Tyre-force estimation by Kalman inverse filtering: applications to off-highway mining trucks

Kalman inverse filtering is used to develop a methodology for real-time estimation of forces acting at the interface between tyre and road on large off-highway mining trucks. The system model formulated is capable of estimating the three components of tyre-force at each wheel of the truck using a practical set of measurements and inputs. Good tracking is obtained by the estimated tyre-forces when compared with those simulated by an ADAMS virtual-truck model. A sensitivity analysis determines the susceptibility of the tyre-force estimates to uncertainties in the truck’s parameters.     

On the performance of rheological shock absorber models in full vehicle simulation

A comparative study of the performance of three rheological automotive shock absorber models as well as of an extended force–velocity relation in full vehicle simulation is performed. Simulation results for both the shock absorber test rig and a full vehicle crossing a single obstacle are compared with measured data. While the gain of accuracy by the extended force–velocity relation is marginal, the rheological models in general yield a noticeable improvement, which, however, in full vehicle simulation is less significant than in test rig simulation. Among the rheological models studied here, the one consisting of a nonlinear spring–dashpot element with an element modelling friction by a continuous transition from the compression to the extension range in parallel and a quadratic approximation of the static gas force exhibits the best global performance.     

重工业厂房建筑造型设计初探

在过去很长时间内,工业厂房建筑的造型设计简单,有很大局限性。从重工业建筑造型设计的特点和重要性出发,对重工业厂房建筑的造型各种种类和发展方向进行了分析和探讨。通过对建筑造型的思考和设计,使工业厂房建筑和环境相协调。     

Noise,vibration, harshness model of a rotating tyre

ABSTRACT

The tyre plays a fundamental role in the generation of acoustically perceptible driving noise and vibrations inside the vehicle. An essential part of these vibrations is induced by the road excitation and transferred via the tyre into the vehicle. There are two basic ways to study noise, vibration, harshness (NVH) behaviour: Simulations in time and frequency domains. Modelling the tyre transfer behaviour in frequency domain requires special attention to the rotation of the tyre. This paper shows the approach taken by the authors to include the transfer behaviour in the frequency range up to 250?Hz from geometric road excitations to resulting spindle forces in frequency domain. This paper validates the derived NVH tyre model by comparison with appropriate transient simulations of the base transient model.     

Exploiting floating car data for time-dependent Origin–Destination matrices estimation

The study evaluates the added value generated by estimating dynamic demand matrices by information gathered from Floating Car Data (FCD).

Firstly, adopting a large dataset of FCD collected in Rome, Italy, during May 2010, all the monitored trips on a specific district of the city (Eur district) have been collected and analysed in terms of (i) spatial and temporal distribution; (ii) actual route choices and travel times. The data analysis showed that demand data from FCD are usually not suitable to retrieve directly demand matrices, due to a strong dependence of this information from the penetration rate of the monitoring device. Instead, origin–destination travel times and route choice probabilities from FCD are a much more reliable and powerful information with respect to FCD origin–destination flows, since they represent the traffic conditions and behaviors that vehicles experiment along the path.

Thus, several synthetic experiments have been conducted adopting both travel times and route choice probabilities as additional information, with respect to standard link measurements, in the dynamic demand estimation problem. Results demonstrated the strength and robustness associated to these network based data, while link measurements alone are not able to define the real traffic pattern. Adopting both the information of origin–destination travel times and route choice probabilities during the demand estimation process, the spatial and temporal reliability of the estimated demand matrices consistently increases.     

Rollover risk prediction of heavy vehicles by reliability index and empirical modelling

This paper focuses on a combination of a reliability-based approach and an empirical modelling approach for rollover risk assessment of heavy vehicles. A reliability-based warning system is developed to alert the driver to a potential rollover before entering into a bend. The idea behind the proposed methodology is to estimate the rollover risk by the probability that the vehicle load transfer ratio (LTR) exceeds a critical threshold. Accordingly, a so-called reliability index may be used as a measure to assess the vehicle safe functioning. In the reliability method, computing the maximum of LTR requires to predict the vehicle dynamics over the bend which can be in some cases an intractable problem or time-consuming. With the aim of improving the reliability computation time, an empirical model is developed to substitute the vehicle dynamics and rollover models. This is done by using the SVM (Support Vector Machines) algorithm. The preliminary obtained results demonstrate the effectiveness of the proposed approach.     

