笛形管中心到外蒙皮距离、射流孔孔径、双蒙皮通道高度,在防冰腔结构加工与装配过程中,需要重点考虑射流孔角度与笛形管中心到外蒙皮距离这2个参数。     

Er~(3+)及Er~(3+)/Yb~(3+)掺杂YBa_3B_9O_(18)材料的发光性能

通过高温固相烧结法制备了Er3+掺杂以及Er3+/Yb3+共掺杂YBa3B9O18荧光粉.X射线衍射结果表明,Er3+/Yb3+的掺杂并没有改变基质的六方结构.应用325 nm激光激发Er3+掺杂YBa3B9O18,观察到了Er3+离子的特征发射峰,证明了Er3+离子与基质间的能量传递.应用980 nm激光分别激发Er3+掺杂以及Er3+/Yb3+共掺杂YBa3B9O18荧光粉,观测到了Er3+离子的上转换过程,该过程可通过能级图进行解释.实验结果表明Yb3+对Er3+的上转换发光有敏化作用.     

机动车交通流比功率与能耗模型研究

为研究机动车交通流能耗,将机动车交通流比功率(VSP)作为研究对象.从最常见的单车比功率研究出发,使用气体动力学交通流模型联系单车比功率与交通流整体比功率,以此建立交通流比功率模型.为使此模型具备更显著的物理意义,将交通流比功率分为两部分,一部分为平衡交通流状态下的比功率,另一部分为偏离平衡交通流状态导致的比功率变化量,模型中的交通流参数与变量能够通过现有的交通流探测设备获取.将比功率理论模型从单车扩展到了交通流,用数学公式反应了交通流状态与比功率的关系,并且证明了交通流比功率能够通过交通流参数进行估计.并由交通流比功率出发,推导出交通流比功公式.此外研究了平衡态交通流比功率及比功与密度的关系.为研究机动车交通流能耗探索了新的思路.     

船舶电力系统暂态稳定性的混合分析法

针对大型船舶电力系统的特点及其日益突出的暂态稳定性问题,开展了适用于船舶电力系统的方法研究。结合船舶电网拓扑结构自身特点,建立了适用于大扰动下暂态稳定分析的船舶柴油发电机组的动态等值模型、推进电机及其螺旋桨四象限工作特性等值模型。以船舶电网轴线为界,将系统等效成两机模型进行时域仿真分析,在此基础上建立系统能量函数,提出了一种适用于船舶电力系统的暂态稳定性混合分析法。该方法即可定量描述系统暂态稳定性及其稳定裕度,又可直观地在线监测系统各状态变量的动态过程。最后通过仿真算例验证了新方法的正确性和有效性。     

广东省天然气水运调入需求与码头接卸能力适应性分析

以广东省经济社会发展和全省的能源消耗情况为基础,运用国内生产总值能耗法分析预测广东省未来一段时期的天然气消耗量以及水运调入量,对比广东省沿海现有、拟建的LNG接卸码头通过能力,进行广东省天然气水运调入需求与码头接卸能力适应性分析。