Model Test on Grouting Law in Dynamic Water-Rich Sand Layers by the Electric Resistance Method北大核心CSCD

In order to study the diffusion law of grouting slurry in the water-rich sand layer under flowing water conditions, a grouting test model consisting of a main test system, a grouting system, and a measurement system was developed. And for detecting the diffusion scope of the grouts, a new resistivity method was proposed. It is found that the relationship between grouting pressure and grouting rate during the test is strong. Under hydrodynamic conditions, the grouting slurry diffuses elliptically. Due to gravity and the effect of the upper water flow, the center of gravity of the ellipsoid is below the grouting outlet, and the grouting effectively improves the physical and mechanical properties of water-rich sand bodies. At the same time, the resistivity method has a good application effect on the detection of grouting diffusion range. The range of slurry diffusion obtained by the resistivity method is basically consistent with the boundary of the stone body after excavation, indicating that the resistivity method is reliable for detection of grouting range in dynamic water-rich sand layer. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Effect of Seismic Parameters on the Safety Factor for an Underground Cavern北大核心CSCD

In order to quantitatively evaluate the safety of the surrounding rock of an underground cavern under seis-mic load, a comprehensive evaluation method for the stability of surrounding rock is proposed based on the general safety factor and point safety factor. A calculation method for the general safety factor of a cavern based on the prin-ciple of shear strength reduction of a rock mass is given, the run-through of the plastic zone between the main power-house and main transformer room is presented as a critical criterion for the overall instability of the cavern, and the general safety factor is obtained by searching for the reduction coefficient. A point safety factor calculation method based on the Mohr-Coulomb yield criterion is given. The influence of different seismic input parameters on the general safety factor of the cavern and the point safety factor of key positions are studied based on an underground power-house cavern of a hydropower station in Southwest China. The results show that the quantitative evaluation method for the stability of the surrounding rock based on the safety factor is feasible and can reflect the general safety de-gree and local safety degree of different positions of the cavern for different working conditions. It is found that the general safety factor of the cavern and the point safety factor of key positions decrease with an increase of the ampli-tude and duration of a seismic wave while they increase with an increase of the incident angle; additionally, the low frequency of a seismic wave has a great influence on the cavern while the high frequency has little effect. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

基于粒子群算法的水下多元线阵阵形有源校正方法

针对存在阵元位置误差的水下多元线阵,提出一种基于粒子群优化算法的远场有源阵形校正方法.该方法选用2个辅助源分时工作方式,利用无条件最大似然方位估计算法构建目标函数,并通过粒子群算法对阵元位置进行寻优.利用该方法对均匀线阵进行性能仿真实验.结果表明:该方法稳健性好、校正精度高,具有一定的应用前景.     

高压齿轮泵浮动侧板的动态平衡机理

针对高压齿轮泵浮动侧板磨损问题,在解析齿轮泵内部流场的基础上重点研究了浮动侧板反推力作用点变化规律和导致侧板产生倾覆力矩的关键因素。以某型号高压大排量齿轮泵为模型,运用CFD软件解析齿轮泵内部流场并根据侧板结构特点建立压紧力和反推力的求解微分方程,求得一个轮齿啮合周期内的侧板倾覆力矩变化规律,同时通过建立齿轮泵工作腔压力测试系统对该理论分析结果进行验证,额定工况下：试验值与理论值误差为4.18%,当轮齿转角φ=14°时倾覆力矩达到最大值Ms=82.16N?m。该研究为高压大排量齿轮泵浮动侧板倾覆力矩计算和侧板结构优化设计提供了理论基础和技术支撑。     

路基土动态模量试验研究

采用UTM-100动态伺服液压材料试验系统,对路基土进行室内三轴重复加载试验,测试路基土动态回弹模量,分析了含水量、侧向应力、偏应力对回弹模量的影响关系,为制定路基土动态回弹模量的测试方法和取值标准提供了参考.     

高模量沥青混合料的动态模量试验研究

高模量沥青混合料是通过在基质沥青中添加调和硬组分从而提高其模量的。实验对混合料进行了配合比设计,并对其与其它几种混合料在不同温度、不同加载频率条件下进行动态模量对比试验研究。结果显示高模量沥青混合料可以在不降低混合料低温性能的同时,有效提高其高温稳定性,抑制和减少车辙的产生,从而保证道路的良好使用性能。     

通过三峡升船机的船舶排水量校验技术

受三峡升船机船厢结构强度的限制以及防止船舶发生触底,通过升船机的船舶排水量不能超过3 000 t,但目前行业内暂无相应的船舶排水量快速校验方法。通过分析不同类型船舶三维尺度与排水量的对应关系,以船舶方形系数为关键点,得出快速计算船舶总排水量的经验公式,并通过实例验证,从而提出校验三峡过坝船舶排水量的校验方法。结果表明,船舶排水量计算经验公式精度符合要求,提出的校验方法快速、准确。     

“海洋石油201”深水起重铺管船动力定位系统设备配置研究

深水起重铺管船是深水油气资源开发的重要装备,其定位系统是起重铺管船的关键设备之一.本文对海洋工程装备动力定位系统的配置选型做了分析研究,并结合分析结果介绍了我国首艘深水起重铺管船“海洋石油201”的动力定位系统设备配置情况.     

怀邵衡铁路沅江特大桥主桥设计

怀邵衡铁路沅江特大桥主桥为矮塔斜拉加劲连续梁组合结构,跨径为(90+180+90)m,采用塔、梁固结体系,综述该桥上部结构设计与计算。主梁采用单箱单室变截面混凝土箱梁;桥塔采用双柱式桥塔,塔高28 m;斜拉索为空间双索面体系,扇形布置。采用MIDAS Civil2006及BDAP程序对该桥进行结构计算分析,结果表明:该桥静力、稳定及动力特性均满足要求。     

设计模式在对准数据采集处理系统中的应用

对准数据采集处理系统作为丰富动态条件下舰载系统对准检测手段的一次尝试,必须具备高度可复用性和灵活性．支持基于该系统软件进行的扩充和再开发。设计模式代表了成功的可复用的优秀设计经验,在系统设计中引人设计模式将有效的提高系统的可扩展性和可维护性。文章在对准数据采集处理系统中引入了设计模式,介绍了设计模式的概念及使用,并结合该系统软件的开发流程中设计模式的应用实践,阐述了基于设计模式的对准数据采集处理系统的优点及特点。