Evaluation of pedestrian crosswalk level of service (LOS) in perspective of type of land-use

In India pedestrians usually cross the road at mid-block crosswalks due to ease of access to their destination or the development of adjacent land use types such as shopping, business areas, school and residential areas. The behaviour of pedestrian will change with respect to different land use type and this change in behaviour of pedestrian further reflects change in perceived level of service (LOS). So, it is important to evaluate the quality of service of such crossing facilities with respect to different land-use type under mixed traffic conditions. In this framework, pedestrian perceived LOS were collected with respect to different land-use type such as shopping, residential and business areas. The ordered probit (OP) model was developed by using NLOGIT software package, with number of vehicles encountered, road crossing difficulty as well as safety considered as primary factors along with pedestrian individual factors (gender and age), land-use type and roadway geometry. From the model results, it has been concluded that perceived safety, crossing difficulty, land-use condition, number of vehicles encountered, median width and number of lanes have significant effect on pedestrian perceived LOS at unprotected (un-signalized) mid-block crosswalks in mixed traffic scenario. The inferences of these results highlights the importance of land use planning in designing a new set of pedestrian access facilities for unprotected mid-block crosswalks under mixed traffic conditions. Also the study results would be useful for evaluating pedestrian accessibility taking into account different land-use type and planning required degree of segregation with vehicular movement at unprotected mid-block crosswalk locations.     

基于CFD技术的暖风芯体结构设计与优化分析

某在研改款商用车空调箱暖风芯体单体换热性能较差,根据对标件初步优化后发现其换热性能更差,因此进行CFD定性仿真分析。通过流体分析研究发现基础模型芯体内部各扁管流量分配不均,初步优化后扁管流量分配更加不均匀,极大地降低了其换热性能,与试验反馈结果一致。根据流场仿真结果对其水室结构逐步优化,使得扁管流量分配比例的标准差值各工况下均提升了44%以上且芯体内流阻降低了约一倍。最终通过试验验证,单芯体的换热性能提高了3%-8%,满足了设计要求。     

牵引车车架横梁开裂分析及优化改善

针对某牵引车车架横梁开裂事件,使用Creo构建整车三维模型,导入Hyperworks中进行前处理网格划分等,使用Optistruct进行求解得出弯曲、制动、左转弯、右转弯、扭转、扭转+转弯工况等分析结果,将结果与实际开裂情况进行了对比,结果表明在扭转+转弯工况下第三横梁开裂,与分析结果一致,并提出横梁优化方案进行求解,分析结果表明在扭转+转弯工况下,第二横梁最大应力值降低38.1%,第三横梁最大应力值降低64.3%,提出后续牵引车设计时横梁优化意见及注意事项。     

FSAE赛车前悬架运动学仿真及参数优化

运用Catia软件建立某FSAE赛车前悬架三维模型,并将Catia中的坐标转换成Adams软件中的坐标,建立Adams前悬架模型。针对该FSAE赛车前悬架进行双轮跳动运动学仿真,并对悬架传递比和前轮定位参数进行参数优化。     

城市公交线路模态工况构建方法研究

采用GPS设备对西安城市公交典型线路的运行工况进行实测,分别运用瞬态转模态方法和多目标优化法构建出城市客车模态工况。以8个特征参数相对误差为标准,对两种方法的精度进行了对比研究。研究表明,两种方法均能有效地完成工况构建,其中多目标优化法精度最高,瞬态转模态方法简单快捷,从而为工况构建方法的选取提供了思路和数据验证。     

进气系统的优化设计

FSAE赛车发动机进气系统结构参数影响充气效率。文章利用软件FLUENT对进气系统模型进行流场仿真,分析进气系统流场压力、速度等参数分布规律,研究进气歧管流量分布的均匀性,到达优化进气系统的目的。     

基于ADAMS的双横臂独立悬架的仿真分析及优化设计

在现有的汽车前悬架数据的基础上,用ADAM S/VIEW模块建立悬架模型,并对模型进行仿真计算,研究分析汽车运动中悬架随车轮上下跳动时定位参数的变化规律,评价悬架数据合理性。采用优化分析对悬架不合理数据进行优化,进一步改善悬架系统性能,以提高产品开发质量。     

基于模拟退火-自适应布谷鸟算法的城市公交调度优化研究

为改善城市常规公交运营效率,提出基于模拟退火-自适应布谷鸟算法的公交调度优化模型.通过结合线路实际客流数据反映的客流特征,建立考虑公交公司和乘客双方利益的公交调度优化模型;改进布谷鸟算法固定步长并加入模拟退火算法退火操作,设计模拟退火-自适应布谷鸟算法,改善寻优过程中跳出局部最优解而全局寻优的能力;以福州125路公交线...     

大型汽车滚装船固定坡道结构分析及优化

针对某大型汽车滚装船在运营过程中一坡道发生较严重裂纹的问题,利用MSC.Patran软件对坡道结构进行细化有限元分析,计算歪斜工况下的屈服强度,分析应力分布情况并对应力不满足的结构进行改进,裂纹发生的位置与细化有限元分析结果一致,表明对汽车滚装船所有坡道结构做细化有限元分析十分必要.     

基于船舶焊接工艺优化设计的探讨分析

文章主要以船舶焊接工艺为研究对象,针对传统焊接工艺的焊接效率低、焊接易变形且不能得到很好的控制等问题与不足,从船舶焊接工艺的质量要求出发,探讨分析出一种船舶修造中的高效焊接工艺,介绍了其设计方案和焊接流程,并从检测结果等方面论证了该焊接工艺具有焊接质量好、经济成本低、焊接效率高、焊接变形能得到很好的控制等优点.