重庆轻轨较新线二期工程简支PC轨道梁设计

该文介绍了重庆轻轨较新线二期工程简支PC轨道梁设计情况,并与一期工程的设计进行了比较,对轨道梁的设计思路进行了探讨。     

埋地管道周围温度场数值模拟的研究现状及趋势

预测埋地管道周围温度场与水分场的变化关系对管道的建设至关重要。数值计算是预测埋地管道周围温度场的有效手段,文中叙述了国内外学者在土壤温度场与水分场耦合作用方面研究现状及对埋地管道周围温度场的研究成果,通过分析提出了几点对埋地管道周围土壤温度场数值模拟的建议。     

基于MRF方法和滑移网格的螺旋桨水动力性能研究

本文基于计算流体力学(CFD)方法,对多重参考系模型(MRF)及滑移网格模型(SM)在计算螺旋桨水动力性能时的差异进行了探讨。将以上两种模型应用到4381螺旋桨的水动力性能计算中,首先将计算得到的推力系数及转矩系数与试验数据进行了对比,考察了两种计算模型对螺旋桨的敞水性能的预测情况,并进一步对两种模型计算得到的螺旋桨盘面的速度场、桨叶的压力分布、桨后涡量云图等进行了对比分析。计算结果表明,滑移网格模型相较于多重参考系模型,对螺旋桨的推力系数的模拟结果误差更小,扭矩系数方面,两种模型的模拟结果相差不大;对于进速系数较大时,两种模型模拟得到的压力分布及速度分布较为相似,但对于高负荷情况,滑移网格模型可以更好地捕捉桨叶的压力分布及桨盘面处的速度分布情况;进速系数较小时,多重参考系模型可以模拟出涡结构的发散现象,而滑移网格模型可以更好的在高进速系数情况下捕捉到梢涡结构。     

米勒循环结合可变涡轮增压优化柴油机性能的仿真与试验研究

在开发一款机车柴油机过程中,利用AVL BOOST软件对柴油机工作过程进行了仿真计算,计算了不同米勒强度和不同喷油正时条件下柴油机的性能参数。根据计算结果,排除了弱米勒的方案。针对强米勒和中米勒,开展了试验研究,通过调整喷油定时、增压压力设定、共轨喷射压力,进行了多方案试验研究,试验结果表明,强米勒方案虽然可以有效降低Nox排放,但是带来PM排放升高和涡轮前排气温度升高的问题,中米勒虽然降低Nox排放的效果弱于强米勒,但是能获得比较满意的PM排放,且涡轮前排气温度远低于强米勒,综合各方面性能参数的比较结果,在满足排放要求的前提下,中米勒为优选方案。     

考虑健康损失的路阻模型的构建

运用高斯烟羽模型计算机动车尾气排放量,然后利用支付意愿法定量分析健康损失,同时考虑延误和健康损失构建考虑健康损失的路阻模型。根据实例,分别使用Transcad和新的路阻模型计算出2个路阻,并进行交通分配。结果显示2次交通分配的路网流量不同,表明考虑健康损失的路阻模型影响了人们的出行选择,可有效解决主干路拥挤,增加次干路车流量,协调整个路网车流量均衡,提高路网交通效率。     

三角闸门门缝输水运行工况研究

门缝输水是三角闸门的一种重要特性。基于三角闸门门缝输水,低水头船闸可以不设置阀门以降低工程建设成本,但具体适用工况尚难把握。依托未设置阀门的大柳巷船闸,采用理论计算与现场实测相结合的方法,分析了门缝输水时水力及启闭力。研究表明:口门越大三角闸门能承受门缝输水的水头越小;目前门缝输水有关计算公式尚需结合三角闸门的结构特点确定流量系数;三角闸门启闭力除按规范公式计算外还应考虑门体缝隙流和惯性阻力矩的影响。     

