An insight into linear quarter car model accuracy

The linear quarter car model is the most widely used suspension system model. A number of authors expressed doubts about the accuracy of the linear quarter car model in predicting the movement of a complex nonlinear suspension system. In this investigation, a quarter car rig, designed to mimic the popular MacPherson strut suspension system, is subject to narrowband excitation at a range of frequencies using a motor driven cam. Linear and nonlinear quarter car simulations of the rig are developed. Both isolated and operational testing techniques are used to characterise the individual suspension system components. Simulations carried out using the linear and nonlinear models are compared to measured data from the suspension test rig at selected excitation frequencies. Results show that the linear quarter car model provides a reasonable approximation of unsprung mass acceleration but significantly overpredicts sprung mass acceleration magnitude. The nonlinear simulation, featuring a trilinear shock absorber model and nonlinear tyre, produces results which are significantly more accurate than linear simulation results. The effect of tyre damping on the nonlinear model is also investigated for narrowband excitation. It is found to reduce the magnitude of unsprung mass acceleration peaks and contribute to an overall improvement in simulation accuracy.     

某出口米轨动车组(Tc车)车体设计及试验对比研究

介绍了使用大型通用计算机辅助工程软件ANSYS和有限元方法,对某出口米轨动车组(Tc车)进行了分析计算的过程,并通过实际物理样机试验数据与计算数据的比对,分析车身强度的可靠性。     

The train platforming problem: The infrastructure management company perspective

If railway companies ask for station capacity numbers, their underlying question is in fact one about the platformability of extra trains. Train platformability depends not only on the infrastructure, buffer times, and the desired departure and arrival times of the trains, but also on route durations, which depend on train speeds and lengths, as well as on conflicts between routes at any given time. We consider all these factors in this paper. We assume a current train set and a future one, where the second is based on the expected traffic increase through the station considered. The platforming problem is about assigning a platform to each train, together with suitable in- and out-routes. Route choices lead to different route durations and imply different in-route-begin and out-route-end times. Our module platforms the maximum possible weighted sum of trains in the current and future train set. The resulting number of trains can be seen as the realistic capacity consumption of the schedule. Our goal function allows for current trains to be preferably allocated to their current platforms.Our module is able to deal with real stations and train sets in a few seconds and has been fully integrated by Infrabel, the Belgian Infrastructure Management Company, in their application called Ocapi, which is now used to platform existing and projected train sets and to determine the capacity consumption.     

Mathematical properties and constraints representation for bottom-up approaches to the evaluation of GHG mitigation policies

Bottom-up models, including MARKAL, MESSAGE and AIM, are widely used when analyzing the effect of greenhouse gas (GHG) abatement policies. These bottom-up models are mostly formulated as a linear programming (LP) optimization model to find both the minimal cost combination of abatement technologies and energy flows while satisfying demands. It is not unusual that the bottom-up modeling involves a great number of technical, industrial, socioeconomic and environmental constraints. Investigating representative constraints needed for analyzing GHG abatement policies, this study proposes how to implement these constraints in bottom-up modeling.     

Vertical random vibration analysis of vehicle–track coupled system using Green's function method

A vertical vehicle–track coupled dynamic model, consisting of a high-speed train on a continuously supported rail, is established in the frequency-domain. The solution is obtained efficiently by use of the Green's function method, which can determine the vibration response over a wide range of frequency without any limitations due to modal truncation. Moreover, real track irregularity spectra can be used conveniently as input. The effect of the flexibility of both track and car body on the entire vehicle–track coupled dynamic response is investigated. A multi-body model of a vehicle with either rigid or flexible car body is defined running on three kinds of track: a rigid rail, a track stiffness model and a Timoshenko beam model. The results show that neglecting the track flexibility leads to an overestimation of both the contact force and the whole vehicle vibration response. The car body flexibility affects the ride quality of the vehicle and the coupling through the track and can be significant in certain frequency ranges. Finally, the effect of railpad and ballast stiffness on the vehicle–track coupled vibration is analysed, indicating that the stiffness of the railpad has an influence on the system in a higher frequency range than the ballast.     

Investigation of the effects of sleeper-passing impacts on the high-speed train

The sleeper-passing impact has always been considered negligible in normal conditions, while the experimental data obtained from a High-speed train in a cold weather expressed significant sleeper-passing impacts on the axle box, bogie frame and car body. Therefore, in this study, a vertical coupled vehicle/track dynamic model was developed to investigate the sleeper-passing impacts and its effects on the dynamic performance of the high-speed train. In the model, the dynamic model of vehicle is established with 10 degrees of freedom. The track model is formulated with two rails supported on the discrete supports through the finite element method. The contact forces between the wheel and rail are estimated using the non-linear Hertz contact theory. The parametric studies are conducted to analyse effects of both the vehicle speeds and the discrete support stiffness on the sleeper-passing impacts. The results show that the sleeper-passing impacts become extremely significant with the increased support stiffness of track, especially when the frequencies of sleeper-passing impacts approach to the resonance frequencies of wheel/track system. The damping of primary suspension can effectively lower the magnitude of impacts in the resonance speed ranges, but has little effect on other speed ranges. Finally, a more comprehensively coupled vehicle/track dynamic model integrating with a flexible wheel set is developed to discuss the sleeper-passing-induced flexible vibration of wheel set.     

