《MARPOL73/78》附则VI与柴油机NO_x排放控制技术

着重介绍《MARPOL 73/78》附则VI的起源和发达国家船舶柴油机氮氧化物(NOx)的排放控制技术发展状况,随着《MARPOL 73/78》附则VI的正式实施和今后国际海事组织(IMO)对《MARPOL 73/78》附则VI的进一步修订,船舶柴油机NOx的排放控制及其相关技术会受到包括轮机管理在内的相关人员越来越多的关注。     

进气预混甲醇降低柴油机碳烟与NOx排放的影响参数研究

在485QDI自然吸气直喷式柴油机上研究了不同喷嘴、不同供油定时、不同喷醇的起点对进气预混甲醇发动机的碳烟、NOx排放和经济性的影响。研究结果表明，为了降低碳烟和NOx排放以及提高燃油经济性，与燃用纯柴油的发动机相比，进气预混甲醇发动机的柴油喷射定时可以保持不变或稍小，但燃油喷嘴的孔径应适当减小，预混甲醇的发动机负荷起点应适中。     

柴油、乳化油和甲醇喷雾燃烧光强波的研究

探讨了柴油机燃烧光强波的性质。在不同压力、氧浓度的条件下，对柴油、乳化油、甲酵喷雾的燃烧光强波进行了测量分析。结果表明，柴油机的燃烧光强波所反应的是火焰内碳粒的氧化历程。对于不同的燃料，燃烧光强波的强弱并不仅仅取决于火焰中碳粒的数量，同时还取决于火焰中的氧浓度。     

GZ机油添加剂对发动机环保性能影响的试验研究

通过对各种汽油机、柴油机进行的有无GZ添加剂时的对比试验,证明了GZ机油添加剂能降低发动机的机械噪声,减少柴油机排气烟度和汽油机的怠速有害排放,改善发动机的环保性能。     

Correlation between automotive CO, HC, NO, and PM emission factors from on-road remote sensing: implications for inspection and maintenance programs

Carbon monoxide (CO), hydrocarbon (HC), and nitrogen oxide (NO) emission factors (EFs) are measured with a commercial vehicle emissions remote sensing system (VERSS) during a large-scale vehicle exhaust emissions study in Las Vegas. Particulate matter (PM) EFs are simultaneously measured for individual vehicles with a newly developed PM-VERSS based on ultraviolet backscatter light detection and ranging (Lidar). The effectiveness of CO and HC EFs as proxy for NO and PM EFs for spark-ignition vehicles is evaluated. Poor correlations were found between EFs for pollutants on an individual vehicle basis indicating that high EFs for one or more pollutants cannot be used as a predictor of high EFs for other pollutants. Stronger functional relationships became evident after averaging the EF data in bins based on rank-order of a single pollutant EF. Low overlap between the highest 10% emitters for CO, HC, NO, and PM was found. These results imply that for an effective reduction of the four pollutants, inspection and maintenance (I/M) programs, including clean screening, should measure all four pollutants individually. Fleet average CO and HC concentrations determined by gaseous VERSS were compared with fleet average CO and HC concentrations measured at low-idle and at high-idle during local I/M tests for spark-ignition vehicles. The fleet average CO concentrations measured by I/M tests at either idle were about half of those measured by remote sensing. The fleet average high-idle HC concentration measured by I/M tests was about half of that measured by VERSS while low-idle I/M and VERSS HC average concentrations were in better agreement. For a typical vehicle trip, most of the fuel is burned during non-idle conditions. I/M measurements collected during idling conditions may not be a good indicator of a vehicle’s potential to be a high emitter. VERSS measurements, when the vehicle is under a load, should more effectively identify high emitting vehicles that have a large contribution to the mobile emissions inventory.     