Modelling minimum-time manoeuvering with global optimisation of local receding horizon control

In this paper, we explore the notion that a human driver uses a receding horizon model predictive control (MPC) scheme for minimum-time manoeuvering. However, MPC is an inherently sub-optimal control scheme because not all future information is incorporated into its finite preview horizon. In many practical applications, this sub-optimality is tolerated as the solution is sufficiently close to optimal. However, it is known that professional drivers have the ability to learn driving circuits and exploit its features to minimise their global manoeuvering time. In this paper, we will model their process with a cascaded optimisation structure. Therein, the inner-loop features a local MPC scheme tasked with finding the control inputs that achieve a blended objective of minimising time and maximising velocity in each preview horizon/distance. The outer loop of this cascaded structure computes the best set of weights for the two components of the local objectives in order to minimise the global manoeuvering time. The proposed cascaded optimisation and control approach is compared against a straight-forward fixed-cost time optimal MPC applied to minimum-time manoeuvering over two well-known race courses. The paper also includes an extended literature review and details of the computational formulation of the model approach.     

Physical processes in wheel–rail contact and its implications on vehicle–track interaction

Friction within the wheel–rail contact highly influences all aspects of vehicle–track interaction. Models describing this frictional behaviour are of high relevance, for example, for reliable predictions on drive train dynamics. It has been shown by experiments, that the friction at a certain position on rail is not describable by only one number for the coefficient of friction. Beside the contact conditions (existence of liquids, solid third bodies, etc.) the vehicle speed, normal loading and contact geometry are further influencing factors. State-of-the-art models are not able to account for this sufficiently. Thus, an Extended-Creep-Force-Model was developed taking into account effects from third body layers. This model is able to describe all considered effects. In this way, a significant improvement of the prediction quality with respect to all aspects of vehicle–track interaction is expected.     

考虑船体变形耦合作用的船舶推进系统建模与控制

提出考虑船体变形耦合作用的船舶推进系统仿真建模设计方法与系统框架,通过船体变形与动力装置振动烈度间的量化关系体现耦合作用对模型的影响;研究适合推进系统的先进控制技术,通过对简化后的船舶推进系统不确定模型进行仿真试验,结果表明,具有强自适应能力的神经网络控制和模糊控制技术能够满足系统对不确定性及时变非线性控制的要求,具有良好的控制效果。     

Vehicle dynamics control of an electric-all-wheel-drive hybrid electric vehicle using tyre force optimisation and allocation

ABSTRACT

Hybrid Electric Vehicles (HEV) offer improved fuel efficiency compared to conventional vehicles at the expense of adding complexity and at times, reduced total power. As a result, HEV generally lack the dynamic performance that customers enjoy. To address this issue, the paper presents a HEV with electric All-Wheel-Drive capabilities via the use of torque vectoring electric rear axle drive (TVeRAD) to power the rear axle. The addition of TVeRAD to a front wheel drive HEV improves the total power output. To improve the handling characteristics of the vehicle, the TVeRAD provides torque vectoring at the rear axle. A bond graph model of the drivetrain is developed and used in co-simulation with CarSim. The paper proposes a control system which utilises control allocation to optimise tyre forces. The proposed control system is tested in the simulation environment with a high fidelity CarSim vehicle model. Simulation results show the control system is able to maximise vehicle longitudinal performance while avoiding tyre saturation on low mu surfaces. More importantly, the control system is able to track the desired yaw moment request on a high speed double lane change manoeuvre through the use of the TVeRAD to improve the handling characteristic of the vehicle.