桨-舵间距对其组合系统水动力性能的影响

本文通过CFD方法对敞水桨、桨-舵组合以及优化间距的桨-舵组合装置开展了数值仿真研究，分析了桨-舵间距对其组合系统的水动力性能影响。螺旋桨敞水工况的计算值与物理模型试验值吻合良好，验证了数值计算方法的可行性。通过对比桨-舵间距大于推荐值的三个工况，发现在较低进阶系数下系统的节能效率有稍许增加，然而随着间距的增大，节能效率呈现降低的趋势；在高进阶系数下，随间距增大节能效率逐步降低。适当减小桨-舵间距，在较低和中等进阶系数下，随间距减小节能效率呈现逐步升高的趋势，在间距减少10mm时，组合体的节能效率最大可增加1.937%；不过在高进阶系数下，随间距减小节能效率却有下降趋势。     

A driver advisory system with dynamic losses for passenger electric multiple units

Driver advisory systems, instructing the driver how to control the train in an energy efficient manner, is one the main tools for minimizing energy consumption in the railway sector. There are many driver advisory systems already available in the market, together with significant literature on the mathematical formulation of the problem. However, much less is published on the development of such mathematical formulations, their implementation in real systems, and on the empirical data from their deployment. Moreover, nearly all the designed driver advisory systems are designed as an additional hardware to be added in drivers’ cabin. This paper discusses the design of a mathematical formulation and optimization approach for such a system, together with its implementation into an Android-based prototype, the results from on-board practical experiments, and experiences from the implementation. The system is based on a more realistic train model where energy calculations take into account dynamic losses in different components of the propulsion system, contrary to previous approaches. The experimental evaluation shows a significant increase in accuracy, as compared to a previous approach. Tests on a double-track section of the Mälaren line in Sweden demonstrates a significant potential for energy saving.     

Urban single-lane roundabouts: A new analytical approach using multi-criteria and simultaneous multi-objective optimization of geometry design,efficiency and safety

Building safe and effective roundabouts requires optimizing traffic (operational) efficiency (TE) and traffic safety (TS) while taking into account geometric factors, traffic characteristics and local constraints. Most existing simulation-based optimization models do not simultaneously optimize all these factors. To capture the relationship among geometry, efficiency and safety, we put forward a model formulation in this paper. We present a new multi-criteria and simultaneous multi-objective optimization (MOO) model approach to optimize geometry, TE and TS of urban unsignalized single-lane roundabouts. To the best of our knowledge, this is the first model that uses the multi-criteria decision-making method known as analytic hierarchy process to evaluate and rank traffic parameters and geometric elements of urban single-lane roundabouts. The model was built based on comprehensive review of the research literature and existing roundabout simulation software, a field survey of 61 civil and traffic expert engineers in Croatia, and field studies of roundabouts in the Croatian capital city of Zagreb. We started from the basis of Kimber’s capacity model, HCM2010 serviceability model, and Maycock and Hall's accident prediction model, which we extended by adding sensitivity analysis and powerful MOO procedures of the bounded objective function method and interactive optimization. Preliminary validation of the model was achieved by identifying the optimal and most robust of three geometric alternatives (V.1-V.3) for an unsignalized single-lane roundabout in Zagreb, Croatia. The geometric parameters in variant V.1 had significantly higher values than in the existing design V.0, while approaches 1 and 3 in variant V.2 were enlarged as much as possible within allowed spatial limits and Croatian guidelines, reflecting their higher traffic demand. Sensitivity analysis indicated that variant V.2 showed the overall highest TE and TS across the entire range of traffic flow demand and pedestrian crossing flow demand at approaches. At the same time, the number of predicted traffic accidents was similar for all three variants, although it was lowest overall for V.2. The similarity in predicted accident frequency for the three variants suggests that V.2 provides the greatest safety within the predefined constraints and parameter ranges explored in our study. These preliminary results suggest that the proposed model can optimize geometry, TE and TS of urban single-lane roundabouts.     

