Vehicle yaw stability control using active limited-slip differential via model predictive control methods

In this paper, the problem of vehicle yaw control using an active limited-slip differential (ALSD) applied on the rear axle is addressed. The controller objective is to minimise yaw-rate and body slip-angle errors, with respect to target values. A novel model predictive controller is designed, using a linear parameter-varying (LPV) vehicle model, which takes into account the ALSD dynamics and its constraints. The controller is simulated using a 10DOF Matlab/Simulink simulation model and a CarSim model. These simulations exemplify the controller yaw-rate and slip-angle tracking performances, under challenging manoeuvres and road conditions. The model predictive controller performances surpass those of a reference sliding mode controller, and can narrow the loss of performances due to the ALSD's inability to transfer torque regardless of driving conditions.     

Design of a feedback-feedforward steering controller for accurate path tracking and stability at the limits of handling

This paper presents a feedback-feedforward steering controller that simultaneously maintains vehicle stability at the limits of handling while minimising lateral path tracking deviation. The design begins by considering the performance of a baseline controller with a lookahead feedback scheme and a feedforward algorithm based on a nonlinear vehicle handling diagram. While this initial design exhibits desirable stability properties at the limits of handling, the steady-state path deviation increases significantly at highway speeds. Results from both linear and nonlinear analyses indicate that lateral path tracking deviations are minimised when vehicle sideslip is held tangent to the desired path at all times. Analytical results show that directly incorporating this sideslip tangency condition into the steering feedback dramatically improves lateral path tracking, but at the expense of poor closed-loop stability margins. However, incorporating the desired sideslip behaviour into the feedforward loop creates a robust steering controller capable of accurate path tracking and oversteer correction at the physical limits of tyre friction. Experimental data collected from an Audi TTS test vehicle driving at the handling limits on a full length race circuit demonstrates the improved performance of the final controller design.     

An efficient approach to the analysis of rail surface irregularities accounting for dynamic train–track interaction and inelastic deformations

A two-dimensional computational model for assessment of rolling contact fatigue induced by discrete rail surface irregularities, especially in the context of so-called squats, is presented. Dynamic excitation in a wide frequency range is considered in computationally efficient time-domain simulations of high-frequency dynamic vehicle–track interaction accounting for transient non-Hertzian wheel–rail contact. Results from dynamic simulations are mapped onto a finite element model to resolve the cyclic, elastoplastic stress response in the rail. Ratcheting under multiple wheel passages is quantified. In addition, low cycle fatigue impact is quantified using the Jiang–Sehitoglu fatigue parameter. The functionality of the model is demonstrated by numerical examples.     

Vehicle control synthesis using phase portraits of planar dynamics

ABSTRACT

Phase portraits provide control system designers strong graphical insight into nonlinear system dynamics. These plots readily display vehicle stability properties and map equilibrium point locations and movement to changing parameters and system inputs. This paper extends the usage of phase portraits in vehicle dynamics to control synthesis by illustrating the relationship between the boundaries of stable vehicle operation and the state derivative isoclines in the yaw rate–sideslip phase plane. Closed-loop phase portraits demonstrate the potential for augmenting a vehicle's open-loop dynamics through steering and braking. The paper concludes by applying phase portrait analysis to an envelope control algorithm for yaw stability and a sliding surface controller for stabilising a saddle point equilibrium in drifting.     

