Technical Note: Force Control in Electrohydraulic Active Suspensions Revisited

The inner loop control for the actuator force can be quite simply compensated by means of a correction term to the desired force signal at the input. The correction requires only a measurement of the actuator piston velocity and is employed to cancel the loop disturbance caused by the oil flow to the actuator. Although an additional time constant is introduced by the integration in the inner loop force control, the overall performance is nevertheless quite close to that of an ideal optimal system.     

Optimal selection of suspension parameters in large scale vehicle models

Optimum values are selected for the suspension damping and stiffness parameters of complex car models, subjected to road excitation, by applying suitable numerical methodologies. These models result from a detailed finite-element discretisation and possess a relatively large number of degrees of freedom. They also involve strongly nonlinear characteristics, due mostly to large rigid body rotation of some of their components and the properties of the connection elements. First, attention is focused on gaining some insight into the dynamics of the mechanical models examined, resulting when the vehicle passes over roads involving typical geometric profiles. Then, the emphasis is shifted to presenting results obtained by applying appropriate optimisation methodologies. For this purpose, three classes of design criteria are first set up, referring to passenger ride comfort, suspension travel and car road holding and yielding the most important suspension stiffness and damping parameters. Originally, the optimisation is performed by forming a composite cost function and employing a single-objective optimisation method. Since the design criteria are conflicting, a multi-objective optimisation methodology is also set up and applied subsequently.     

A multiobjective model for maximizing fleet availability under the presence of flight and maintenance requirements

Every aircraft, military or civilian, must be grounded for maintenance after it has completed a certain number of flight hours since its last maintenance check. In this paper, we address the problem of deciding which available aircraft should fly and for how long, and which grounded aircraft should perform maintenance operations, in a group of aircraft that comprise a combat unit. The objective is to achieve maximum availability of the unit over the planning horizon. We develop a multiobjective optimization model for this problem, and we illustrate its application and solution on a real life instance drawn from the Hellenic Air Force. We also propose two heuristic approaches for solving large scale instances of the problem. We conclude with a discussion that gives insight into the behavior of the model and of the heuristics, based on the analysis of the results obtained.     

IG541混合气体灭火系统在成都地铁中的应用研究

根据地下轨道交通的消防特点,结合成都地铁工程设计实例,对气体灭火系统的控制及操作方式进行深入介绍,并着重论述气体消防系统在地铁设计中的应用:从环保、安全、经济、灭火效率及对被保护对象影响等方面对七氟丙烷与IG541混合气体进行比较,具体分析两种气体环保指标ODP、GWP、ALT值和对人员安全性指标LOAEL、NOAEL、LC50值,得出IG541混合气体适合于地铁地下车站的气体灭火系统的结论。     

A numerical investigation of the impact of turbulence on the feeding rates of Oithona davisae

Individual based numerical simulations of the copepod, Oithona davisae, feeding on motile prey, Oxyrrhis marina, under variable turbulent conditions are performed. These simulations correspond to laboratory observations conducted by Saiz et al. [Saiz, E., Calbet, A., and Broglio, E., 2003. Effects of small-scale turbulence on copepods: the case of Oithona Davisae. Limnol. Oceanogr., 48:1304–1311.].The flow field in the simulation is reconstructed by a kinematic simulation whose characteristic scales are derived from the grid mesh and the dissipation rates of the laboratory experiments. The kinematic simulation provides a simplified model, which while not fully realistic, captures the basic relevant feature of turbulence. A hop and sink swimming behaviour is prescribed for O. davisae, while O. marina moves along helical paths with random changes of directions.Three possible effects are tested: the existence of a time threshold in the duration of the contacts between predator and prey, a progressive reduction of the perceptive distance with increasing turbulence level and an abrupt reduction in feeding of O. davisae when the flow speed, in relation to the copepod position, is higher than a prescribed threshold. This last approach introduces an intermittency in the feeding which depends on the variations of velocity both in space and time within the numerical box.The introduction of the time threshold causes a dome-shaped relationship between the simulated enhancement factor and the dissipation rate, while with the other two effects, a monotonic decrease in the enhancement factor is observed, with values reasonably close to the ones observed in the laboratory experiment. In all the cases, the use of realistic values of biological parameters (e.g. swimming behaviour) reproduces response curves in the range of the observations.     