LED灯具在高速列车照明系统中的应用

随着我国高速铁路事业的发展,旅客对车内照明环境品质的要求越来越高,在我国高速列车照明设计中广泛采用LED灯具作为光源。通过对高速动车组车载灯具与25T型列车传统车载灯具的测试对比,总结出LED灯具在发光效率等方面相对于传统灯具的优势,为高速动车组室内照明设计提供依据。     

Integrated vehicle and powertrain optimization for passenger vehicles with vehicle-infrastructure communication

This research proposes an optimal controller to improve fuel efficiency for a vehicle equipped with automatic transmission traveling on rolling terrain without the presence of a close preceding vehicle. Vehicle acceleration and transmission gear position are optimized simultaneously to achieve a better fuel efficiency. This research leverages the emerging Connected Vehicle technology and utilizes present and future information—such as real-time dynamic speed limit, vehicle speed, location and road topography—as optimization input. The optimal control is obtained using the Relaxed Pontryagin’s Minimum Principle. The benefit of the proposed optimal controller is significant compared to the regular cruise control and other eco-drive systems. It varies with the hill length, grade, and the number of available gear positions. It ranges from an increased fuel saving of 18–28% for vehicles with four-speed transmission and 25–45% for vehicles with six-speed transmission. The computational time for the optimization is 1.0–2.1 s for the four-speed vehicle and 1.8–3.9 s for the six-speed vehicle, given a 50 s optimization time horizon and 0.1 s time step. The proposed controller can potentially be used in real-time.     

区域道路运输相对效率截面分析

随着区域路网的完善,其承载的道路运输业也呈现快速发展态势。在区域层面上,实现两者的良性互动,需要因地制宜,实现区域与运输业阶段性的协调决策,进而保证在全社会范围内对优化资源配置。这些分析的实现需要合适的评价方法对道路运输业投入要素与产出要素间的内在关系进行深入研究,并能对投入、产出要素进行量化控制。本文引入数据包络分析方法（Data Envelopment Analyses,简称DEA方法）,采用CCR模型（Charnes,Cooper and Rhodes Model）以各区域道路运输为决策单元;构筑各区域道路运输生产前沿面,评价各单元的相对效率,分析各要素投入的变动对产出的影响。     

基于LabVIEW的“海院1号”波浪发电平台浮筒取能效率数据采集系统设计

浮筒取能效率测试是波浪发电平台研究的重要组成部分。传统的测试系统不但测量精度低,而且自动化程度低、操作复杂。为此,该文基于“海院1号”波浪发电平台,采用虚拟仪器LabVIEW软件开发了浮筒取能效率数据采集系统。文中介绍了“海院1号”波浪发电平台及其浮筒,进行了测试系统的设计,实现了浮筒取能效率测试的数据采集、数据管理、曲线拟合及绘制、生成报表、信号分析以及数据处理等工程。对实际运行效果进行分析,结果表明该系统具有精度高、运行稳定可靠、自动化程度高、人机界面友好以及操作简单等特点,具有重要的工程实践意义。     

焊装车间机器人的节拍分析及优化设计

为了实现焊装车间降本增效的目标,对焊装车间自动生产线上机器人的生产节拍进行优化.通过分析机器人的工作时序逻辑,查找机器人不合理的工作时序,进而分析机器人的底层程序,修改程序上的问题,优化工作时序,消除机器人工作时序逻辑不合理产生的等待浪费,提升生产线的生产节拍,从而提高车间的生产效率,最终实现降本增效的目标.     

Can ports increase traffic while reducing inputs? Technical efficiency of Spanish Port Authorities using a directional distance function approach

The focus of this paper is on the productive efficiency of ports. We estimate a directional technology distance function using parametric techniques to analyze the production technology and technical efficiency of a set of Spanish Port Authorities observed over the period 1993–2012. Technical inefficiency is conceived as the ability of ports to simultaneously expand a given output and contract variable inputs while maintaining quasi-fixed inputs and other outputs constant. Thus, for containerized cargo we address the following question: Given the amount of quasi-fixed inputs used by the firm and given the volume of the other outputs (liquids, solids, non-containerized cargo and passenger traffic), could ports increase their containerized merchandise while simultaneously reducing their variable inputs? Similar questions are asked for solid bulk and non-containerized general cargo. Our results show evidence of technical inefficiency among the ports in our sample. In particular, if the ports operated efficiently, we find that containerized cargo could be expanded by an average of over 6.4%, with an equivalent reduction in variable inputs. Solid bulk cargo and general non-containerized cargo could be increased by 4.1% and 6.1% respectively, with corresponding reductions in variable inputs. An implication of our results is that there is ample scope for specialization on the part of ports with no increase in infrastructure costs. Given that large investments in infrastructure have been made in Spanish port over the last decade, this opens the possibility of moving towards a management model based on taking advantage of existing capacity rather than new investments.