Speed variation during peak and off-peak hours on urban arterials in Shanghai

Increased speed variation on urban arterials is associated with reductions in both operational performance and safety. Traffic flow, mean speed, traffic control parameters and geometric design features are known to affect speed variation. An exploratory study of the relationships among these variables could provide a foundation for improving the operational and safety performance of urban arterials, however, such a study has been hampered by problems in measuring speeds. The measurement of speed has traditionally been accomplished using spot speed collection methods such as radar, laser and loop detectors. These methods can cover only limited locations, and consequently are not able to capture speed distributions along an entire network, or even throughout any single road segment. In Shanghai, it is possible to acquire the speed distribution of any roadway segment, over any period of interest, by capturing data from Shanghai’s 50,000+ taxis equipped with Global Positional Systems (GPS). These data, hereafter called Floating Car Data, were used to calculate mean speed and speed variation on 234 road segments from eight urban arterials in downtown Shanghai. Hierarchical models with random variables were developed to account for spatial correlations among segments within each arterial and heterogeneities among arterials. Considering that traffic demand changes throughout the day, AM peak, Noon off-peak, and PM peak hours were studied separately. Results showed that increases in number of lanes and number of access points, the presence of bus stops and increases in mean speed were all associated with increased speed variation, and that increases in traffic volume and traffic signal green times were associated with reduced speed variation. These findings can be used by engineers to minimize speed differences during the road network planning stage and continuing through the traffic management phase.     

A mathematical programming technique for matching time-stamped records in logistics and transportation systems

Time-stamped data for transportation and logistics are essential for estimating times on transportation legs and times between successive stages in logistic processes. Often these data are subject to recording errors and omissions. Matches must then be inferred from the time stamps alone because identifying keys are unavailable, suppressed to preserve confidentiality, or ambiguous because of missing observations. We present an integer programming (IP) model developed for matching successive events in such situations and illustrate its application in three problem settings involving (a) airline operations at an airport, (b) taxi service between an airport and a train station, and (c) taxi services from an airport. With data from the third setting (where a matching key was available), we illustrate the robustness of estimates for median and mean times between events under different random rates for “failure to record”, different screening criteria for outliers, and different target times used in the IP objective. The IP model proves to be a tractable and informative tool for data matching and data cleaning, with a wide range of potential applications.     

An efficient and exact event-based algorithm for solving simplified first order dynamic network loading problems in continuous time

In this paper a novel solution algorithm is proposed for exactly solving simplified first order dynamic network loading (DNL) problems for any generalised network. This DNL solution algorithm, termed eLTM (event-based Link Transmission Model), is based on the seminal Lighthill–Witham–Richards (LWR) model, adopts a triangular fundamental diagram and includes a generalised first order node model formulation. Unlike virtually all DNL solution algorithms, eLTM does not rely on time discretisation, but instead adopts an event based approach. The main advantage of this approach is the possibility of yielding exact results. Furthermore, an approximate version of the same algorithm is introduced. The user can configure an a-priori threshold that dictates the approximation error (measurable a-posteriori). Using this approximation the computational effort required decreases significantly, making it especially suitable for large scale applications. The computational complexity is investigated and results are demonstrated via theoretical and real world case studies. Fixed periods of stationary demands are included adopting a matrix demand profile to mimic basic departure time demand fluctuations. Finally, the information loss of the approximate solution is assessed under different configurations.     

The impact of car specifications,prices and incentives for battery electric vehicles in Norway: Choices of heterogeneous consumers

Electric vehicles (EVs), specifically Battery EVs (BEVs), can offer significant energy and emission savings over internal combustion engine vehicles. Norway has a long history of research and government incentives for BEVs. The BEV market in Norway allows us to fully examine consumers’ BEV choices influenced by car specifications, prices and government incentives (public bus lanes access, toll waiver and charging stations). The Random-Coefficient Discrete Choice Model (referred to as the BLP model) is applied to understand the choices of heterogeneous personal consumers and business buyers. Our study is instantiated on the entire EV sales data in Norway from 2011 to 2013, as well as a set of demographics at the municipality level. The results suggest significant positive effects of BEV technology improvement, space, toll waiver and charging station density on EV demand for both personal consumers and business buyers. However, the effects on business buyers may be generally less pronounced than on personal consumers. Interestingly, bus lanes access demonstrates a negative impact for personal consumers, possibly due to consumers’ concern regarding bus lane congestion. In addition, preferences on the BEV price can vary statistically among consumers with different income levels. Compared to the BEV technology development, demographical features and municipal incentives may have generally less impacts on market shares within the BEV market.