喷锚支护的时间效应与空间效应

喷锚支护是新奥法构筑隧道的主要支护手段，为使喷锚支护与围岩形成共同承载结构，必须在适宜的时机及根据适当的围岩变位量来确定恰当的喷锚支护结构。     

钢管混凝土拱桥空间稳定分析

介绍了大跨度钢管混凝土拱桥空间稳定分析方法。基于有限元理论,考虑结构的几何非线性和材料非线性,建立了某中承式钢管混凝土拱桥的计算模型,运用ANSYS软件对该桥施工过程和运营阶段的稳定性进行了模拟计算,其结果为大桥的设计和施工提供了理论依据。     

钢管混凝土拱空间极限承载力高精度分析

采用考虑材料非线性的钢管混凝土拱空间极限承载力计算方法对1个X型双肋拱与1个平行双肋拱进行了空间极限承载力计算。在该方法中，对钢管混凝土拱结构采用纤维单元模型，该模型假定钢管与混凝土完全粘接，钢管对核心混凝土的套箍作用体现在以一维形式表达的核心混凝土的应力-应变关系曲线之中，针对材料非线性分析中单元内各点刚度参差不齐的特点，采用单元内设小元的方法(相当于子结构)，编制了非线性有限元程序，在该程序中，计算模型完全是基于小元层次进行的，比如单元刚度矩阵由小元刚度矩阵凝聚而成，单元节点的残余力由小元节点的残余力构成，故只需改变单元内小元个数这1个参数就可实现对结构的重新划分且极大地降低了非线性方程组的阶数，非常方便且实用。在程序计算结果得到模型试验结果验证的基础上，还对不同的横撑根数对结构空间极限承载力的影响进行了分析。     

Continuum theory for pedestrian traffic flow: Local route choice modelling and its implications

This contribution puts forward a novel multi-class continuum model that captures some of the key dynamic features of pedestrian flows. It considers route choice behaviour on both the strategic (pre-trip) and tactical (en-route) level. To achieve this, we put forward a class-specific equilibrium direction relation of the pedestrians, which is governed by two parts: one part describing the global route choice, which is pre-determined based on the expectations of the pedestrians, and one part describing the local route choice, which is a density-gradient dependent term that reflects local adaptations based on prevailing flow conditions.Including the local route choice term in the multi-class model causes first of all dispersion of the flow: pedestrians will move away from high density areas in order to reduce their overall walking costs. Second of all, for the crossing flow and bi-directional flow cases, local route choice causes well known self-organised patterns to emerge (i.e. diagonal stripes and bi-directional lanes). We study under which demand conditions self-organisation occurs and fails, as well as what the impact is of the choices of the different model parameters. In particular, the differences in the weights reflecting the impact of the own and the other classes appear to have a very strong impact on the self-organisation process.     

航母飞行作业空间安全布局研究

研究针对航空母舰飞行作业空间安全问题而开展。研究首先根据作业特点划分航母作业区域，针对飞行作业分析构成空间危害因素的来源，提出一套度量危险因素的空间关联安全水平指标，以便对危险因素的空间关系进行量化；然后在此基础上，对2套不同起飞作业布局进行安全评价；最后，并围绕航母飞行甲板作业空间安全的典型问题进行分析和讨论。     

The load-dependent vehicle routing problem and its pick-up and delivery extension

The present paper examines a Vehicle Routing Problem (VRP) of major practical importance which is referred to as the Load-Dependent VRP (LDVRP). LDVRP is applicable for transportation activities where the weight of the transported cargo accounts for a significant part of the vehicle gross weight. Contrary to the basic VRP which calls for the minimization of the distance travelled, the LDVRP objective is aimed at minimizing the total product of the distance travelled and the gross weight carried along this distance. Thus, it is capable of producing sensible routing plans which take into account the variation of the cargo weight along the vehicle trips. The LDVRP objective is closely related to the total energy requirements of the vehicle fleet, making it a credible alternative when the environmental aspects of transportation activities are examined and optimized. A novel LDVRP extension which considers simultaneous pick-up and delivery service is introduced, formulated and solved for the first time. To deal with large-scale instances of the examined problems, we propose a local-search algorithm. Towards an efficient implementation, the local-search algorithm employs a computational scheme which calculates the complex weighted-distance objective changes in constant time. Solution results are presented for both problems on a variety of well-known test cases demonstrating the effectiveness of the proposed solution approach. The structure of the obtained LDVRP and VRP solutions is compared in pursuit of interesting conclusions on the relative suitability of the two routing models, when the decision maker must deal with the weighted distance objective. In addition, results of a branch-and-cut procedure for small-scale instances of the LDVRP with simultaneous pick-ups and deliveries are reported. Finally, extensive computational experiments have been performed to explore the managerial implications of three key problem characteristics, namely the deviation of customer demands, the cargo to tare weight ratio, as well as the size of the available vehicle fleet.     

