电控燃油喷射用高速电磁阀驱动方式研究

对柴油机电控系统脉冲电磁阀的快速响应性进行了分析，从电磁铁结构设计和电路驱动技术两个方面进行了对比，提出并设计了一种基于充电泵的升压驱动电路。实验结果表明，这种驱动电路可以大大缩短电磁阀的响应时间。     

Real-world gaseous and particle emissions of a Bi-fuel gasoline/CNG Euro 6 passenger car

The objective of the present study is the assessment of the environmental impact of a bivalent (bi-fuel) vehicle, running either on gasoline or compressed natural gas (CNG). To that aim, a Euro 6 passenger car was tested under various real-world driving conditions. In order to cover the full range of conventional powertrains currently in the market, the tests were also repeated on a Euro 6 diesel passenger car. Both cars were driven in two routes, the first complying with the regulation limits and the second going beyond them. Carbon monoxide (CO), nitrogen oxides (NO_x) and particle number (PN) emissions were recorded using a Portable Emissions Measurement System (PEMS). Apart from the aggregated emission levels, in g/km, the exact emission location along the route was also assessed. Natural gas proved beneficial for CO and PN emissions, the level of which always remained below the respective legislation limits. On the other hand, under the dynamic driving conditions with gasoline, the relevant limits were exceeded. Cold start, occurring at the beginning of the urban part, and motorway driving were identified as major contributors to total emissions, especially in gasoline mode. However, the application of natural gas was associated with a penalty in NO_x emissions, which were significantly increased as compared to gasoline. Local peaks within the urban part were identified in CNG mode. In any case, the diesel vehicle was by far the highest NO_x emitter.     

Estimation of driving style in naturalistic highway traffic using maneuver transition probabilities

Accurately estimating driving styles is crucial to designing useful driver assistance systems and vehicle control systems for autonomous driving that match how people drive. This paper presents a novel way to identify driving style not in terms of the durations or frequencies of individual maneuver states, but rather the transition patterns between them to see how they are interrelated. Driving behavior in highway traffic was categorized into 12 maneuver states, based on which 144 (12 × 12) maneuver transition probabilities were obtained. A conditional likelihood maximization method was employed to extract typical maneuver transition patterns that could represent driving style strategies, from the 144 probabilities. Random forest algorithm was adopted to classify driving styles using the selected features. Results showed that transitions concerning five maneuver states – free driving, approaching, near following, constrained left and right lane changes – could be used to classify driving style reliably. Comparisons with traditional methods were presented and discussed in detail to show that transition probabilities between maneuvers were better at predicting driving style than traditional maneuver frequencies in behavioral analysis.     

驱动桥壳有限元分析模型的改进

针对目前常用的驱动桥壳有限元分析模型中由于边界条件定义造成结果不准确的问题,在分析模型中引入了板簧的弹性特征,并按不同的边界条件对桥壳应力分布进行了计算。结果表明,按照传统约束方式计算,板簧座外侧桥壳应力高,板簧座内侧桥壳应力位于低;按新建立的边界条件计算,则高应力区将向板簧座内侧的桥壳扩展。测得弯曲及扭转工况下桥壳的应力结果表明,采用常用边界条件所得位于板簧座内侧的桥壳应力计算结果与实际相差接近50%;引入板簧元件后桥壳应力的计算结果则与试验结果相近。     

Handling qualities evaluation method based on actual driver characteristics

The present study proposes an objective handling qualities evaluation method using driver-in-the-loop analysis. The driving simulator experiments were performed for various driving conditions, drivers and vehicle dynamics. The response characteristics of the driver model and the closed-loop system were analyzed. The analysis revealed the driving strategies clearly, indicating the importance of closed-loop analysis. Using the identified driver model and its strategies, a cost function of the handling qualities was constructed. The cost function can be used to estimate the handling qualities analytically from the vehicle dynamics. The proposed method was validated by comparison with the handling qualities evaluation rated by the driver's comments.     

