PHEV能量管理策略研究

针对一款串联型插电式混合动力公交车,文章基于MTLALB建立整车和各部件数值模型。在中国典型城市公交工况下,建立基于全局优化的DP策略,并与CD-CS策略和PMP策略进行能耗对比分析。结果表明:(1)基于CD-CS策略的后期SOC在一定范围内波动,DP策略与PMP策略的SOC轨迹近似呈线性变化。(2)CD-CS策略较DP策略的能耗成本高22.68%,PMP策略比DP策略的能耗成本高0.30%。DP策略与PMP策略可以合理分配能量源,实现全局最优,但DP策略相比PMP策略计算量大。     

新能源汽车高压连接器可靠性研究

近几年,随着国家倡导绿色发展,新能源汽车产业发展迅速,我国新能源汽车保有量的快速增长,新能源汽车安全问题愈发得到人们的重视。要保证汽车在任何环境和条件下都能正常运行,这对汽车所有零部件的质量和性能提出了更高的要求,新能源汽车高压连接系统中,往往都应用大量了高压连接器,每一辆新能源电动汽车上所使用电连接器数量将达到600~1500只,故连接器对整个新能源汽车的质量保证起着举足轻重的作用。连接器一旦失效,后果十分严重,汽车温度局部升高或发生燃烧事件,甚至出现交通意外。本文从新能源汽车用的高压连接器发展现状及趋势基础上,对高压连接器的失效分析和性能指标做了概述,为后续研究提供理论基础。     

A new time-frequency analysis method based on single mode function decomposition for offshore wind turbines

The Hilbert-Huang transform (HHT) has been widely applied and recognised as a powerful time-frequency analysis method for nonlinear and non-stationary signals in numerous engineering fields. One of its major challenges is that the HHT is frequently subject to mode mixing in the processing of practical signals such as those of offshore wind turbines, as the frequencies of offshore wind turbines are typically close and contaminated by noise. To address this issue, this paper proposes a new time-frequency analysis method based on single mode function (SMF) decomposition to overcome the mode mixing problem in the structural health monitoring (SHM) of offshore wind turbines. In this approach, the structural vibration signal is first decomposed into a set of window components using complex exponential decomposition. A state-space model is introduced in the signal decomposition to improve the numerical stability of the decomposition, and then a novel window-alignment strategy, named energy gridding, is proposed and the signals are constructed in the corresponding gridding. Furthermore, energy recollection is implemented in each gridding, and the reassembling of these components yields an SMF that is comparable to the intrinsic mode function (IMF) of the HHT, but with a significant improvement in terms of mode mixing. Four case studies are conducted to evaluate the performance of the proposed method. The first case attempts to detect three different frequencies in a simulated time-invariant signal. The second case attempts to test a synthesised signal with segmental time-varying frequencies (each segment contains three different frequencies components). The analysis results in these two cases indicate that mode mixing can be reduced by the proposed method. Furthermore, a synthesised signal with slowly varying frequencies is used. These analysis results demonstrate the effective suppression of non-relevant frequency components using SMF decomposition. In the third case, the experimental data from vortex-induced vibration (VIV) experiments sponsored by the Norwegian Deepwater Programme (NDP) are used to evaluate the proposed SMF decomposition for vibration mode identification. In the final case, field data acquired from an offshore wind turbine foundation and offshore wind turbine are analysed. The mode identification results obtained using SMF decomposition are compared with those produced by the HHT. The comparison demonstrates superior performance of the proposed method in identifying the vibration modes of the VIV experimental and field data.     