系统效能通用评估工具研究

基于数据库和算法集成,设计了一套具有良好通用性、灵活性、可扩展性的系统效能评估工具,并以此工具为基础,针对不同的评估需求、数据量和应用环境提出对应的解决方案.     

Flexible long range planning using low cost information

Contemporary transport planning requires a flexible modelling approach which can be used to monitor the implementation of a long term plan checking regularly its short term performance with easily available data; the original model is periodically updated using low cost information and this allows the evaluation of the changes to the plan which may be required. Such an approach requires models suited to regular updating and to the use of data from different sources. Models to update trip matrices from traffic counts have been available for some time; however, the estimation and/or updating of other model stages with low cost data has escaped analytical treatment. The paper discusses this idea and formulates the updating problem for an example involving a joint destination/mode choice model under various assumptions about the nature of the available data. Analytical solutions are proposed as well as some general conclusions.requests for offprints     

Alternative Modeling Approaches Used for Examining Automobile Ownership: A Comprehensive Review

Abstract

Household vehicle ownership, and the associated dimensions including fleet size, vehicle type and usage, has been one of the most researched transport topics. This paper endeavors to provide a critical overview of the wide-ranging methodological approaches employed in vehicle ownership modeling depending on the ownership representation over the past two decades. The studies in the existing literature based on the vehicle ownership representation are classified as: exogenous static, exogenous dynamic, endogenous static and endogenous dynamic models. The methodological approaches applied range from simple linear regressions to complex econometrics formulations taking into account a rich set of covariates. In spite of the steady advancement and impressive evolution in terms of methodological approaches to examine the decision process, we identify complex issues that pose a formidable challenge to address the evolution of vehicle ownership in the coming years. Specifically, we discuss challenges with data availability and methodological framework selection. In light of these discussions, we provide a decision matrix for aiding researchers/practitioners in determining appropriate model frameworks for conducting vehicle ownership analysis.     

Measuring community reaction to urban transportation impacts using Von Neumann‐Morgenstern utility theory

This paper attempts to measure the impacts of urban transportation system improvements or changes on the community. The community's perceptions of the impacts are represented by its utilities (or disutilities) over various ranges of values of the multiple attributes representing these impacts. The utility technique used in the evaluation is based upon von Neumann‐Morgenstern (vN‐M, 1947) Utility Theory, and is applied using Raiffa's (1970) Fractile Method.

The paper specifically applies the technique to model the perceptions of five subgroups within a community to the impact of a new light rail transit system that is being incorporated in the transportation system of the City of Calgary.

Results of the modeling indicate explicitly how the community changes its perception over ranges of values of the attributes evaluated. Biases of various subgroups within the community over these attributes are also shown. Statistical tests indicate that aggregated utility perceptions can represent the utility perceptions of the individual subgroups quite reasonably.     

Role of Bus‐Based Park and Ride in the UK: A Temporal and Evaluative Review

Abstract

The number of bus‐based Park and Ride (P&R) schemes in the UK has grown substantially over the past 40 years as a result of its encouragement by the Government as a tool to deal with increasing traffic congestion and traffic‐related pollution. The aim of this article is to analyse the degree to which P&R is effective in the contemporary policy context. The authors identify phases of development of P&R since its emergence as a local solution to transport capacity constraints in historic towns. Policy goals are identified against which a review of literature is used to highlight its effectiveness. It is concluded that P&R may increase the distance travelled by its users due to low load factors on dedicated buses, public transport abstraction and trip generation, although it is highlighted that there are areas in which further research is required to clarify its impacts.