RBF神经网络在柴油机燃油系统故障诊断中的应用研究

本文主要介绍了径向基（RBF）神经网络在柴油机燃油系统故障诊断中的应用,并且首次将神经网络和虚拟仪器技术相结合,成功用于柴油机故障诊断中。比较了RBF和误差反传（BP）神经网络的学习速度和诊断精度。研究表明,将RBF神经网络和虚拟仪器相结合进行柴油机故障诊断具有良好的诊断效果和精度,有很好的工程应用前景。     

现代汽车发动机冷却系统的发展趋势

传统发动机冷却系统由于自身的被动性影响,其工作性能受到限制。在部分负荷时会造成功率损失,而汽车在这种工况下行驶的时间最长。介绍一些先进冷却系统的结构设计和特点,如精确冷却系统、分流式冷却系统、可控式冷却系统等。这些系统既起到保护发动机的作用,又改善燃油效率和降低排放污染物。     

超声高效气化燃油的研究

目前,人们对城市空气质量以及地球石油资源危机等问题日益重视。利用浸于液体中的超声换能器产生震动的原理,将燃油破碎成极其微小的油滴,使其气化,提高燃油的利用效率,大大减少环境污染程度,因此具有极广泛的市场前景和应用价值。针对超声波气化原理、超声气化燃油装置、超声换能器及超声波发生器与换能器的匹配问题进行了讨论。     

基于内燃动车组的混合动力匹配设计研究

针对内燃动力轨道交通在实际应用中存在的不足以及当前主要新能源技术发展现状,文章结合某内燃动车组的总体参数和配置情况,将内燃机组匹配蓄电池的混合动力方案与纯内燃机组方案进行对比分析,并对混合动力选型和配置进行了计算和分析.结果表明,混合动力匹配方案在降低整车能耗和节省燃油消耗等方面有着显著的优势.     

选择性催化还原技术在船舶上应用的现状分析

本文首先介绍了IMO NOx排放规则,指出SCR技术是目前最有效的应对措施。在介绍SCR系统基本组成及工作原理的基础上,讨论了目前此领域的两个研究热点:在重质燃油的使用条件下和二冲程柴油机使用条件下的SCR系统所面临的问题。     

江海直达小型LNG运输船设计研究

讨论江海直达小型LNG运输的设计要点。以1 000 m3LNG运输船为目标,结合武汉长江大桥下游的长江平流通航条件以及投资和营运经济性,探讨相适应的船型尺度,确定合适的航速以及液货舱型式,对于机型的选择进行分析比较,提出较为合适的船型配置方案建议。     

Energy-aware control for automated container terminals using integrated flow shop scheduling and optimal control

The performance of container terminals needs to be improved to handle the growth of transported containers and maintain port sustainability. This paper provides a methodology for improving the handling capacity of an automated container terminal in an energy-efficient way. The behavior of a container terminal is considered as consisting of a higher level and a lower level represented by discrete-event dynamics and continuous-time dynamics, respectively. These dynamics represent the behavior of a large number of terminal equipment. The dynamics need to be controlled. For controlling the higher level dynamics, a minimal makespan problem is solved. For this, the minimal time required by equipment for performing an operation at the lower level is needed. The minimal time for performing an operation at the lower level is obtained using Pontryagin’s Minimum Principle. The actual operation time allowed by the higher level for processing an operation at the lower level is subsequently determined by a scheduling algorithm at the higher level. Given an actual operation time, the lower level dynamics are controlled using optimal control to achieve minimal energy consumption while respecting the time constraint. Simulation studies illustrate how energy-efficient management of equipment for the minimal makespan could be obtained using the proposed methodology.     

The design of a terminal for dangerous goods

This paper aims at examining the possibility of setting up a model terminal for the transportation of dangerous goods. It should be designed in such a manner that its use would be possible for any kind of transportation.

This consideration has been prompted by the interface between transportation planning and technology, as well as by the tendency for harmonizing international recommendations pertaining to the transportation and handling of dangerous goods, especially during the last decades where unified transport has gained ground due to the advantages provided for the safe consignment of dangerous cargoes.

Since the large increase in terminal productivity is due to the heavy investments that were effected in terminal installations and to the modernization of the administration‐management of terminals, a mathematical simulation has been adopted to assist the determination of the capacity of a terminal for dangerous goods.

It is evident that different criteria and various assumptions have been taken into account in order to facilitate a deeper analysis, without ignoring the contribution of dangerous goods to the socio‐economic development.

From the outset of the study, it was already clear that the said process will make it possible to present—as a model—a simple but well defined situation for the purpose of drawing useful conclusions.     

基于USB接口的电力机车能耗记录与分析系统

以C8051F单片机作为中央处理器,采集电参数计量模块和TAX2型机车安全综合监测装置的信息,生成并存储电量消耗记录;通过USB盘转储数据到地面进行处理和分析。系统整体设计具有模块化、准确可靠的特点,对电力机车节能降耗措施提供合理的依据。     

LPG单燃料发动机稀薄燃烧控制策略研究

针对LPG单燃料发动机,基于旋转坐标系的独立气缸模型,提出了一种采用λ型氧传感器的稀薄燃烧控制策略,大大降低了线性氧传感器所带来的高昂成本,并实现了燃气喷射的逐缸控制。试验结果表明,该控制策略在满足系统动力要求的前提下,大大降低了燃气的消耗及废气的排放,具有良好的应用前景。