中间轴驱动装置固定对弹性悬挂式机车动力学性能的影响

为防止弹性悬挂式机车中间轴驱动装置横向位移过大,发生碰撞,提出了端轴驱动装置弹性悬挂、中间轴驱动装置固定连接的方式。利用多体动力学软件SIMPACK建立整车动力学模型,对比分析驱动装置悬挂方式对机车动力学性能的影响,认为采用这种悬挂方式是合理可行的。     

Experimental ivnestigation on flow fields of viscous fluid around two-dimensional wings and comparison with computational results

To examine the flow field of a viscous fluid around the trailing edge of a wing with respect to the Kutta condition or the Joukowski hypothesis, an experimental investigation into the velocity fields around two-dimensional (2D) wings NACA0012 and NACA4412 was carried out using an X-type hot-wire anemometer in a wind tunnel and the method of colored milk injection in a circulating water channel. The results of these investigations revealed that the flow of a viscous fluid at the trailing edge of a 2D wing is tangential to the face on the pressure side, and that the flow is very slow or reversed on the suction side due to separation when the angle of attack is greater than 7.5°. By flow visualization, a Kármán vortex street was found in the wake of both wings (NACA0012 and NACA4412) when the angle of attack was 5°. These results show that the ordinary Kutta condition with respect to the direction of outflow at the trailing edge is not necessarily satisfied in a viscous fluid, but the Kutta condition with respect to the pressure at the trailing edge is satisfied as usual. Numerical results, which have been obtained as the solution of Reynolds-averaged Navier-Stokes equations, show good agreement with above-mentioned experimental results. Therefore, CFD (Computational Fluid Dynamics) simulation has proved to be very effective for studying steady viscous flow around the trailing edge of a 2D wing.     

流函数法在减径拔管上限分析中的应用

应用流函数法建立减径拔管的动可容速度场，用上限原理得出减径拔管的上限解，分析了摩擦状态，变形程度及相对壁厚等工艺参数对拉拔载荷的影响，从而得出最佳工艺参数。     

成昆线红层地区泥石流沟侵蚀程度量化分析

以成昆铁路红层地区的3个小流域为研究区,计算3个年份的地面割裂度及其年平均变化率,分析用地面割裂度表征泥石流沟侵蚀程度的不足及其原因。基于泥石流沟发育的物理模型,以原来的地面割裂度定义为基础,引入表述沟谷分布零散程度的异型度因子,导出新侵蚀系数公式。以3个小流域固体物质的年平均流失量作为侵蚀程度强弱的标准,采用非参数统计推断方法,将侵蚀系数、地面割裂度的年变化值和固体物质的年平均流失量作秩统计和次序统计。对秩统计参数和次序统计参数比较结果表明:在表征泥石流沟侵蚀程度方面,侵蚀系数优于地面割裂度。     

基于虚拟样机技术的高速弓网系统研究

虚拟样机技术的核心是参数化、可视化设计和综合性能分析。本文结合我国250km/h高速受电弓设计,应用虚拟样机技术,对铁路接触网-受电弓系统进行系统研究。在进行受电弓可视化三维实体设计的基础上,应用多体系统动力学软件SIMPACK和有限元计算软件ANSYS,进行了受电弓的几何分析及受电弓零部件的强度和刚度校核,计算了接触网振动模态和自振频率;运用结构子结构方法,建立了受电弓-接触网耦合系统模型,计算了不同模拟运行速度下的弓网振动和接触压力响应,以及机车运行振动对受流的影响;最后为了考核接触网的疲劳可靠性,进行了在运行条件下的接触网动应力研究。     

Multiphysic modelling of railway vehicles equipped with pneumatic suspensions

This article presents a multidisciplinary approach of railway pneumatic suspension modelling: both multibody and pneumatic aspects are taken into account. The work aims at obtaining a realistic model of the secondary suspension and coupling it with a multibody model of a train. Various components of the pneumatic circuit such as bellows, tanks, pipes and valves are taken into account. The article focuses on the bellow-pipe-tank subsystem for which several modelling approaches are presented and compared. Differences between differential and algebraic models are highlighted, and an application-dependent choice between them is suggested. A complete model of the pneumatic circuit is then obtained and coupled with a multibody model of the train. As a result, the behaviour of a suburban train equipped with a pneumatic secondary suspension is analysed, in particular undesired oscillating motions which affect the comfort. Topological modifications and improvements of the suspension are also investigated and discussed.     

B_0-B_0机车转向架直线运行横向轮/轨力和蛇行稳定性的理论研究(上)

本文根据轮/轨蠕滑理论提供了计算和分析B_0—B_0机车转向架直线运行横向轮/轨力的方法,并以SS4型电力机车作为验证实例,理论计算和实际测试的结果相接近。作者采用这种方法对轮/轨力进行可靠的分析,旨在论证我国现有电力机车转向架蛇行稳定性所要求的最佳轮对定位刚度。本文论证结果符合于作者在文献[1]中提出的轮对定位新方案,它可适用于最大运行速度为100km/h的现有SS型电力机车。     

青岛港前湾三期工程流场变化及泥沙分析

通过对镰湾河填海造陆工程流场计算和泥沙的分析研究,得到镰湾河流场变化及泥沙变化的有关规律。     

基于光流法的舰船运动要素测定原理研究

对基于光流法的舰船运动要素测定原理进行了研究，主要包括光流法测定舰船运动要素的思想、光流场解算、三维运动参数解算和舰船运动要素解算。该方法的提出，提高了运动要素测定的自主性，而且满足新型全封闭舰船的测定要求。     

无公用轴独立旋转车轮转向架直线横向动力学研究

无公用轴独立旋转车轮转向架的车辆不仅左右车轮的旋转自由度独立,而且两轮的横移和摇头也解耦。文章通过建立无公用轴独立旋转车轮转向架车辆在直线上的横向动力学客车模型,模拟实际线路,利用新型数值快速积分法进行动态仿真,得出无公用轴独立旋转车轮转向架车辆的动态响应值,并与具有相同悬挂参数的传统客车进行比较。