Local joint flexibility of tubular X-joints stiffened with external ring or external plates

In the present paper, the Local Joint Flexibility (LJF) of the ring-stiffened X-joints and plate-stiffened X-joints under compressive load is investigated. In the first phase, a finite element (FE) model was generated and verified with the results of available experimental tests and equations. In the next phase, a set number of 234 FE models were created to evaluate the role of the external ring size (β_r and τ_r), the external plate size (β_p and τ_p), and the connection geometry (γ, τ, and β) on the LJF factor (f_LJF). In these FE models, the weld connecting the chord and brace members was generated. The results indicated that the f_LJF of a plate stiffened joint can be down to 76% of the f_LJF of the corresponding un-stiffened joint. Also, the effect of the ring size on the f_LJF was more than the effect of the plate size on the f_LJF, because of the stiffener position. Despite the notable effect of the ring and the plate on the f_LJF, there is not any study or formula on tubular connections stiffened with ring or plate. Therefore, the FE results were used to propose two parametric formulas for determining the f_LJF in X-joints with external ring or external plate under brace compressive load. Moreover, the derived formulas were checked based on the UK DoE acceptance criteria.     

Optimal joint distance and time toll for cordon-based congestion pricing

This paper addresses the optimal toll design problem for the cordon-based congestion pricing scheme, where both a time-toll and a nonlinear distance-toll (i.e., joint distance and time toll) are levied for each network user’s trip in a pricing cordon. The users’ route choice behaviour is assumed to follow the Logit-based stochastic user equilibrium (SUE). We first propose a link-based convex programming model for the Logit-based SUE problem with a joint distance and time toll pattern. A mathematical program with equilibrium constraints (MPEC) is developed to formulate the optimal joint distance and time toll design problem. The developed MPEC model is equivalently transformed into a semi-infinite programming (SIP) model. A global optimization method named Incremental Constraint Method (ICM) is designed for solving the SIP model. Finally, two numerical examples are used to assess the proposed methodology.     

三边长后方交会在精密测量工程中的应用

文章以广西贵港西江航运建设二期工程船闸安全监测项目为例,介绍了三边长后方交会法的基本原理,推导出三边长后方交会法的坐标计算、平差公式等,分析了其误差来源和控制措施,论证了三边长后方交会在精密测量工程中的可行性与优越性。     

上海市道路隧道结构设计标准综述

通过调研和总结上海已建15座盾构隧道的设计资料,对现有隧道存在的病害进行了归类分析,提出了隧道病害的预防与治理措施;对明挖段的围护设计选型、结构工程规模和盾构隧道几何设计参数进行了统计分析,提出了明挖接线段围护结构选型及插入比的建议,明确了明挖结构的计算模型和计算参数;对已建盾构隧道的埋深、最小曲线半径、最小线间距、最大坡度等几何参数进行了详细分析,总结出了工作井平面尺寸的确定方法和盾构进出洞的关键技术。     

Travel time estimation oriented freeway sensor placement problem considering sensor failure

Optimal sensor placement on freeway corridor is of great interest to transportation authorities. However, current traffic sensors are easily subject to various failures. Therefore, it is necessary to incorporate sensor failure into the optimal sensor placement model. In this article, a two-stage stochastic model is proposed for the purpose of travel time estimation on freeway corridor. To balance the effectiveness and reliability, a stochastic conditional value at risk (CVaR) model is also proposed. Since both models are too complicated, a customized genetic algorithm is developed. Numerical experiments show that considering sensor failure makes a significant performance improvement in the sensor placement pattern. Sensitivity analysis is also applied to investigate the impact of a number of allowable sensors and different traffic sensor failure probability.     

高速公路低路基设计探讨

从高速公路采用低路基设计的必要性、可行性及采取相应措施几方面进行探讨,从而达到节约土地资源这一关系整个国民经济发展和社会稳定的重大战略问题。     

现浇预应力混凝土连续箱梁桥设计

结合某主线上一座2×30 m现浇连续预应力混凝土葙梁桥的工程实例,较详尽的介绍了该桥的设计和构造特点、上部结构计算及上下部构造设计,并结合实际针对设计时应考虑的一些因素进行了较详细的探讨.     

浅谈工程设计对公路建设投资的影响和相应对策

通过工程设计对公路建设投资影响的分析,阐明了工程设计是影响建设投资的主要因素之一,并通过实例证明了合理选择设计方案和采用技术标准等办法是控制投资的一条有效途径,而合理选择设计方案和技术标准又受到各种因素的影响和限制,对影响合理选择设计方案的原因进行了具体分析,并就此提出了几点相应对策,供同行们参考.     

山区高速公路涵洞设计施工问题的探讨

对朝赤高速公路涵洞设计及施工过程中的一些关键技术问题进行探讨.     

强夯置换法处理滨海公路软土路基

结合辽宁省滨海公路庄河市大张至中隈段的土质情况,阐述了强夯处理软土地基的设计方法、施工过程及处理后的地基效果.