新造船能效设计指数及其对船舶设计的影响

根据国际海事组织(IMO)海上环境保护委员会(MEPC)关于船舶能效设计指数(EEDI)的议题和结论,对目前市场上主流的三型散货船和三型油船进行了计算分析,得出的结论有一定的实用性,为船舶开发设计人员提供了一定的参考.     

Nano-surface Engineering for Remanufacturing Application

IntroductionWith the rapid development of the world econ-omy, the quantity of waste machinery and elec-tronic products (WMEPs) is increasing at astartling speed. Consequently, the problems of de-stroyed ecological environment, environmental pol-lution, and resource waste have appeared promi-nently. According to the announced statistics morethan 70% discharge that results in the world envi-ronment pollution comes from the manufacturingindustry. 55 hundred million harmless wastes and7 hundred …     

The Evaluation and Selection of Outsourcing Suppliers in Mass Customization （MC）

Many MC companies find it necessary to cooperate with a large number of outsourcing suppliers to provide MC products according to customers＇ diversified orders. To this end, how to select competitve suppliers for the outsourcing manufacturing of non-core processes is the key to establish strong supply chain ally of MC company as well as make the company more efficient in its core manufacturing processes. A procedure of selecting outsourcing suppliers was presented to identify and find competitive suppliers. The continuous improvement of this procedure was proposed to ensure the optimal supply chain of MC company in the long run. Besides, a multi-criteria evaluation model in the procedure was set up according to MC＇s characteristic with fuzzy multi-criteria methods combined to solve the fuzzy problems of criteria weight and qualitative attribute value. A case study of MC manufacturing company was provided to show that the procedure ,model and methods are effective to select outsourcing suppliers.     

Performance Evaluation of List Sphere Detector

IntroductionThis paper aims to address two problems ithe design of“list sphere detector”(LSD)[1]insystem with no system-level iteration between thMIMO detector and the channel decoder. The firsproblem is how to reduce its complexity. Here it ishown that a much smaller list size can be used ithe soft output is approximated appropriately. Alist size of 40 is adequate for a 4× 4 16QAMVBLAST MIMO system. Compared to a 1 02long list used for the same system in Ref.[1], thilist size redu…     

Two Models of DMFC under Effects of Cathode Humidification Temperature and Anode Flow Rate

This paper introduced a novel self-adjustment of parameters of fuzzy neural networks. Then, the effects of cathode humidification temperature and anode flow rate on the performance of direct methanol fuel celI（DMFC） were described respectively. Two dynamic performance models of DMFC under the influences of cathode humidification temperature and anode flow rate were established separately based on fuzzy neural networks. The simulation results show the accuracy of the models established is satisfactory.     

Splitting Balanced Incomplete Block Designs with Block Size 2×k

This paper investigated the existence of splitting balanced incomplete block designs with blck size 2 ×k.The necessary conditions for such a design are λ(v-1)≡0(mod k),and λv(v-1 )≡0 (mod 2k 2). It will show that the above necessary conditions are also sufficient for k = 3 with the definite exception(v,λ)= (10,1) and with several possible exceptions.     

Synthesis and Characterization of Polyurethane and Epoxy Resin Interpenetrating Polymer Network

A series of Polyurethane (PU)/bisphenol A based Epoxy Resin (EP) Interpenetrating Polymer Networks(IPN) were synthesized and characterized by SEM, DSC, TGA and DMTA. It was found that IPN shows the best compatibility and damping properties when the ratio of PU/EP is 80 to 20. The results show that chain-extender and higher molecular weight of PPG are able to improve the properties of compatibility, damping and thermal properties.     

对桥梁两种橡胶支座减隔震性能的理论分析

笔者在文中对桥梁板式橡胶支座和铅芯橡胶支座在建立线弹性模型基础上,利用减隔震设计原理对其性能进行理论分析.在指出板式橡胶支座的不足之后,进一步对铅芯橡胶支座的主要参数如初始刚度、屈服刚度、铅芯直径等对其减隔震功能的影响进行了分析.通过分析指出铅芯橡胶支座的优点以及它是如何克服了板式橡胶支座不足的.     

基于多端口串行Flash的超长条形LED显示屏控制

为了不增加硬件成本而提高显示数据的输出速度,在分析现有条形LED显示屏单元板电路的基础上,提出了一种基于多端口串行Flash存储器的LED显示控制系统,该系统由STC12C5616高速1T单片机和带SPI接口的SST26VF016B串行多端口Flash存储器组成.显示数据输出时,利用单片机的高速同步串行口(SPI)高速时钟,将多端口串行Flash存储器中的显示数据以"存储器直接存取(DMA)"的方式直接输出至超长条形LED显示屏.最后,以4 096×64点阵单色LED显示屏为例进行了测试.结果表明,显示屏刷新率达到62.5 Hz,验证了该系统在实际应用中的有效性和可行性.     

船舶建造焊缝缺陷DRT与常规胶片RT的等效性分析

针对船舶建造中的平对接焊缝,采用不同厚度钢材料母材,分别进行数字射线检测(Digital Radiography Testing, DRT)和常规胶片射线检测(Radiography Testing, RT)的检测技术标准等效性要求对比和检测等效性试验,并对试板焊缝缺陷的DRT和常规胶片RT进行评定。结果表明,DRT与常规胶片RT具有等效性。