Instantaneous communication throughputs of vehicular ad hoc networks

Vehicular ad hoc networks (VANETs) formed by connected vehicles in a traffic stream could be applied to improve safety, mobility, and environmental impacts of a transportation system. In this paper, we present analytical models for the instantaneous communication throughputs of VANETs to measure the efficiency of information propagation under various traffic conditions at a time instant. In particular, we define broadcast and unicast communication throughputs by the wireless channel bandwith multiplied by the average probabilities that one vehicle is a successful receiver and sender in a VAENT, respectively. With a protocol communication model, we derive formulas to determine the probabilities for an equipped vehicle to be a successful broadcast receiver and a successful unicast receiver/sender, and obtain broadcast and unicast throughputs along discrete and continuous traffic streams. We further examine the impacts on communication throughputs of the transmission range and the interference range of dedicated short range communication devices as well as the market penetration rate of equipped vehicles and the percentage of senders. Finally, we investigate the influence of shock waves on communication throughputs.     

规则波作用下沙质岸滩剖面演变研究*

为了探究规则波作用下沙质岸滩的形态变化,在波浪水槽中构建沙质岸滩剖面的演变过程。发现在规则波作用下,沙质岸滩会出现沙坝峰,存在从单一沙坝峰到双沙坝峰的演变过程,且沙坝形成后并非静止不动,而是随时间变化存在离岸和向岸的往复运动。探究水深、周期和植被覆盖对沙质岸滩变化的影响,对其最大冲刷深度、最大淤积深度、冲刷面积和淤积面积进行讨论分析。结果显示,水深的增大会导致沙坝向岸运动,周期的增大会导致岸滩趋于紊乱,植被覆盖对岸滩有稳定作用。     

应用广义最大覆盖模型进行公路养护应急中心布局选址研究

应用广义最大覆盖模型方法在江西省国省道公路网络中进行公路养护应急中心布局选址,将养护应急中心设置在县级及以上行政中心点上,在点的服务半径已知的条件下,求解如何设立数量最少的点便可覆盖所有区域.     

基于GRNN的GSM-R场强覆盖预测算法

在比较Hata模型修正方法和GRNN算法场强覆盖预测效果的基础上,仿真分析了训练集构成和平滑因子选择对GRNN算法预测效果的影响,给出了训练集构成和平滑因子选择的方法;提出了电波传播环境相似系数来表征GRNN模型在不同环境下的适用性。仿真结果表明,两种传播环境的相似系数越大,由一种环境下测试数据确定的GRNN在另一环境下的预测精度越高。     

市场经济下公路工程机械台班定额问题的探讨

《公路工程机械台班费用定额》是公路机务管理工作的关键性基础文件之一。随着公路工程机械被推向市场，现行《定额》编制依据的不合理成份日趋增多，使用弊端也愈加突出。本文通过对《定额》现状的分析，提出了试图适合市场经济发展，有利于维持机械简单再生产的“指数定额”。     

我国摩擦材料设备的技术与市场定位

介绍了加拿大3家公司(CORSTEEL公司、CTP公司、AE公司)摩擦材料的生产工艺、生产设备以及相关附件、模具的生产规模,结合我国摩擦材料行业设备、模具、背板和附件的供应体系现状,对我国摩擦行业发展提出了更高的要求,即如何造出精品、树立品牌及发展相应附件使之规模化、专业化等。从加拿大设备和模具制造、压机的特点、模具厂的生产规模、背板生产的自动化、专用设备和测试设备等方面与我国目前的现状进行了对比分析。最后对我国摩擦材料专用设备的技术与市场定位进行了预测。     

Optimizing the locations of electric taxi charging stations: A spatial–temporal demand coverage approach

Vehicle electrification is a promising approach towards attaining green transportation. However, the absence of charging stations limits the penetration of electric vehicles. Current approaches for optimizing the locations of charging stations suffer from challenges associated with spatial–temporal dynamic travel demands and the lengthy period required for the charging process. The present article uses the electric taxi (ET) as an example to develop a spatial–temporal demand coverage approach for optimizing the placement of ET charging stations in the space–time context. To this end, public taxi demands with spatial and temporal attributes are extracted from massive taxi GPS data. The cyclical interactions between taxi demands, ETs, and charging stations are modeled with a spatial–temporal path tool. A location model is developed to maximize the level of ET service on the road network and the level of charging service at the stations under spatial and temporal constraints such as the ET range, the charging time, and the capacity of charging stations. The reduced carbon emission generated by used ETs with located charging stations is also evaluated. An experiment conducted in Shenzhen, China demonstrates that the proposed approach not only exhibits good performance in determining ET charging station locations by considering temporal attributes, but also achieves a high quality trade-off between the levels of ET service and charging service. The proposed approach and obtained results help the decision-making of urban ET charging station siting.     

中日汽车工业的发展变化比较

近年来，作为国民经济支柱产业的汽车工业飞速发展，增长幅度令世界瞩目。文章介绍了中国和日本汽车工业的发展，并对中日两国汽车工业在汽车密度、汽车保有量及千人汽车拥有量等方面进行了比较，指出虽然我国与日本相比相差甚远，但我国汽车市场前景广阔，汽车产销量在未来的3～5年内会跃居世界首位，成为汽车工业强国。     

市场经济下的工程量清单计价与定额计价的思考

我国的工程造价长期以来按照传统的定额模式进行计价，目前推行工程量清单计价模式。工程量清单计价模式实行量价分离，由企业根据自身情况按市场规律自主报价，但是，工程量清单计价模式在并不成熟的市场经济条件下还不能彻底取代传统的定额计价模式，按定额编制概（预）算的造价管理方法仍然具有不可替代的作用，尽管如此，工程量清单计价的推行乃大势所趋。     

2011年上半年发动机活塞市场分析及2011年下半年预测

通过分析我国2011年上半年发动机活塞市场产销情况和特点,预测2011年下半年发动机活塞市场产销情况。文章采用统计和对比的方法,对2011年上半年发动机活塞市场进行了分析——2011年上半年发动机活塞市场整体呈现了放缓的态势,活塞企业经营压力进一步增加。指出2011年全年发动机活塞市场呈“烟斗型”趋势,2011年下半年车用发动机活塞市场产销总体上仍将与2011年上半年持平。