基于南方CASS软件的土方量计算方法

威海内海吹填工程主要施工内容是采用吹砂挤淤方式进行吹填,吹填区吹填完成后采用机械压实。在施工过程中须多次对吹填区进行进度测量,涉及土方量的计算频率较高。为保证工程土方量的计算准确,将南方CASS软件的不同土方量计算方法进行对比,并结合工程实际情况分析选择合理的计算方法,从而为工程质量和进度控制提供依据。结果表明,选择合适的计算方法不仅能够准确地计算土方量,还能形象地反映现场的实际情况。     

重庆市内河船舶污染物排放现状及LNG动力船舶推广效益分析

重庆地处长江上游经济带核心地区,水运发达,随着客货运量逐年增加,通行的内河船舶尾气排放严重影响港口及航道附近大气环境,已成为重庆大气污染的主要来源之一,颗粒物、NO_x的排放分别占重庆市总排放的4.3%、21.9%,SO_2占年排放的7.4%(14.8%。在大气环境问题日益严峻的情况下,LNG动力船舶因其可明显降低排气污染物,越发受到社会关注,对重庆市单LNG动力示范船舶尾气排放进行实测,对比柴油动力船舶,颗粒物、NO_x、SO_2减排显著,减排率分别达99.94%、72.69%、100%。因此,LNG动力船舶的推广表现出明显的环境效益,同时,综合分析了当前LNG动力船舶推广存在问题及困难。     

Efficiency evaluation and PM emission reallocation of China ports based on improved DEA models

The emission of particulate matter (PM) and other atmospheric pollutants in port operations and shipping have caused a huge negative impact on the environment. Consequently, how to evaluate the environmental efficiency of ports and put forward corresponding countermeasures on this basis is becoming a more important issue than ever before from the perspectives of the government, academia, and society. We construct three data envelopment analysis (DEA) models to evaluate the environmental efficiency of ports under the circumstances of environmental control, non-environmental control and PM emission through inter-ports cooperation. The innovation of the DEA models constructed in this paper lies in: (1) Setting environmental control parameters to uniformly manipulate the situations of environmental control and non-environmental control, etc.; (2) Allowing non-equal proportional change of input index, expected output and non-expected output index; (3) Setting preference coefficients for ports to admit favorable decisions; (4) Providing a distance formula of expected output for PM emission reallocation. Further, data from 11 major ports in China are collected to compare the expected output under different PM emission standards assuming the situation of environmental control and non-environmental control, port cooperation, and non-cooperative sewage discharge. The empirical results show that: (1) Ports in the eastern China (Shanghai, Ningbo, and Nanjing) have higher port efficiency; (2) Port cooperation can improve the overall expected output but it will lose its edge with the improvement of PM emission standards. (3) Ports follow the same trend of output loss regardless of favorable decisions. In the end, the author makes a summary, puts forward relevant policy suggestions and makes the recommendation for future research.     

Decouple transport CO2 emissions from China’s economic expansion: A temporal-spatial analysis

China’s transport industry is energy intensive and high-polluting. While with the surging urbanization and the development of service industry, China’s economic relies more and more on the transport sector. Therefore, exploring the relationship between transport energy-related carbon emission (TECE) and economic development is crucial to the realization of China’s “Post Paris” mitigation target. The paper carries out a decoupling research between TECE and Gross domestic product (GDP) at both national level and province level based on Logarithmic Mean Divisia Index (LMDI) decomposition analysis with the extended Kaya identity and Tapio decoupling model. The model quantifies eight factors’ effects on the relationship with focusing on external macro socio-economic related factors (i.e., spatial pattern, urbanization, per capita service industry output value, reciprocal of the service industry’s share of GDP, and demographic variable) successfully. The key conclusions are indicated as follows: (1) the national decoupling status was extensive coupling during 2004–2010 and then weak decoupling during 2010–2016. The progress can be attributed to the decline of energy intensity. (2) Per capita service output was always the prominent factor to promote carbon emissions growth in different time periods and provinces with inhibiting the advancement of decoupling process, followed by urbanization. (3) Scenario analysis shows that with the continuous growth of traffic demand and the promotion of urbanization, improving energy efficiency has become the key link to realize the decoupling between China’s TECE and its economy.