预应力混凝土连续弯梁桥承载能力检测的应用研究

采用车辆加载系统,模拟预应力混凝土连续弯梁在使用阶段的最不利荷载效应,确定试验荷载的最不利位置,通过对试验梁的应力、挠度和裂缝的计算,为评价试验梁的承载能力提供理论依据。     

Wind Generator Stabilization with Doubly-Fed Asynchronous Machine

This paper investigates the function of doubly-fed asynchronous machine(DASM)with emphasis placed on its ability to the stabilization of the power system including wind generators.P(active power)and Q(reactive power)compensation from DASM can be regulated independently through secondary-excitation controlling.Simulation results by power system computer aided design(PSCAD)show that DASM can restore the wind-generator system to a normal operating condition rapidly even following severe transmission-line failures.Comparison studies have also been performed between wind turbine pitch control and proposed method.     

Tool Wear Prediction in Micro-end-milling with Hard Material

The applications of micro-machining have increased drastically in the last ten years. However, tools with less than 1mm diameter using for micro-mills have very short and unpredictable life when they are used to cut hard metals. In this study, preliminary design of experiment (DOE) test program was conducted to investigate and identify the factors affecting tool wear at the micro-scale with hard material. Analysis of variance (ANOVA) and Taguchi method were efficient to determine appropriate cutting condition and the effect of parameters. A simple model was also developed to predict the width of slots on the workpiece along the cutting length. The obtained results can provide the basic guidelines for parameter setting of micro-end-milling with hard material.     

Two Bandwidth Packing Algorithms for the Centralized Wireless Network and Their Average-case Analysis

This paper presents a detail analysis of two bandwidth packing algorithms, used for processing connection requests in the centralized wireless network. Each call comes with a specific bandwidth request. A request can be satisfied only if there is sufficient bandwidth available during resource scheduling and allocation. Unsatisfied requests were held in a queue. The metric of bandwidth utilization ratio was used to quantify the performance of our algorithms. By theoretical analysis, our algorithms can improve the average bandwidth usage ratio significantly, about 8%~10% without adding much computation complexity. Moreover, our algorithms outperform next fit with fragmentation (NFF) algorithm when the bandwidth resource is scarce. In this paper, the contributions follows: Introducing bandwidth packing problem into wireless network; Proposing two new bandwidth packing algorithms for wireless network where the complicate scheduling algorithms are prohibited; Studying the average performance of our algorithms mathematically, which agree well with the simulation results.     

Design Consideration and Reconstruction Method for Double-source Double-multislice Spiral CT

To accelerate the scan speed and improve the image quality, a new type of CT configuration, "double-source double-multislice spiral CT" (DSDMS-CT), which is based on two sets of single-source multislice spiral CT was proposed with a special reconstruction algorithm. Simulation results using the fan-beam filtered backprojection algorithm with a special interpolation method were presented for both single-source multislice spiral CT and DSDMS-CT. The results of new CT model show that it scans faster than the traditional spiral CT and has a better slice sensitivity profile (SSP) with larger pitch value.     

Numerical Simulation Research on Laser Shock Forming of Thin Metal Sheet

Laser shock forming (LSF) of sheet metal is a new technique realized by applying an impulsive pressure generated by laser-induced shock wave on the surface of metal sheet.LSF of brass sheet metal was investigated using a Q-switched Nd:YAG laser with an energy per pulse of 15～50 joules.ABAQUS software was used to simulate laser shock forming process.The central displacement of the shocked region is measured and compared with the simulation.The higher pulse energy, the higher central displacement of the shocked region were obtained.The deformation of the simulation matches the experiment quite well.     

Study and Development of the Biped Ice Skating Robot with Passive Wheels

A new passive wheel type of biped ice-skating robot(BISR)which was able to imitate human skating motion was developed. Firstly, the characteristics of two types of human skating gait were introduced; secondly, after simplifying the kinematical model, the BISR's motion principle was presented; then the construction and control system of BISR were proposed; at last, the skating experiment of the BISR in a symmetric gait mode was conducted and some conclusions were drawn.     

Secure Authentication of WLAN Based on Elliptic Curve Cryptosystem

The security of wireless local area network (WLAN) becomes a bottleneck for its further applications. At present, many standard organizations and manufacturers of WLAN try to solve this problem. However, owing to the serious secure leak in IEEE802.11 standards, it is impossible to utterly solve the problem by simply adding some remedies. Based on the analysis on the security mechanism of WLAN and the latest techniques of WLAN security, a solution to WLAN security was presented. The solution makes preparation for the further combination of WLAN and Internet.     

Development of an Autonomous Flight Control System for Small Size Unmanned Helicopter Based on Dynamical Model

It is devoted to the development of an autonomous flight control system for small size unmanned helicopter based on dynamical model. At first, the mathematical model of a small size helicopter is described. After that simple but effective MTCV control algorithm was proposed. The whole flight control algorithm is composed of two parts: orientation controller based on the model for rotation dynamics and a robust position controller for a double integrator. The MTCV block is also used to achieve translation velocity control. To demonstrate the performance of the presented algorithm, simulation results and results achieved in real flight experiments were presented.     

Investigation of Wall Pressure Fluctuations in a Turbulent Boundary Layer by Large Eddy Simulation

Large eddy simulation (LES) was used to investigate the space-time field of the low Mach number, fully developed turbulent boundary layer on a smooth, rigid flat plate. The wall-pressure field simulated by LES was analyzed to obtain the pressure statistics, including the wall-pressure root-mean square, skewness and flatness factors, which show the wall pressure distribution was not Gaussian. The profile of the auto-power spectral density and the contour of the streamwise wavenumber-frequency spectral density of wall-pressure were plotted. The "convection ridge" can be observed clearly and the convection velocity can be calculated from the location of the convection peak.