Mental models of driving and speed: biases,choices and reality

This paper provides a review of research performed by Svenson with colleagues and others work on mental models and their practical implications. Mental models describe how people perceive and think about the world including covariances and relationships between different variables, such as driving speed and time. Research on mental models has detected the time-saving bias [Svenson, O. (1970). A functional measurement approach to intuitive estimation as exemplified by estimated time savings. Journal of Experimental Psychology, 86, 204–210]. It means that drivers relatively overestimate the time that can be saved by increasing speed from an already high speed, for example, 90–130?km/h, and underestimate the time that can be saved by increasing speed from a low speed, for example, 30–45?km/h. In congruence with this finding, mean speed judgments and perceptions of mean speeds are also biased and higher speeds given too much weight and low speeds too little weight in comparison with objective reality. Replacing or adding a new speedometer in the car showing min per km eliminated or weakened the time-saving bias. Information about braking distances at different speeds did not improve overoptimistic judgments of braking capacity, but information about collision speed with an object suddenly appearing on the road did improve judgments of braking capacity. This is relevant to drivers, politicians and traffic regulators.     

深圳地铁永磁同步牵引系统研究分析

牵引传动系统是轨道交通车辆装备实现机电能量转换的“心脏”单元,其性能在某种程度上决定轨道交通车辆的动力品质、能耗和控制特性,是轨道交通车辆节能升级的关键系统。而永磁同步牵引系统以其高效率、高可靠性和低能耗的优势特点,受到轨道交通行业的密切关注。文章阐述深圳地铁10号线永磁同步牵引系统批量装车概况,重点分析永磁同步牵引系统组成及优势,指出推广应用永磁同步牵引系统的经济和社会效益显著。     

艰险山区铁路施工营地建设关键技术问题研究

艰险山区铁路工程沿线地区一般具有自然灾害频发、高原高寒缺氧、建设条件极为困难、施工周期超长等复杂的外部环境。为满足艰险山区铁路施工营地建设“以人文本”需求,给参建人员生活提供适宜安全的环境,基于艰险山区铁路工程施工营地建设的外部环境分析,从房屋材质备选方案比选、营地建设需解决的关键技术问题、节能环保等方面对施工营地建设关键技术问题进行研究,并提出具体的方案与建议。研究成果可为山区铁路及类似工程的施工营地建设提供参考借鉴。     

基于生长曲线函数的货车运营环节碳达峰研究

货车是我国大气环境污染的重要来源之一，也是影响我国碳达峰总体目标实现的重要因 素。本文从货车运营环节入手，在运用生长曲线函数对货车保有量进行预测的基础上，对不同类 型货车的保有量和单车碳排放变化进行研究，并从货车节能技术发展、新能源货车推广和应用进 程两方面入手，分3种情景对货车运营环节中产生的碳排放总量趋势进行预判，推演货车运营环 节的碳达峰时间。研究结果表明，只有同时加快货车节能技术发展以及新能源货车推广和应用 进程，货车运营环节中产生的碳排放总量规模才能得到有效抑制并逐渐减少。若到 2030 年货 车单车燃料消耗水平较 2019 年降低 20%以上，新能源货车在货车整体保有量中的占比达到 20%，到 2060 年货车单车燃料消耗水平较 2019 年降低 50%，新能源货车占比达到 50%，则货车 运营环节碳达峰时间将缩短至2030年左右实现，2030年后货车运营环节产生的碳排放总量规 模将逐渐减少。     

A comparative life-cycle energy and emissions analysis for intercity passenger transportation in the U.S. by aviation,intercity bus,and automobile

Intercity passenger trips constitute a significant source of energy consumption, greenhouse gas emissions, and criteria pollutant emissions. The most commonly used city-to-city modes in the United States include aircraft, intercity bus, and automobile. This study applies state-of-the-practice models to assess life-cycle fuel consumption and pollutant emissions for intercity trips via aircraft, intercity bus, and automobile. The analyses compare the fuel and emissions impacts of different travel mode scenarios for intercity trips ranging from 200 to 1600 km. Because these modes operate differently with respect to engine technology, fuel type, and vehicle capacity, the modeling techniques and modeling boundaries vary significantly across modes. For aviation systems, much of the energy and emissions are associated with auxiliary equipment activities, infrastructure power supply, and terminal activities, in addition to the vehicle operations between origin/destination. Furthermore, one should not ignore the embodied energy and initial emissions from the manufacturing of the vehicles, and the construction of airports, bus stations, highways and parking lots. Passenger loading factors and travel distances also significantly influence fuel and emissions results on a per-traveler basis. The results show intercity bus is generally the most fuel-efficient mode and produced the lowest per-passenger-trip emissions for the entire range of trip distances examined. Aviation is not a fuel-efficient mode for short trips (<500 km), primarily due to the large energy impacts associated with takeoff and landing, and to some extent from the emissions of ground support equipment associated with any trip distance. However, aviation is more energy efficient and produces less emissions per-passenger-trip than low-occupancy automobiles for trip distances longer than 700–800 km. This study will help inform policy makers and transportation system operators about how differently each intercity system perform across all activities, and provides a basis for future policies designed to encourage mode shifts by range of service. The estimation procedures used in this study can serve as a reference for future analyses of transportation scenarios.     

