排序方式: 共有52条查询结果,搜索用时 15 毫秒
21.
22.
车辆动力学性能开发包括性能目标设定、目标分解、优化设计、底盘调校,逐渐向目标达成逼近,开发结束后实现目标达成。性能目标分解即指标分解,用简单有物理意义的理论公式关联整车指标与总成指标,将整车的客观性能指标分解至系统特性,是整车性能目标达成的关键环节,在性能开发中承上启下,是各主机厂的核心技术。性能指标分解正常在车辆开发初期,用于指标分解的模型应采用尽可能少的建模参数,建模分析迅速且模型能明确表达系统参数对整车性能的影响规律。ADAMS或CarSim模型,由于模型结构过于复杂,不适用于车辆性能的指标分解。本文建立了用于性能指标分解的模型,并基于此模型研究底盘动力学操稳转向性能指标的分解及应用方法,为车辆动力学性能开发工作提供理论指导。 相似文献
23.
In order to explore the influence of different factors on the emissions of heavy diesel vehicles, a chassis dynamometer was used to test and analyze a Euro VI standard heavy-duty diesel vehicle under different load, fuel, driving conditions, and resistance conditions. The full load condition was found to increase NOx emissions by about 0.107 g/km (30%) and the particulate matter (PM) by 0.003 g/km (18%) compared to the empty load condition. Compared with the China V diesel, the NOx emissions of the Beijing VI diesel were reduced by 0.065 g/km (18%), and PM decreased by 0.004 g/km (25%). The HC, CO, PM, and NOx emissions measured during the Chinese World Harmonized Transient Cycle (C-WHTC) were 0.002 g/km (27%), 0.0005 g/km (14%), 0.0024 g/km (15%), and 0.092 g/km (25%) higher, respectively, than those measured during the European Transient Cycle (ETC). The HC, CO, PM, and NOx emissions measured by using the test resistance were 0.002 g/km (28%), 0.001 g/km (25%), 0.003 g/km (18.7%), and 0.09 g/km (25.7%) higher, respectively, than those calculated with the recommended formula. 相似文献
24.
25.
摩托车国Ⅲ工况排放测试和耐久性测试中,摩托车要在底盘测功机上跟踪规定的曲线行驶,风机模拟道路行驶中的自然风冷却车辆,速度满足风速等于车速。由于从风机出口断面到摩托车发动机有一定距离,随着距离的增加,出口风速、风量会发生衰减和扩散,这样,到达发动机的风速必然小于车速,致使冷却效果下降,模拟效果不佳,长时间运行还会对发动机、催化转化器产生损害,影响排放结果。 相似文献
26.
摩托车工况排放试验系统复杂,影响因素多,要想获得准确、可靠的测量数据,一方面要严格按照法规要求适时调整产品和设备,并经常性地通过对比试验进行验证;另一方面要排除各种其它因素的影响,这点很重要. 相似文献
27.
28.
29.
Wang Xiongjian;Liu Jie(Zhejiang Sanlang Lubrication Technology Co.,Ltd.Ningbo 315700) 相似文献
30.
随着我国汽车修理技术的提升,在车辆动力性检测中以开始用汽车底盘测功机,来检测车辆动力性。要知道动力性检测在车辆中显得尤为重要,下面本文就来介绍汽车底盘测功机在车辆动力性检测中的应用。 相似文献