基于谐波叠加法的路面不平度重构

对GB/T 7031-2005中提出的路面功率谱密度表达式及等分方法,应用谐波叠加法对路面不平度随机序列进行仿真,使用AR模型谱估计法验证仿真结果.结果表明通过谐波叠加法能很好地拟合路面不平度,且AR模型谱估计具有拟合结果平滑且精度高的特点.     

基于网络的大型造波机运动控制系统

波浪是海岸工程、港口工程、船舶和海洋工程中需要考虑的主要荷载因素.目前研究波浪载荷的主要技术手段是在试验水池放置缩小的结构物模型,并模拟现场的波浪环境,从而实现波浪载荷的精确测量,为工程设计提供科学依据.造波机是试验室模拟波浪环境的关键设备,其运动控制系统的性能直接关系到模型试验的精准度.本文介绍一种基于EtherCA...     

Application of large eddy simulation in the performance study of wave blocker

The configuration and aerodynamic performance of the inlet system are important aspects in the process of installing a gas turbine on a naval vessel. Under the requirements, large eddy simulation （LES） is used to simulate the three-dimensional fluid flow in the wave blocker of a marine inlet filter. The Smagorinsky-Lilly sub-grid model was used to model motions of small-scale structures. During numerical simulation, the SIMPLE algorithm was applied. The central-differencing spatial discretization scheme and the second order accuracy finite difference for the temporal discretization were used. Simulation gives satisfactory distribution of the vorticity fields and turbulent kinetic energy. Compared with the k-ε turbulent model, the results of LES are better for the distribution of parameters. The results of experimental study in a small-scale wind tunnel indicate that numerical calculation has higher accuracy. Therefore, the methods used are worthy of reference and introduction for the design of an inlet system.     

SHEAR WAVE ATTENUATION IN POLY (DIMETHYL SILOXANE) (PDMS)

IntroductionVibration molding is increasingly of impor-tance in polymer processing[1] ,its influences onthe rheological characteristics and the finishedproperties of products mainly depend on the vibra-tion amplitude,frequency and its duration.How-ever,the wave attenuation and its phase shift areinevitable,which causes errors in rheometry,butit is still poorly understood.Therefore,itis neces-sary to study the shear wave propagation anddamping in polymer melt.1　 Experimental Technology1 .1　 …     

京唐港泥沙淤积原因分析

论述了京唐港海区的水动力条件和环境泥沙特性 ,在此基础上 ,对京唐港的泥沙淤积原因进行了分析 ,并由此得出结论 :现状下京唐港平面布局有效地抑制了泥沙的集中淤积现象 ,降低了骤淤碍航的可能性     

波、流共存时的床面剪切力

利用边界层理论 ,导出了波、流共存时的床面剪切力 ,得出综合摩阻系数、综合速度和综合摩阻速度计算公式     

Variational principles in water-wave problems (wave radiation conditions and their variational treatment)

To discuss water-wave problems in unlimited waters, it is important to know what type of wave radiation condition should be placed on a virtual surface corresponding to infinity. For this kind of problem, the Sommerfeld radiation condition is well known. In this article, the condition is extended to treat a case with an incident wave. Furthermore, a more general wave radiation condition is introduced from a different point of view. The above-mentioned wave radiation conditions are introduced into the variational principles of the Kelvin, Hellinnger–Reissner, and Dirichlet type. The Dirichlet-type variational principles are then used in numerical calculations for bending waves in a bar, and the effectiveness of the wave radiation conditions and the variational principles is shown. The numerical results for one-dimensional water-wave problems are then given. As expected, the region required for the numerical solution is reduced drastically compared with that required by the Sommerfeld-type formulation. Furthermore, the amplitude of the diverging wave is obtained in the process of reaching the variational solution. Finally, two-dimensional water-wave problems are briefly discussed. Received: August 9, 2001 / Accepted: September 17, 2001     

航海安全水池三维造波机造波特性与实际波浪模拟应用

对船研所风、浪、流水池造波机的皮特性结合具体工程试验提供一些基本测试参数和使用范围,以波谱形式给出二维不规则波模拟结果,便于今后使用时进行参考。     

车路协同下考虑绿波协调的公交优先控制

在绿波协调控制交叉口群中,为分析公交优先控制对后续交叉口群的扰动,基于车流运行时间偏移分布,以概率期望描述了交叉口各相位绿时左端和右端时长变化引起的后续交叉口群在绿波带内、绿波带间的延误变化;采用组合优化的方法,以交叉口群在车速引导下的公交通行效益优化为上层模型,以交叉口群在公交优先控制下的延误优化为下层模型,对公交引导车速和信号控制参数进行协同优化.通过算例分析表明,公交优先控制模型有效提升了交叉口整体通行效益,最大化减小了对周边交叉口群的不利影响.     

双横臂独立悬架ADAMS建模及运动特性分析

利用ADAMS建立了某轻型车完整的双横臂独立悬架运动学仿真模型,为反映车辆的真实行驶工况,对左、右车轮测试平台分别创建了随机激励。通过仿真分析,揭示了运动特性参数在悬架运动过程中的变化规律,并对原导向机构存在的问题进行了优化计算。结果表明,前轮定位参数在优化前、后的变化量较小,均在设计要求的范围内;轮距和前轮侧向滑移量的变化较大,优化后二者都在理想的范围内变动,达到了预期优化目标。