International benchmarking of longitudinal train dynamics simulators: results

This paper presents the results of the International Benchmarking of Longitudinal Train Dynamics Simulators which involved participation of nine simulators (TABLDSS, UM, CRE-LTS, TDEAS, PoliTo, TsDyn, CARS, BODYSIM and VOCO) from six countries. Longitudinal train dynamics results and computing time of four simulation cases are presented and compared. The results show that all simulators had basic agreement in simulations of locomotive forces, resistance forces and track gradients. The major differences among different simulators lie in the draft gear models. TABLDSS, UM, CRE-LTS, TDEAS, TsDyn and CARS had general agreement in terms of the in-train forces; minor differences exist as reflections of draft gear model variations. In-train force oscillations were observed in VOCO due to the introduction of wheel–rail contact. In-train force instabilities were sometimes observed in PoliTo and BODYSIM due to the velocity controlled transitional characteristics which could have generated unreasonable transitional stiffness. Regarding computing time per train operational second, the following list is in order of increasing computing speed: VOCO, TsDyn, PoliTO, CARS, BODYSIM, UM, TDEAS, CRE-LTS and TABLDSS (fastest); all simulators except VOCO, TsDyn and PoliTo achieved faster speeds than real-time simulations. Similarly, regarding computing time per integration step, the computing speeds in order are: CRE-LTS, VOCO, CARS, TsDyn, UM, TABLDSS and TDEAS (fastest).     

运用盾构掘进参数跟踪判断滚刀损坏的研究

目前盾构滚刀磨损的判断通常是经验性的。文章在文献[6]运用盾构掘进参数判断刀具损坏的分析计算方法基础上,进一步考虑了土舱压力的影响,对掘进速度和刀盘扭矩计算模型进行了修正;依托具体工程实例,运用修正计算模型分别对土压平衡盾构、泥水平衡盾构以及TBM等在硬岩中的掘进数据与滚刀情况进行了跟踪判别研究。结果表明,计算结果与滚刀磨损情况比较吻合,该方法对判断滚刀损坏具有可行性、参考性。     

地道桥引道纵断设计浅析

结合工程实例,论述了地道桥引道纵断设计时,如何合理确定竖曲线的最小半径和最小长度,从而保证汽车的行车安全。     

Self- and peer-assessments of ambulance drivers' driving performance

The aim of the present study was to develop and examine the quality of the Ambulance Driver Self-assessment Questionnaire (ADSQ) and the Ambulance Driver Peer-assessment Questionnaire (ADPQ) measuring aspects of, driving performance, driving style and driving competence. In addition the ADSQ measures self-reflection and safety-attitudes. The aim of the study was also to examine ambulance drivers' self- and peer-assessments as well as to examine the accuracy of self-assessments by comparing self-assessed and peer-assessed driving performance, driving style and competence. 76 ambulance drivers employed at two ambulance stations in northern Sweden completed ADSQ and ADPQ. Item analyses were conducted to examine the psychometric properties of the items, and based on the results some revisions were made to improve the questionnaires. The revised questionnaires were functioning rather well, although some subscale demonstrated low internal consistency. Subscale inter-correlations provided support for construct validity. Self- and peer-assessments indicated safe driving performance and good driver competence, which is positive from a traffic safety perspective. A comparison of mean self- and peer-assessment ratings, controlling for age, gender and driving experience showed no significant differences, except for the subscale overtaking. This indicates that ambulance drivers' self-assessments are realistic in most areas.     

运行图在多模拟器追踪仿真中的应用研究

本文介绍借助ADO技术建立VC++与SQL Server的通信,通过分析列车时刻表的构成,使用相关算法自动快速生成列车时刻表,并画出相应的列车计划运行图的方法.同时对列车运行图在多模拟驾驶器追踪仿真中的运用也进行了介绍.