碳纤维复合材料与铝合金连接方式选型研究

多材料混合车身设计是汽车轻量化的重要手段,其中铝和碳纤维的连接是轻量化车身结构设计和工艺装配面临的挑战.研究了SPR、FDR、抽芯铆钉3种连接方式及结构胶应用于碳纤维复合材料和铝合金异种材料的连接,测定了连接结构的剪切和十字拉伸性能,分析了连接方式和结构胶对力学性能和失效模式的影响,旨在指导碳纤维复合材料连接设计与选择...     

潜艇舱室固态胺CO2清除技术的化学热力学分析

依据有关文献提供的热力学状态函数值,分水蒸气再生和真空再生2种工况,近似计算了标准状态和实际状况下固态胺吸附与解吸CO2反应的平衡与程度,并讨论了温度、湿度和CO2分压等对其所产生的影响。     

价值工程理论在沥青混合料碳排放减排措施中的应用

沥青混合料碳排放减排措施是降低碳排放的有效手段,而对减排措施的选择将直接影响工程的质量和经济效益。本文运用价值工程理论的基本原理与方法,论述价值工程在减排措施选择中的应用方法和步骤,并结合工程实例,对减排措施方案的选择进行研究。结果表明,运用价值工程理论的方法可以择优确定沥青混合料碳排放减排措施。     

Decouple transport CO2 emissions from China’s economic expansion: A temporal-spatial analysis

China’s transport industry is energy intensive and high-polluting. While with the surging urbanization and the development of service industry, China’s economic relies more and more on the transport sector. Therefore, exploring the relationship between transport energy-related carbon emission (TECE) and economic development is crucial to the realization of China’s “Post Paris” mitigation target. The paper carries out a decoupling research between TECE and Gross domestic product (GDP) at both national level and province level based on Logarithmic Mean Divisia Index (LMDI) decomposition analysis with the extended Kaya identity and Tapio decoupling model. The model quantifies eight factors’ effects on the relationship with focusing on external macro socio-economic related factors (i.e., spatial pattern, urbanization, per capita service industry output value, reciprocal of the service industry’s share of GDP, and demographic variable) successfully. The key conclusions are indicated as follows: (1) the national decoupling status was extensive coupling during 2004–2010 and then weak decoupling during 2010–2016. The progress can be attributed to the decline of energy intensity. (2) Per capita service output was always the prominent factor to promote carbon emissions growth in different time periods and provinces with inhibiting the advancement of decoupling process, followed by urbanization. (3) Scenario analysis shows that with the continuous growth of traffic demand and the promotion of urbanization, improving energy efficiency has become the key link to realize the decoupling between China’s TECE and its economy.     

Benefit of speed reduction for ships in different weather conditions

Currently, the shipping industry is facing a great challenge of reducing emissions. Reducing ship speeds will reduce the emissions in the immediate future with no additional infrastructure. However, a detailed investigation is required to verify the claim that a 10% speed reduction would lead to 19% fuel savings (Faber et al., 2012).This paper investigates fuel savings due to speed reduction using detailed modeling of ship performance. Three container ships, two bulk carriers, and one tanker, representative of the shipping fleet, have been designed. Voyages have been simulated by modeling calm water resistance, wave resistance, propulsion efficiency, and engine limits. Six ships have been simulated in various weather conditions at different speeds. Potential fuel savings have been estimated for a range of speed reductions in realistic weather.It is concluded that the common assumption of cubic speed-power relation can cause a significant error in the estimation of bunker consumption. Simulations in different seasons have revealed that fuel savings due to speed reduction are highly weather dependent. Therefore, a simple way to include the effect of weather in shipping transport models has been proposed.Speed reduction can lead to an increase in the number of ships to fulfill the transport demand. Therefore, the emission reduction potential of speed reduction strategy, after accounting for the additional ships, has been studied. Surprisingly, when the speed is reduced by 30%, fuel savings vary from 2% to 45% depending on ship type, size and weather conditions. Fuel savings further reduce when the auxiliary engines are considered.