Influence of polygonal wear of railway wheels on the wheel set axle stress

The coupled vehicle/track dynamic model with the flexible wheel set was developed to investigate the effects of polygonal wear on the dynamic stresses of the wheel set axle. In the model, the railway vehicle was modelled by the rigid multibody dynamics. The wheel set was established by the finite element method to analyse the high-frequency oscillation and dynamic stress of wheel set axle induced by the polygonal wear based on the modal stress recovery method. The slab track model was taken into account in which the rail was described by the Timoshenko beam and the three-dimensional solid finite element was employed to establish the concrete slab. Furthermore, the modal superposition method was adopted to calculate the dynamic response of the track. The wheel/rail normal forces and the tangent forces were, respectively, determined by the Hertz nonlinear contact theory and the Shen–Hedrick–Elkins model. Using the coupled vehicle/track dynamic model, the dynamic stresses of wheel set axle with consideration of the ideal polygonal wear and measured polygonal wear were investigated. The results show that the amplitude of wheel/rail normal forces and the dynamic stress of wheel set axle increase as the vehicle speeds rise. Moreover, the impact loads induced by the polygonal wear could excite the resonance of wheel set axle. In the resonance region, the amplitude of the dynamic stress for the wheel set axle would increase considerably comparing with the normal conditions.     

基于秩约束的车辆遮挡点恢复方法

为了恢复车辆跟踪过程中丢失的特征点,提出了一种基于秩约束的车辆遮挡点恢复方法,该方法利用所有车辆图像点组成一个秩3的矩阵,并利用该特性构造一个投影矩阵,利用该投影矩阵求到车辆遮挡点,再将求到的车辆遮挡点代替图像中的车辆遮挡点,经过多次迭代,最后求到车辆遮挡点的真实位置。该方法的优点是所有的图像及图像点都平等地看待,模拟试验和真实试验表明,该方法具有鲁棒性好、收敛性好及误差小等优点。     

Prediction of fatigue life and estimation of its reliability on the parts of an air suspension system

Air suspension systems have been implemented in various commercial vehicles, such as buses and special purpose trucks, because of the comfortable ride and easy height control. An evaluation of the durability of vehicle parts has been required for service life and safety starting in the early stages of design. The cyclic load applied to the vehicle can cause fatigue failure of parts, such as the suspension frame. This paper presents a method to predict the fatigue life of the suspension frame at the design stage of the air suspension system used in a heavy-duty vehicle. To estimate the fatigue life using the SN method, the Dynamic Stress Time History (DSTH) is necessary for the part of interest. DSTH can be obtained from the results of the flexible body dynamic analysis using the Belgian road simulation and the Modal Stress Recovery (MSR) method. Furthermore, the reliability of the predicted fatigue life can be evaluated by considering the variations in material properties. The probability and distribution of the expected life cycle can be obtained using experimental design with a minimum number of simulations. The advantage of using statistical methods to evaluate the life cycle is the ability to predict replacement time and the probability of failure of mass-produced parts. This paper proposes a rapid and simple method that can be effectively applied to the design of vehicle parts.     

基于自适应插值的符号定时恢复算法

在分析插值滤波器和均衡器的基础上,讨论了一种自适应插值的定时恢复算法,并进行了仿真.仿真结果表明,这一方法优于拉格朗日插值算法和LMS均衡算法.该算法在完成了对定时误差的插值运算的同时,也消除了衰落引起的码间干扰,性能良好.     

AUV水下回收过程中的操纵性仿真研究

在建立自主水下航行器(简称 AUV)六自由度运动模型的基础上,基于势流理论建立了潜艇运动扰动流场对 AUV 扰动力的计算模型,并对回转体 AUV 在回收时靠近潜艇过程中的操纵性进行了仿真,仿真结果显示,AUV 在靠近潜艇的过程中,潜艇扰动流场对 AUV 深度和侧向位移有较大的影响,而对姿态角的影响较小,因此,回转体 AUV 可以稳定地完成水下的回收运动。     

自适应信号控制下交叉口延误计算方法研究

为了研究交通信号的自适应控制方法,需要对交叉口延误进行定量的分析与计算。本文根据信号交叉口理论,在以往定时信号延误研究的基础上,基于交叉口一个进口方向的车辆延误分析,推导了信号控制交叉口不同交通运行状况下的交叉口延误公式;进而对自适应信号控制下交叉口延误的计算方法进行了研究,提出了自适应信号控制下交叉口延误的计算方法———根据交叉口各进口方向不同的交通运行状况以及所处的相序选择相应的公式计算交叉口各进口方向的车辆延误,然后对其求和,得到交叉口延误。     

电子确报信息的管理和应用

介绍了列车自动识别系统(ATIS)统计复示系统的快速恢复方法.加强对电子确报信息的管理,可使ATIS信息的应用得到深化.     

含银废弃物中贵金属银综合回收工艺研究进展

贵金属银因具有优异的理化性质,被广泛地应用于工业催化、电子电镀、感光材料等领域。本文综述了含银废弃物中银综合回收工艺的研究现状,分析了火法和湿法回收技术的原理和工艺,介绍了工业上银的溶解方法和还原方法,比较了不同方法的优缺点,并结合工业实例论述了从废银基催化剂、电子废弃物和含银废液中回收银的工艺流程,最后对含银废弃物中银综合回收的前景进行了展望。     

大功率整流器换流问题研究

理论上分析了大功率整流电路换流过渡过程，分析了换流过电压、关断功率与阻尼电路参数间的相互关系，提出换流过电压和关断功率的计算方法与计算公式，进一步探讨了如何合理配置阻尼保护电路参数。特别指出在大电流瞬时关断功率比换流过电压具有更大的危害性。为消除元件在换流过程中的关断损坏，还推荐一种改进型整流电路。