Layout optimization of an inertial energy harvester for miniature underwater mooring platforms

Comprehensive analyses of the layout influence on power performance of a low-frequency miniature horizontal-pendulum-type inertial energy harvester for underwater mooring platforms are presented in this article. The mathematical models are obtained utilizing the Newton-Euler method. The power performance is evaluated by simulations over different parameters, such as damping, excitation frequency, and layout position. Simulation results indicate that the harvester can extract energy from low-frequency excitations over the range of 0.1 Hz–0.4 Hz, and maximum output power can reach to 0.7 W under excitation frequency f = 0.4 Hz. Different layout positions influence the energy harvesting performance of the harvester dramatically. Changing the layout position to positive value can enhance and broaden the power performance. The amplitude responses with different layout positions do not show resonant characteristics, even near the natural frequency of the harvester, due to large amplitude vibrations and strong nonlinear characteristic. As excitation frequency f = 0.4 Hz, there is a zero output power point appears at layout position d = −1.3 m. Moreover, the harnessed power has a quadratic relationship with the layout position value.     

基于云平台的城市轨道交通能源管理系统

阐述了基于云平台的城市轨道交通能源管理系统架构和建设方式。该系统利用云计算的高效和弹性来部署建设,采用线网-车站二层管理模式,降低了线网和线路服务器等的硬件部署成本和维护成本。通过将能源管理系统内部使用的业务应用转换为基于云平台的能源管理应用软件,能源管理系统可获取云平台提供的共享数据,并将经过业务处理后的数据存储到云平台中,以服务于云平台上其他业务,实现了数据资源的逻辑统一和高效利用。     

基于FLAC软件模拟强夯加固吹填砂地基

基于港区陆域吹填项目,采用FLAC软件建立三维模型,模拟了不同夯能、夯击次数对强夯效果的影响,对强夯前后杨氏模量的变化进行了分析研究。结果表明,表层吹填砂厚度和下卧软土层分布对夯能的大小起着决定作用。对于下卧松散砂层,可适当加大夯击能量和夯击次数(7~8击),增加其处理深度和效果;而对于下卧软黏土层,可以适当减小夯击能量并增加夯击次数,以提高加固效果。夯击之后,表层吹填砂的杨氏模量有较大的提高,从原来的10 MPa提高到20~40 MPa。     

The impact of land-use mix on residents' travel energy consumption: New evidence from Beijing

Policies that encourage mixed land use are widely believed to make transport more energy efficient. However, few studies have directly examined the impacts of land-use heterogeneity on travel energy consumption at the individual level. Moreover, the definition and measures of land-use heterogeneity are debated. This paper aims to fill these gaps using the large city of Beijing, China, as a case study. Three types of land use are examined in terms of their effects on individual residents’ travel energy consumption. The results suggest that high land-use diversity and a good jobs-housing balance significantly reduces commuting travel. Interestingly, highly heterogeneous retail and housing areas may have high travel energy use, as residents are more likely to go shopping. There are obvious spatial variations in these effects. Residents of suburban ‘newtowns’, where the jobs-housing balance is particularly good, consume less travel energy. The results suggest that decreased use of conventional planning patterns, such as the socialist danwei system, and increasing urban sprawl, bring new challenges to achieving transport efficiency. Mixed land-use policies can be an effective solution to these challenges.     

废气旁通阀开度对增压直喷汽油机部分负荷性能的影响

汽油机节气门产生的节流损失对增压发动机泵气损失的影响相当严重,尤其是在中小负荷时,针对这一问题采用试验的方法研究了中小负荷下旁通阀开度对增压直喷汽油机性能的影响。研究结果表明,在节气门开度较小的小负荷工况下,涡轮增压器不宜工作,否则排气背压过大,对发动机非常不利;而废气旁通阀全开可以减小排气背压,能使发动机的动力性和经济性提高3%左右。对废气旁通阀的合理控制可以实现发动机在自然吸气和涡轮增压两种模式之间的转换。