Development a new power management strategy for power split hybrid electric vehicles

Reduction of greenhouse gas emission and fuel consumption as one of the main goals of automotive industry leading to the development hybrid vehicles. The objective of this paper is to investigate the energy management system and control strategies effect on fuel consumption, air pollution and performance of hybrid vehicles in various driving cycles. In order to simulate the hybrid vehicle, the combined feedback–feedforward architecture of the power-split hybrid electric vehicle based on Toyota Prius configuration is modeled, together with necessary dynamic features of subsystem or components in ADVISOR. Multi input fuzzy logic controller developed for energy management controller to improve the fuel economy of a power-split hybrid electric vehicle with contrast to conventional Toyota Prius Hybrid rule-based controller. Then, effects of battery’s initial state of charge, driving cycles and road grade investigated on hybrid vehicle performance to evaluate fuel consumption and pollution emissions. The simulation results represent the effectiveness and applicability of the proposed control strategy. Also, results indicate that proposed controller is reduced fuel consumption in real and modal driving cycles about 21% and 6% respectively.     

地铁信号系统节能仿真平台的设计与实现

从信号系统角度研究节能应用,搭建了一套完整的地铁信号系统节能仿真平台,实现在线列车能耗计算和统计,为优化信号系统的节能方案提供依据。为了保证仿真数据的准确性,且具有较强的针对性,该仿真平台采集了某一具体线路、车型、供电区段的数据,并通过现场试验校正仿真数据,以使该仿真平台的输出结果具有较高的可信度。     

Comparative evaluation of resource cycle strategies on operating and environmental impact in container terminals

This paper examines the use of single and dual cycle operations for three types of resources, namely, quay cranes, vehicles, and yard cranes to improve the operating efficiency and reduce the energy consumption in a container terminal. Various cycle strategies are proposed and their corresponding estimation models, describing the stowage distributions of outbound and inbound containers on a ship and the storage sharing level of blocks in the yard, are formulated to estimate the total number of cycles for the resources. Statistical analyses are conducted to evaluate and compare the effect of different cycle strategies on the cycle reductions. From the experiment results, it was found that collaboration between resources with the single cycle operation always outperforms that under the dual cycle operation without collaboration.     

A meta-analysis of Western European external costs estimates

This paper analyses the external transport cost estimates that have been found in various European studies. These estimates seem at first glance to be highly dispersed, a fact which raises questions about their reliability. The article offers a list of the possible reasons for discrepancies between the various studies; differences in the specific situations studied, in the type of cost calculated, in the physical laws relating to emissions, in the measurement of values of external costs. It assesses the relative magnitude of each of these causes through a meta-analysis. It turns out that the main differences come from the specificity of the situation under review and the type of cost calculated. In comparison, differences in the laws and in the values methods have a lower importance. The conclusion is that the estimates of external costs are reliable for decision-making policies.     

二次进气预膨胀涡轮增压系统

文中介绍了二次进气预膨胀涡轮增压系统，该系统能降低燃油消耗率、机械负荷和热负荷，曾在6PA6L280柴油机上进行了性能模拟及试验研究，试验结果与理论预测很一致。若涡轮增压器总效率大于65％时，该系统能回收剩余废气功而不用动力涡轮，在结构上也大大简化，可减少不用动力涡轮系统的附加投资。为了验证这一特性，对6MANL58／64柴油机进行了模拟计算，与一般增压系统比较，结果令人鼓舞。     

爆炸载荷作用下舰船板架的变形与破损

本文用能量法推导了一个计算爆炸载荷作用下舰船板架塑性变形及破损的公式，考虑了大变形时的应变关系及中面膜力的影响，并对国内外的有关试验进行了计算比较，结果表明此公式具有一定的应用价值。     

一种可在线调整的列车正点运行节能操纵控制算法

在给定列车站间运行时分的前提下,以能耗和时间成本最小为优化目标,以列车牵引力、制动力和速度为约束函数,建立基于列车受力特征函数的运动方程.运用动态规划法和二分法,通过回溯计算,建立回溯记录表和调整目标函数价值关系系数,设计列车离线最优节能操纵和正点运行在线调整的控制算法.算例分析以及与基于极大值原理的正点节能方案对比结果表明,给出的算法不仅可以获得与传统算法相似的离线最优节能操纵方案,而且可以对外界干扰做出动态响应,在线调整运行轨迹,在保证正点的前提下控制列车节能运行.