Policy challenges of increasing automation in driving

The convergence of information and communication technologies (ICT) with automotive technologies has already resulted in automation features in road vehicles and this trend is expected to continue in the future owing to consumer demand, dropping costs of components, and improved reliability. While the automation features that have taken place so far are mainly in the form of information and driver warning technologies (classified as level I pre-2010), future developments in the medium term (level II 2010–2025) are expected to exhibit connected cognitive vehicle features and encompass increasing degree of automation in the form of advanced driver assistance systems. Although autonomous vehicles have been developed for research purposes and are being tested in controlled driving missions, the autonomous driving case is only a long term (level III 2025 +) scenario. This paper contributes knowledge on technological forecasts regarding automation, policy challenges for each level of technology development and application context, and the essential instrument of cost-effectiveness for policy analysis which enables policy decisions on the automation systems to be assessed in a consistent and balanced manner. The cost of a system per vehicle is viewed against its effectiveness in meeting policy objectives of improving safety, efficiency, mobility, convenience and reducing environmental effects. Example applications are provided that illustrate the contribution of the methodology in providing information for supporting policy decisions. Given the uncertainties in system costs as well as effectiveness, the tool for assessing policies for future generation features probabilistic and utility-theoretic analysis capability. The policy issues defined and the assessment framework enable the resolution of policy challenges while allowing worthy innovative automation in driving to enhance future road transportation.     

Improvement of vehicle–turnout interaction by optimising the shape of crossing nose

Proper rail geometry in the crossing part is essential for reducing damage on the nose rail. To improve the dynamic behaviour of turnout crossings, a numerical optimisation approach to minimise rolling contact fatigue (RCF) damage and wear in the crossing panel by varying the nose rail shape is presented in the paper. The rail geometry is parameterised by defining several control cross-sections along the crossing. The dynamic vehicle–turnout interaction as a function of crossing geometry is analysed using the VI-Rail package. In formulation of the optimisation problem a combined weighted objective function is used consisting of the normal contact pressure and the energy dissipation along the crossing responsible for RCF and wear, respectively. The multi-objective optimisation problem is solved by adapting the multipoint approximation method and a number of compromised solutions have been found for various sets of weight coefficients. Dynamic behaviour of the crossing has been significantly improved after optimisations. Comparing with the reference design, the heights of the nose rail are notably increased in the beginning of the crossing; the nominal thicknesses of the nose rail are also changed. All the optimum designs work well under different track conditions.     

An investigation into the effect of suspension configurations on the performance of tracked vehicles traversing bump terrains

This is a theoretical investigation into the effect of various suspension configurations on a tracked vehicle performance over bump terrains. The model developed is validated using published experimental data of the modal characteristics of the vehicle. The desired performance is based on ride comfort via the mixed objective function (MOF), which combines the crest factor of bounce acceleration, bounce displacement, angular acceleration, and pitch angle. The optimisation process involves evaluating the MOF for different numbers and locations of dampers and under different rigid bump road conditions and speeds. The system responses of the selected suspension configurations in the time and frequency domains are compared against the undamped suspension. The results show that the suspension configurations have a significant effect on the vehicle mobility over bump road profiles. For a five-road–wheel half model of a tracked vehicle, the maximum number of dampers to use for ride comfort over these road bumps is three with the dampers located at wheel positions 1, 2 and 5. This confirms the current practice for many tracked vehicles with 10 road wheels. However, it is further shown that the suspension fitted with two dampers at the extreme road wheels offer the best performance over various rigid bump terrains.     

钢管混凝土拱桥在移动车辆荷载作用下的振动分析

以某主跨110m的自锚式钢管混凝土中承桁架拱桥为对象,分析了该桥的自由振动特性和移动车辆荷载作用下主跨桥面系的振动特性。计算结果表明:采用单轴和双轴移动车辆模型计算出的桥面系振动特性差别不大;不同车速的移动车辆荷载引起桥面系的振动响应不同,车速快时,桥面系竖向振动的最大位移减小,竖向振动的最大速度和加速度增加。     

某出口右盘轻型载货汽车空调系统项目开发总结

空调系统是目前江铃轻型载货汽车的标准配置,随着江铃汽车出口的增加,为满足相关国家多为右置转向盘的要求,企业开发右盘车的原动力也在增加。本文从开发一款右盘轻型载货汽车项目(N698项目,以下简称N698)出发,较全面地介绍了空调系统开发背景、开发原理、开发目标;较系统地阐述了整个空调系统的开发内容和布置形式,并对空调系统的开发进行了详细总结。     

关于汽车连接器护套端子退位问题的几点分析

针对汽车连接器使用护套产品存在的端子退位问题,进行必要的技术分析,从而找到解决端子退位的方法。