Including congestion effects in urban road traffic CO2 emissions modelling: Do Local Government Authorities have the right options?

Tailpipe emissions from vehicles on urban road networks have damaging impacts, with the problem exacerbated by the common occurrence of congestion. This article focuses on carbon dioxide because it is the largest constituent of road traffic greenhouse gas emissions. Local Government Authorities (LGAs) are typically responsible for facilitating mitigation of these emissions, and critical to this task is the ability to assess the impact of transport interventions on road traffic emissions for a whole network.This article presents a contemporary review of literature concerning road traffic data and its use by LGAs in emissions models (EMs). Emphasis on the practicalities of using data readily available to LGAs to estimate network level emissions and inform effective policy is a relatively new research area, and this article summarises achievements so far. Results of the literature review indicate that readily available data are aggregated at traffic level rather than disaggregated at individual vehicle level. Hence, a hypothesis is put forward that optimal EM complexity is one using traffic variables as inputs, allowing LGAs to capture the influence of congestion whilst avoiding the complexity of detailed EMs that estimate emissions at vehicle level.Existing methodologies for estimating network emissions based on traffic variables typically have limitations. Conclusions are that LGAs do not necessarily have the right options, and that more research in this domain is required, both to quantify accuracy and to further develop EMs that explicitly include congestion, whilst remaining within LGA resource constraints.     

Walking accessibility and property prices

Walking is an imperative travel mode, especially for short trips. Walking accessibility, which is defined as the ease of reaching essential destinations in the walk-in catchment area, may affect property prices because residents are more likely to be willing to pay for this attribute. In addition, different categories of public services may have varied influencing directions and magnitude. These two hypotheses are tested in this study. Taking Xiamen, China as a case study, we estimate the cumulative opportunities of public services on foot and develop a set of hedonic pricing models (more specifically, two pre-specified ordinary least squares models, four Box-Cox transformed models, and two spatial econometric models) to estimate, whether and to what extent, walking accessibility contributes to price premiums (or discounts). Using a database of 22,586 second-hand residential properties in 358 multi- or high-storey residential complexes, we find that (1) walking accessibility to public services contributes to the variations in housing prices and plays a role in determining housing prices; (2) different categories of services have vastly divergent, even opposite, influencing impacts; and (3) walking accessibility to primary schools, commercial centers, and sports and cultural centers have positive effects on house prices whereas walking accessibility to comprehensive hospitals adversely affects housing prices. Methodologically, we confirm that spatial econometric methods improve estimation accuracy and have more explanatory power relative to the standard non-spatial models. Robustness check analysis further guarantees the plausibility of this study.     

Local joint flexibility of tubular X-joints stiffened with external ring or external plates

In the present paper, the Local Joint Flexibility (LJF) of the ring-stiffened X-joints and plate-stiffened X-joints under compressive load is investigated. In the first phase, a finite element (FE) model was generated and verified with the results of available experimental tests and equations. In the next phase, a set number of 234 FE models were created to evaluate the role of the external ring size (β_r and τ_r), the external plate size (β_p and τ_p), and the connection geometry (γ, τ, and β) on the LJF factor (f_LJF). In these FE models, the weld connecting the chord and brace members was generated. The results indicated that the f_LJF of a plate stiffened joint can be down to 76% of the f_LJF of the corresponding un-stiffened joint. Also, the effect of the ring size on the f_LJF was more than the effect of the plate size on the f_LJF, because of the stiffener position. Despite the notable effect of the ring and the plate on the f_LJF, there is not any study or formula on tubular connections stiffened with ring or plate. Therefore, the FE results were used to propose two parametric formulas for determining the f_LJF in X-joints with external ring or external plate under brace compressive load. Moreover, the derived formulas were checked based on the UK DoE acceptance criteria.     

The vulnerability of the environment to spills of dangerous substances on highways: A diagnosis based on multi criteria modeling

Highways and freeways are the main infrastructure channel used to transport cargo in Brazil. This cargo often includes dangerous chemical products which can, in the event of an accident, negatively impact the environment. The development and implementation of tools for the rapid diagnosis of environmental vulnerability in the transportation of dangerous goods has been studied. However, for highways and freeways there is a lack of studies based on environmental attributes, and not just based on statistical data which demands a specific period for collection and analysis and only after that the implementation of preventive measures. Thus, evaluation grounded on multiple criteria embedded in Geographic Information System (GIS) has significant potential for the practical implementation of risk management of road transportation of dangerous goods. This study has determined the environmental vulnerability of route BR 050, specifically the segment between the cities of Uberlândia and Uberaba in the state of Minas Gerais, where multi criteria analysis has been efficient in determining the most vulnerable areas. The main attributes analyzed were the drainage density, soil type and geology, determining that in case of an accident with dangerous substances the regional environment would be immediately affected, and so endorsing the use of this tool in many segments involved in environmental management of highway enterprises.