某船用柴油机SCR尿素喷射系统结构参数仿真优化

在建立的SCR系统三维仿真模型基础上,首先通过仿真性能分析,初步确定了尿素喷嘴位置、喷孔直径、喷孔数目及喷射方向等尿素喷射结构参数范围,然后采用正交试验法确定尿素喷射结构参数仿真试验方案。以NO_X转化率为优化目标,通过极差分析和方差分析得到优化的尿素喷射结构参数方案为:喷嘴与催化剂入口距离为7倍管径,喷嘴孔数为6孔,喷嘴孔径为0.6 mm,喷射锥角为30°。     

An integrated framework for embedding large-scale dynamic traffic assignment models in advanced traveler information systems

In recent years, increasing attention has been drawn to the development of various applications of intelligent transportation systems (ITS), which are credited with the amelioration of traffic conditions in urban and regional environments. Advanced traveler information systems (ATIS) constitute an important element of ITS by providing potential travelers with information on the network's current performance both en-route and pre-trip. In order to tackle the complexity of such systems, derived from the difficulty of providing real-time estimations of current as well as forecasts of future traffic conditions, a series of models and algorithms have been initiated. This paper proposes the development of an integrated framework for real-time ATIS and presents its application on a large-scale network, that of Thessaloniki, Greece, concluding with a discussion on development and implementation challenges as well as on the advantages and limitations of such an effort.     

构建西江现代物流体系 打造世界加工制造次中心

文章基于当前产业结构大调整背景,提出广西要在迎接产业转移的竞争中胜出,必须着力构建以西江水运为龙头的现代物流体系,从而把西江经济带打造成为与＂珠三角＂这一世界加工制造中心紧密联动的加工制造次中心。     

石粉对机制砂混凝土性能的影响研究

文章通过试验研究了石粉对机制砂混凝土工作性能、力学性能、强度、合理砂率及耐久性的影响规律。结果表明,在含量不超过10%的情况下,石粉对机制砂混凝土的物理力学性能及工作性能具有一定的改善效果;机制砂混凝土的合理砂率对石粉含量较为敏感,石粉含量为0%、5%和10%时的最佳砂率分别为36%、33%和30%;石粉的掺入降低了机制砂混凝土抗氯离子渗透性能。     

免棱镜全站仪在旧桥几何尺寸测量中的应用

文章介绍了采用免棱镜全站仪进行旧桥几何尺寸测量的主要内容、优点、测点布置情况及方法,并结合具体工程实例,探讨了免棱镜全站仪的使用效果。     

特大桥施工测量精度浅析

文章以兰渝铁路嘉陵江双线特大桥为工程背景,在介绍施工测量平面控制网的基础上,阐述了桥梁施工测量放样的精度要求及具体控制措施,分析了测量误差产生的原因,并提出了相应的测量精度评定方法。     

调距桨桨叶连接螺栓过渡圆角光弹性试验研究

苛刻的空间尺寸要求和严酷的使用环境使得调距桨桨叶连接螺栓设计极为重要,为研究连接螺栓螺帽螺杆圆角过渡区域因截面形状突变存在的应力集中情况和应力分布规律,以某型调距桨桨叶连接螺栓联接组件作为试验模型,采用光弹性试验方法测得其应力分布和应力集中系数,并与有限元仿真分析结果进行了对比验证,为桨叶连接螺栓组件结构设计及其优化提供重要支撑。     

“天鲲”号超大型自航绞吸挖泥船总体设计技术

结合国内外超大型绞吸挖泥船的特点和发展趋势,对我国自主研发设计的"天鲲"号超大型自航绞吸挖泥船的船型、主尺度和总布置等总体设计要点进行详细论述,形成了大型绞吸式挖泥船船型论证分析的总体思路,为超大型自航绞吸式挖泥船的总体设计提供参考,提升了国内整体绞吸船的设计和建造水平。     

地下交通转换平台射流通风特性及风流组织方式研究

为探究地下交通转换平台内通风系统的合理布局,采用比尺模型试验和CFD模拟相结合的方法,研究射流风机和通风组织对地下交通转换平台内气流运动的影响。结果表明： 1）当联络通道内风机射流朝向敞开段时,为使风机升压系数Kj最大,630 mm、900 mm、1 120 mm射流风机的布设位置应距离敞开段分别大于40、50、65 m; 2）大口径射流风机具有更大的Kj,但占用的断面空间更大,且射流诱导段更长,应根据联络通道长度和高度合理选择射流风机口径; 3）地下交通转换平台的通风组织不宜采用同侧开启方式,采用对角抽吸方式时,联络通道内的污染物混入比最低、通风效率最高。     

Developing an enhanced weight-based topological map-matching algorithm for intelligent transport systems

Map-matching (MM) algorithms integrate positioning data from a Global Positioning System (or a number of other positioning sensors) with a spatial road map with the aim of identifying the road segment on which a user (or a vehicle) is travelling and the location on that segment. Amongst the family of MM algorithms consisting of geometric, topological, probabilistic and advanced, topological MM (tMM) algorithms are relatively simple, easy and quick, enabling them to be implemented in real-time. Therefore, a tMM algorithm is used in many navigation devices manufactured by industry. However, existing tMM algorithms have a number of limitations which affect their performance relative to advanced MM algorithms. This paper demonstrates that it is possible by addressing these issues to significantly improve the performance of a tMM algorithm. This paper describes the development of an enhanced weight-based tMM algorithm in which the weights are determined from real-world field data using an optimisation technique. Two new weights for turn-restriction at junctions and link connectivity are introduced to improve the performance of matching, especially at junctions. A new procedure is developed for the initial map-matching process. Two consistency checks are introduced to minimise mismatches. The enhanced map-matching algorithm was tested using field data from dense urban areas and suburban areas. The algorithm identified 96.8% and 95.93% of the links correctly for positioning data collected in urban areas of central London and Washington, DC, respectively. In case of suburban area, in the west of London, the algorithm succeeded with 96.71% correct link identification with a horizontal accuracy of 9.81 m (2σ). This is superior to most existing topological MM algorithms and has the potential to support the navigation modules of many Intelligent Transport System (ITS) services.